• 제목/요약/키워드: Relative performance evaluation

검색결과 510건 처리시간 0.188초

$GafChromic^{(R)}$ EBT2 Film Dosimetry를 위한 품질 관리용 초기 프로그램 개발 (Development of Preliminary Quality Assurance Software for $GafChromic^{(R)}$ EBT2 Film Dosimetry)

  • 박지연;이정우;최경식;홍세미;박병문;배용기;정원균;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제21권1호
    • /
    • pp.113-119
    • /
    • 2010
  • GafChromic EBT2 필름 dosimetry에 필요한 품질 관리용 소프트웨어를 개발하였다. 개발한 프로그램에서는 EBT2 필름특성에 맞게 붉은색, 초록색, 파란색 및 회색 채널에 따른 필름 교정이 가능하도록 하였다. 또한 평판형 스캐너의 빛의 산란 효과나 필름 내 방사선에 반응하는 물질(active layer)의 두께 차이가 선량 검증에 미치는 영향을 평가할 수 있도록 하였다. EBT2 필름을 이용한 측정 결과는 방사선 치료계획 시스템, ECLIPSE 또는 2차원 이온 전리함 배열의 선량 값과 비교할 수 있다. 개발한 소프트웨어를 이용한 GafChromic EBT2 필름의 선량 검증은 파일 입력, 잡음 제거, 배경 보정(background) 및 반응 물질 보정(active layer correction), 선량 계산 및 평가 단계를 통해서 이루어진다. 절대적 또는 상대적 배경 보정 방법을 선택적으로 적용할 수 있으며 필름 교정 결과 및 교정 곡선에 대한 적합식(fitting equation)은 결과 파일로 출력할 수 있다. 선량 행렬의 화소 크기 조정을 위한 보간법, 대화식 영상 이동 및 회전 기능을 이용하여 선량 행렬 간 구조적 위치를 일치시킨 후, 빔 측면도(beam profile) 및 등선량곡선(isodose curve)을 비교할 수 있다. 또한 거리 및 선량 차이에 대한 허용값을 적용하여 gamma index 및 gamma histogram을 이용한 선량 분석이 가능하다. 60도 동적 쐐기 조사면과 전립선 세기조절방사선치료의 조사면을 이용하여 개발한 소프트웨어의 기초 성능 평가를 수행하였을 때, 동적 쐐기 조사면에서 ECLIPSE와 EBT2 필름 간 절대적 빔 측면도는 3% 오차 범위 내에서 일치하였다. EBT2 필름을 이용한 두 종류의 선량 검증 모두, 99% 이상의 영역이 3 mm, 3%의 gamma index의 평가 기준을 만족하였다. 개발한 선량 검증용 소프트웨어를 이용하여 주기적으로 수행되는 일반적인 품질관리뿐만 아니라 빔의 세기가 조절된 복잡한 조사면의 품질관리에도 활용할 수 있으며, Radiochromic 필름을 이용한 선량 평가에 필요한 유용한 분석 툴을 제공할 수 있다.

HPLC-UVD/MS를 이용한 농산물 중 Cyromazine의 잔류분석법 (Determination of cyromazine residues in agricultural commodities using HPLC-UVD/MS)

  • 송이슬;김영학;이수진;황영선;권찬혁;도정아;오재호;임무혁;장우석;이영득;정명근
    • 농약과학회지
    • /
    • 제16권3호
    • /
    • pp.202-208
    • /
    • 2012
  • HPLC-UVD/MS를 이용하여 triazine계 살충제인 cyromazine의 농산물 중 잔류분석법을 확립하였다. 현미, 참외, 수박, 느타리버섯 및 배추 등 농산물 시료로부터 cyromazine을 90% methanol로 추출한 후 산성화에 의하여 이온화시킨 후 dichloromethane으로 세척함으로써 대부분의 비극성 간섭물질을 분배과정에서 제거할 수 있었다. 추출액은 최종적으로 양이온교환크로마토그래피법으로 정제하여 방해물질을 최소화하였다. 극성 화합물에 대하여 긴 머무름 특성을 나타내는 $C_{18}$ 칼럼을 선정, 이용함으로써 간섭물질과의 최적 분리조건을 확립하였다. 농산물 중 cyromazine의 정량한계(LOQ)는 0.04 mg/kg이었으며 정량한계, 정량한계의 10배 및 50배 수준으로 처리한 농산물 시료로부터의 회수율은 80.2~103.3% 범위였다. 농산물 시료의 종류 및 처리수준에 관계없이 분석오차는 6% 미만이었다. 또한 LC/MS SIM을 이용한 잔류분의 재확인법을 추가로 확립하였다. 본 연구에서 확립한 triazine계 살충제인 cyromazine의 잔류분석법은 검출한계, 회수율 및 분석오차 면에서 국제적 잔류분석기준을 만족할 뿐만 아니라 분석과정의 편이성을 고려할 때 일상적 잔류량 정량 및 검사를 위한 공정분석법으로 충분히 사용이 가능할 것으로 판단된다.

안전조치 사찰을 위한 휴대형 HPGe 검출기 시제품 성능평가 실험 (Performance Test of Portable Hand-Held HPGe Detector Prototype for Safeguard Inspection)

  • 곽성우;안길훈;박일진
    • Journal of Radiation Protection and Research
    • /
    • 제39권1호
    • /
    • pp.54-60
    • /
    • 2014
  • IAEA는 핵물질 계량 관리 검사를 위해 다양한 방사선 검출기를 사용하고 있다. 주로 HPGe, NaI(Tl), CZT 등이 사용되며, 정확한 측정이 요구되는 검사에는 고분해능 HPGe 검출기 활용도가 높다. HPGe 검출기는 추가적인 냉각장치로 인하여 부피가 크고 무거우며, 사용하기 전에 충분히 냉각시켜야 하기 때문에 측정의 준비 시간이 많이 걸린다는 단점이 있다. 이러한 문제점을 해결하기 위해 가볍고 짧은 사용 전 냉각이 요구되는 휴대형 HPGe가 개발되었다. 본 논문은 개발된 휴대형 HPGe 검출기 시제품을 실제 IAEA 사찰 현장에 적용하여 얻은 성능평가 결과를 기술한다. 휴대형 HPGe로 얻은 방사선 스펙트럼은 핵물질 종류와 농축도에 따라 다른 특징을 보였고, 또한 $^{235}U$$^{238}U$의 붕괴 계열에서 방출되는 감마선 및 우라늄의 특성 x-선 차이도 확인할 수 있었다. 그리고 휴대형 HPGe 검출기 시제품으로 측정한 농축도는 핵물질 종류에 따라 실제값과 9 ~ 27%의 상대적 오차를 보였다. 휴대형이라는 소형 검출기의 한계 때문에 일부 핵물질은 IAEA에서 요구하는 정확도를 만족시키지 못하는 경우도 있었지만 향후 추가적인 연구의 수행으로 이러한 문제점은 해결 가능할 것으로 판단된다. 본 논문은 새로운 휴대형 HPGe 검출기를 안전조치에 적용한 사례와 측정한 스펙트럼을 농축도 분석 코드로 분석한 결과를 다룬다. 따라서 국내 원자력시설의 우라늄 농축도 검증을 위한 IAEA 안전조치 사찰 결과를 분석한 논문이 별로 발표되지 않은 상황에서, 본 논문은 안전조치 검사 결과 분석에도 유익할 것으로 판단된다. 개발된 방사선 검출기의 개선 사항도 함께 논의하였으므로 향후 관련 분야 방사선 검출기 개발에도 기여할 것으로 예상된다.

공학적 기법을 응용한 카드뮴의 흡입독성 연구를 위한 초음파 네뷸라이져의 설계 그리고 광산란 광도계를 이용한 성능평가 (Design of Ultrasonic Nebulizer for Inhalation Toxicology Study of Cadmium with Application of Engineering Methodology and Performance Evaluation with Light-Scattering Photometer)

  • 정재열;도날드밀턴;김태형;이종영;정명수;고광재;김상덕;강성호;송용선;이기남
    • 동의생리병리학회지
    • /
    • 제16권3호
    • /
    • pp.464-471
    • /
    • 2002
  • Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

R&D 기술 선정을 위한 시계열 특허 분석 기반 지능형 의사결정지원시스템 (An Intelligent Decision Support System for Selecting Promising Technologies for R&D based on Time-series Patent Analysis)

  • 이충석;이석주;최병구
    • 지능정보연구
    • /
    • 제18권3호
    • /
    • pp.79-96
    • /
    • 2012
  • 기술의 발전과 융합이 빠르게 이루어지고 있는 오늘날 유망기술을 어떻게 파악하여, 다양한 후보군들 중에서 최적의 R&D 대상을 어떻게 선정할 것인가에 대한 문제는 주요한 경영의사결정문제 중 하나로 부상하고 있다. 본 연구에서는 이러한 R&D 기술 선정 의사결정을 지원할 수 있는 새로운 지능형 의사결정지원시스템을 제안한다. 본 연구의 의사결정지원시스템은 크게 3가지 모듈로 구성되는데, 우선 첫 번째 모듈인 '기술가치 평가' 모듈에서는 기업이 관심을 갖고 있는 분야의 특허들을 분석하여 유망기술 파악에 요구되는 다양한 차원의 기술가치 평가지수 값들을 산출하는 작업이 이루어진다. 이를 통해, 현재 시점에서의 각 기술의 가치가 다양한 차원에서 평가가 이루어지고 나면, 두 번째 모듈인 '미래기술가치 예측' 모듈에서 이들의 시간 흐름에 따른 변화를 학습한 인공지능 모형을 토대로 각 후보기술들이 미래 시점에 어떤 가치지수값을 갖게 될 것인지 예측값을 산출하게 된다. 마지막 세 번째 모듈인 '최적 R&D 대상기술 선정 지원' 모듈에서는 앞서 두 번째 모듈에서 산출된 각 차원별 예상 가치지수값들을 적절히 가중합하여 기술의 종합적인 미래가치 예측값을 산출하여 의사결정자에게 제공하는 기능을 수행한다. 이를 통해 의사결정자가 자사에 적합한 최적의 R&D 대상기술을 선정할 수 있도록 하였다. 본 연구에서는 제안된 시스템의 적용 가능성을 검증하기 위해, 10년치 특허데이터에 인공신경망 기법을 적용하여 실제 기술가치 예측모형을 구축해 보고, 그 효과를 살펴본다.

다중이용시설 내 식생바이오필터 시스템의 PM10, PM2.5 저감효과 및 측정방법에 대한 연구 (Study on PM10, PM2.5 Reduction Effects and Measurement Method of Vegetation Bio-Filters System in Multi-Use Facility)

  • 김태한;최부헌
    • 한국조경학회지
    • /
    • 제48권5호
    • /
    • pp.80-88
    • /
    • 2020
  • 2019년 3월 미세먼지 비상저감조치가 일주일 동안 발령되면서, 미세먼지로 인한 국민의 불안감은 점차 가중되고 있다. 본 연구는 공기정화식물이 적용된 바이오필터의 다중이용시설 내 적용성 평가를 위해 입자상 오염원의 실내 연속방출환경을 조성하여 오염원 저감효과에 대한 측정방법을 제안하고, 시스템의 실내공기질 개선 여부를 확인할 수 있는 기초연구를 진행하였다. 강의실을 대상으로 춘절기에 모니터링 1시간 전 모기향을 오염원으로 배경농도를 조성한 후, 스케줄에 따라 2시간 관수, 1시간 송풍하여 미세먼지의 저감능을 확인하였으며, 바이오필터 2m 전방에 PM10, PM2.5 및 온습도 센서를 설치하고, 3개 송풍구 중 중앙에 풍속 프로브를 설치하여 시계열 모니터링을 수행하였다. 바이오필터에 구비된 총 3개소의 송풍구 평균 면풍속은 0.38±0.16 m/s로 댐퍼 면적이 제외된 송풍구별 면적 0.29m×0.65m을 적용한 총 공조풍량이 776.89±320.16㎥/h로 산출되었다. 시스템 가동으로 평균온도 21.5~22.3℃, 평균상대습도 63.79~73.6%를 유지하여, 선행연구의 다양한 조건별 온습도 범위에 부합하는 것으로 판단된다. 시스템 공조부 구동을 통해 급격하게 상대습도를 상승시키는 효과를 효율적으로 운용할 경우, 계절에 따른 실내 미세먼지 저감과 적정한 상대습도 확보도 가능할 것으로 판단된다. 미세먼지 농도는 바이오필터 시스템 가동 전의 모든 주기에서 상승 현상이 동일하게 집계되었으며, 시스템 가동 후 1주기 송풍구간(B-1, β=-3.83, β=-2.45)에서 미세먼지(PM10)는 최대 28.8% 수준인 560.3㎍/㎥, 초미세 먼지(PM2.5)는 최대 28.0% 수준인 350.0㎍/㎥까지 저감되었다. 이후 미세먼지(PM10, PM2.5)의 농도는 2주기 송풍구간 감소(B-2, β=-5.50, β=-3.30)로 각각 최대 32.6% 수준인 647.0㎍/㎥, 32.4% 수준인 401.3㎍/㎥까지 저감되었고, 3주기 송풍구간감소(B-3, β=5.48, β=-3.51)로 최대 30.8% 수준인 732.7㎍/㎥, 31.0% 수준인 459.3㎍/㎥까지 저감된 것으로 확인되었다. 본 연구는 식생 바이오필터의 다중이용시설 내 설치와 유관한 관련 표준 및 규정을 참조하여, 객관적인 성능평가환경의 구축 방안을 제시할 수 있었다. 이를 통해 일반 강의실 환경 내에 보다 객관화된 모니터링 인프라를 조성하여, 상대적으로 신뢰성 있는 데이터 확보가 가능했던 것으로 판단된다.

유유아(乳幼兒) 및 성장기아동을 위한 영양식품 개발에 관한 연구 -(4) F-P-5, F-P-6 및 F-P-7의 영양학적, 생화학적 검토 및 그 저장성- (Development of Protein-rich Food Mixtures for Infants and Growing Children in Korea -(4) Nutritional and Biochemical Evaluation of Formulas F-P-5, F-P-6, F-P-7 and storage stability of F-P-4-)

  • 권태완;최홍식;김숙희;이현금
    • Journal of Nutrition and Health
    • /
    • 제3권3호
    • /
    • pp.129-135
    • /
    • 1970
  • 우리나라 유유아 및 성장기아동을 위한 영양식품 개발을 목표로 시작한 일련의 연구 중 시제품 F-P-4가 단일 완전식품 및 다목적 식품으로서 가장 우수하였다. 본 연구는 F-P-4 보다 영양가를 향상시키면서도 제품의 가격을 저하시킬 수 있는 가능성을 구명하기 위하여 이를 기준으로 새로이 F-P-5, F-P-6 및 F-P-7을 조제하고, 재차 화학적 성분분석, 동물사육시험, 유유아 급식시험을 실시하므로서 시제품에 대한 영양학적 생화학적 검토와 함께 그 저장성을 검토하였다. 1. F-P-5, F-P-6 및 F-P-7의 단백질 함량은 구성 원료의 배합비에 다소 변동이 있으나 F-P-4의 경우와 마찬가지로 약21%이였다. 2. 흰쥐에 급식, 7주간 사육한 결과 F-P-4, F-P-5 및 F-P-6군은 그 성장도가 서로 비슷하고 FER이 다같이 0.20이었으나, F-P-7군은 FER이 0.16으로 가장 낮고 타군에 비하여 성장도 떨어졌다. 3. F-P-4, F-P-5 및 F-P-6를 $3{\sim}12$개월 되는 유유아에게 30일간 급식한 결과 잘 먹었고 전반적으로 체온, 대변의 성상, 체중증가 등이 정상이었고 발육도 좋았다. 그리고 Hemoglobin 함량은 급식 전에는 정상치보다 다소 낮았으나, 30일 급식 후에는 0.6{\sim}2.2g%$가 증가하여 정상범위에 이르렀고, 혈청 albumin 및 총단백질량도 급식 후에는 전반적으로 증가하는 경향을 보였다. 한편 BUN도 대체로 소아표준치의 정상범위내에 있었다. 4. F-P-4를 8개월간 $25^{\circ}C,\;65{\sim}80%$의 상대습도에서 polyethlene film (0.04mm)으로 포장 저장한 결과 비타민 C와 생균수가 감소, POV, TBA value가 증가하였으며, spectral reflectance intensity, organoleptic quality에도 역시 변화가 있어서 식용할 수 있는 범위는 2개월 이내로 판정되었다. 따라서 저장성을 높이기 위한 제품 및 포장에 대한 검토가 필요하다. 5. F-P-5와 F-P-6 제품은 F-P-4에 비하여 그 영양가는 비등하되, 약 10%의 원료비의 절약이 예상된다. 원료배합 공정까지를 고려할 때 F-P-5가 가장 우수한 제품으로 밝혀졌다. 6. 식물성 혼합물인 F-P-7은 유아를 위한 단일 완전식품으로서는 불충분하나, F-P-4보다 20%나 원료비가 낮으므로 성장기 어린이를 위하여 값싼 보충식품으로 활용할만하다고 생각된다.

  • PDF

다중채널코일과 병렬영상기법 이용 시 두영역측정법을 사용한 신호대잡음비 측정의 문제점 (A study on Evaluating Validity of SNR Calculation Using a Conventional Two Region Method in MR Images Applied a Multichannel Coil and Parallel Imaging Technique)

  • 최관우;손순룡;민정환;권경태;유병규;이종석
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권4호
    • /
    • pp.403-410
    • /
    • 2015
  • 본 연구는 다중채널코일과 병렬영상기법 이용 시 관행적으로 사용하고 있는 두영역측정법을 사용한 신호대잡음비 측정의 문제점을 알아보고자 하였다. 두영역측정법 사용 시 3가지 전제 조건에 만족하는 단일채널구상코일을 이용한 기준 SNR을 산출한 후, 다중채널코일과 병렬영상기법 이용 시 공신력 있는 기관에서 권고하는 방법과 전제 조건을 고려하지 않고 사용되어 문제가 되는 두영역측정법을 사용하여 SNR을 산출한 후 비교하였다. 다중채널코일과 병렬영상기법 이용 한 두영역측정법이 가장 높은 상대표준편차를 보여 낮은 정밀도를 나타내었고, ROI 위치에 따른 SNR 차이도 매우 높아 공간적으로 잡음의 분포가 균일하지 않음을 알 수 있었다. Blend-Altman plot 통한 95% 신뢰구간 간격도 가장 넓어 기준이 되는 단일채널구상코일을 이용한 두영역측정법 대비 일치도가 낮음을 알 수 있었다. 본 연구는 동일한 영상획득조건에서 자기공명영상장치 성능평가 시험의 표준이 되는 AAPM 방법과, 신호 영역 내에서 잡음 레벨을 정확히 결정할 수 있는 NEMA 방법, 그리고 자기공명영상장치의 제조사가 권고하는 방법을 직접적으로 비교함으로써, 연구자들이 간과할 수 있는 전제조건을 만족하지 않는 다중채널코일과 병렬영상기법 이용 시, 두영역측정법을 사용한 신호대잡음비의 부정확한 문제점을 정량적으로 증명하였다는데 큰 의의가 있다.

벼 재배 품종과 환경의 상호작용 (Genotype $\times$ Environment Interaction of Rice Yield in Multi-location Trials)

  • 양창인;양세준;정영평;최해춘;신영범
    • 한국작물학회지
    • /
    • 제46권6호
    • /
    • pp.453-458
    • /
    • 2001
  • 강원도 지역에 적응성이 있는 품종을 선정하기 위해서 5개 시험지에서 11개 품종으로 1997년부터 2000년 동안에 수행된 결과를 분석하였다. 품종이 가지고 있는 유전적 특성은 환경요인과의 상호작용을 거쳐 발현되므로 장려품종을 선정하기 위하여 수행하는 다지역검정에서 이 유전자-환경간 상호작용을 평가하는 것은 품종의 환경안정성과 지역적응성을 올바르게 파악하는 데 매우 중요하다. 이를 위해서 기존에 활용되어 온 회귀분석모델로서 안정성을 분석하였고 AMMI model로서 지역별 수량성 반응의 변화양상을 토대로 유전자-환경간간의 상호작용을 해석하면서 각 시험지별 적응성 품종과 지역적 특성을 검토하였다. 1. 각 시험지에 대한 수량안정성 평가를 위한 회귀분석 결과 오봉벼, 진미벼, 신운봉벼, 운봉벼 등이 안정성이 있는 품종이었다. 2. AMMI 분석에 의한 수량성에 대한 분산분석 결과 전 변이중 품종변이가 66%, 품종-환경간 상호작용변이가 21%, 지역간 변이가 13%였다. 21%의 품종-환경간 상호작용 변이는 주성분분석을 통하여 제1주성분치(IPCAl)와 제2주성분치 (IPCA2)에 의해서 거의(92%) 해석되었다. 3. 품종들의 지역간 수량성 변화패턴은 육성모지나 시험지 등에 영향을 받았고, 5개 시험지의 수량변화 양상은 철원과 정선, 춘천과 고성이 비슷하였고 강릉은 다르게 구분되었다. 품종-환경간 상호작용 양상이 축약된 주성분분석치와 시험지별 재배기간동안의 순별 평균 기상자료와의 상관분석 결과를 기준으로 품종과 환경간의 상호작용에 관여하는 주요 기상요인은 초상최저온도, 최소상대습도, 일조시수 강수량 등이었다. 4. 비교적 환경안정성이 있는 품종으로는 오대벼, 오봉벼, 진부벼 등이었다. 철원에 적응성이 있는 품종은 진부벼, 신운봉벼, 오대벼, 오봉벼 등에었고, 춘천에는 진미벼 상주벼, 오대벼, 오봉벼가 정선, 강릉, 고성에는 진부찰벼, 삼천벼, 둔내벼 , 운봉벼, 진부올벼가 적응성이 있었다. 0.57, Fe 0.414, p 94.68, fat 3.74, protein 3.08, lactose 4.68,4. In case of processed market cow′s milk ; Ca 134.72, K 142.74, Mg 10.33, Na 45.07, Zn 0.50, Fe 0.650, p 92.48, fat 3.72, protein 3.07, lactose 4.74. According to the group of market milk(milk, fortified market row′s milk, processed market cow′s milk), the mean concentration of Ca and Fe were significantly higher in fortified and processed milk than milk(p<0.05). There were no significant differences in macronutrient(fat, protein, lactose) and mineral contents between pasteurized milk and UHT(ultra high temperature) treated milk($\alpha$=0.05). The labeled "Nutritional Facts" of market milk were satisfied with "Labeling Standards for Livestock Products of Korea". The measured mean concentrations of Ca, Fe, Zn were generally higher than lower limit of labeled value(above 80% of labeled value). The mean concentration of sodium was lower than upper limit of labeled value(below 120%

  • PDF

폭소노미 사이트를 위한 랭킹 프레임워크 설계: 시맨틱 그래프기반 접근 (A Folksonomy Ranking Framework: A Semantic Graph-based Approach)

  • 박현정;노상규
    • Asia pacific journal of information systems
    • /
    • 제21권2호
    • /
    • pp.89-116
    • /
    • 2011
  • In collaborative tagging systems such as Delicious.com and Flickr.com, users assign keywords or tags to their uploaded resources, such as bookmarks and pictures, for their future use or sharing purposes. The collection of resources and tags generated by a user is called a personomy, and the collection of all personomies constitutes the folksonomy. The most significant need of the folksonomy users Is to efficiently find useful resources or experts on specific topics. An excellent ranking algorithm would assign higher ranking to more useful resources or experts. What resources are considered useful In a folksonomic system? Does a standard superior to frequency or freshness exist? The resource recommended by more users with mere expertise should be worthy of attention. This ranking paradigm can be implemented through a graph-based ranking algorithm. Two well-known representatives of such a paradigm are Page Rank by Google and HITS(Hypertext Induced Topic Selection) by Kleinberg. Both Page Rank and HITS assign a higher evaluation score to pages linked to more higher-scored pages. HITS differs from PageRank in that it utilizes two kinds of scores: authority and hub scores. The ranking objects of these pages are limited to Web pages, whereas the ranking objects of a folksonomic system are somewhat heterogeneous(i.e., users, resources, and tags). Therefore, uniform application of the voting notion of PageRank and HITS based on the links to a folksonomy would be unreasonable, In a folksonomic system, each link corresponding to a property can have an opposite direction, depending on whether the property is an active or a passive voice. The current research stems from the Idea that a graph-based ranking algorithm could be applied to the folksonomic system using the concept of mutual Interactions between entitles, rather than the voting notion of PageRank or HITS. The concept of mutual interactions, proposed for ranking the Semantic Web resources, enables the calculation of importance scores of various resources unaffected by link directions. The weights of a property representing the mutual interaction between classes are assigned depending on the relative significance of the property to the resource importance of each class. This class-oriented approach is based on the fact that, in the Semantic Web, there are many heterogeneous classes; thus, applying a different appraisal standard for each class is more reasonable. This is similar to the evaluation method of humans, where different items are assigned specific weights, which are then summed up to determine the weighted average. We can check for missing properties more easily with this approach than with other predicate-oriented approaches. A user of a tagging system usually assigns more than one tags to the same resource, and there can be more than one tags with the same subjectivity and objectivity. In the case that many users assign similar tags to the same resource, grading the users differently depending on the assignment order becomes necessary. This idea comes from the studies in psychology wherein expertise involves the ability to select the most relevant information for achieving a goal. An expert should be someone who not only has a large collection of documents annotated with a particular tag, but also tends to add documents of high quality to his/her collections. Such documents are identified by the number, as well as the expertise, of users who have the same documents in their collections. In other words, there is a relationship of mutual reinforcement between the expertise of a user and the quality of a document. In addition, there is a need to rank entities related more closely to a certain entity. Considering the property of social media that ensures the popularity of a topic is temporary, recent data should have more weight than old data. We propose a comprehensive folksonomy ranking framework in which all these considerations are dealt with and that can be easily customized to each folksonomy site for ranking purposes. To examine the validity of our ranking algorithm and show the mechanism of adjusting property, time, and expertise weights, we first use a dataset designed for analyzing the effect of each ranking factor independently. We then show the ranking results of a real folksonomy site, with the ranking factors combined. Because the ground truth of a given dataset is not known when it comes to ranking, we inject simulated data whose ranking results can be predicted into the real dataset and compare the ranking results of our algorithm with that of a previous HITS-based algorithm. Our semantic ranking algorithm based on the concept of mutual interaction seems to be preferable to the HITS-based algorithm as a flexible folksonomy ranking framework. Some concrete points of difference are as follows. First, with the time concept applied to the property weights, our algorithm shows superior performance in lowering the scores of older data and raising the scores of newer data. Second, applying the time concept to the expertise weights, as well as to the property weights, our algorithm controls the conflicting influence of expertise weights and enhances overall consistency of time-valued ranking. The expertise weights of the previous study can act as an obstacle to the time-valued ranking because the number of followers increases as time goes on. Third, many new properties and classes can be included in our framework. The previous HITS-based algorithm, based on the voting notion, loses ground in the situation where the domain consists of more than two classes, or where other important properties, such as "sent through twitter" or "registered as a friend," are added to the domain. Forth, there is a big difference in the calculation time and memory use between the two kinds of algorithms. While the matrix multiplication of two matrices, has to be executed twice for the previous HITS-based algorithm, this is unnecessary with our algorithm. In our ranking framework, various folksonomy ranking policies can be expressed with the ranking factors combined and our approach can work, even if the folksonomy site is not implemented with Semantic Web languages. Above all, the time weight proposed in this paper will be applicable to various domains, including social media, where time value is considered important.