• 한국방사선학회논문지
• /
• 제5권5호
• /
• pp.283-287
• /
• 2011

본 연구는 고해상도 디지털 X선 영상 검출기 적용을 위해 미세 $Gd_2O_2S$:Tb 형광체 분말을 저온 액상법을 이용하여 합성하였다. 제조된 형광체 분말을 이용하여 입자침전법을 이용하여 형광체 필름을 제작하여 발광특성을 조사하였다. 측정결과, Tb 첨가농도에 따른 상대적인 발광량 측정결과 5 wt%의 첨가농도에서 가장 높은 발광효율을 보였으며, 첨가농도가 증가할수록 소광현상에 의한 발광강도가 급격히 감소하는 경향을 보였다. 또한 270 ${\mu}m$ 두께의 $Gd_2O_2S$:Tb에서 2945 pC/$cm^2$/mR의 발광 강도를 가졌으며, 발광 강도가 거의 포화되는 것을 관찰할 수 있었다. 끝으로 제조된 형광체의 영상획득 성능을 평가하기 위해 상용화된 CMOS 센서를 이용하여 X선 영상을 획득하여 MTF, NPS를 측정하여 DQE 평가를 수행하였다. 측정결과, DQE(0)의 값은 37%로 다소 낮은 값을 보였다. 향후 필름 제조 공정상의 문제점을 해결한다면, DQE를 개선할 수 있을 것으며, 고해상도 의료 방사선 영상 시스템 적용에 유용하게 적용 가능할 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권2호
• /
• pp.24-33
• /
• 2017

국내 도시철도 지하역사는 주로 개착식 공법으로 건설되었으며, 1970~80년대에 건설된 지하역사는 내진설계가 반영되지 않았다. 한반도 뿐 만 아니라, 전 세계적으로 지진 발생빈도는 증가하고 있는 추세이며, 내진설계가 적용되지 않은 기존 지하역사에 지진이 발생될 경우 막대한 인명 및 재산피해가 우려된다. 본 연구에서는 내진보강이 된 지하역사의 지반-구조물 상호작용과 보강효과를 검토하기 위해, Kobe 지진파 및 Northridge 지진파를 1/60축소모형에 적용하여 원심모형실험을 수행하였다. 내진보강은 주 부재인 기둥, 측벽, 슬래브의 강성을 증가시켜 내진보강 전후를 비교 검토하였다. 현장 조건에 따른 모형 지반을 모사하기 위해 공진주시험을 통해 실제 깊이 및 밀도에 따른 전단파 속도의 변화를 모사하였다. 지반과 구조물은 비교적으로 유사한 거동을 하였으며, 지표면으로 가까워질수록 상대변위가 증가하였다. 또한, 내진 보강전후의 지하역사 구조물의 슬래브에 비해 기둥과 측벽에서 상대변위와 모멘트 구조 거동을 통해 내진 보강 효과를 확인할 수 있었으며, 단주기인 Northridge지진파에 비해 Kobe지진파에서 구조물의 변형이 크게 발생하는 것을 통해 지진파는 주요 설계인자임을 확인할 수 있었다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.197-207
• /
• 2007

It has been reported that Back-Tension played a significant role in archery (Lee & Bondit, 2005; Kim, 2007) but there are a few researches related Back-Tension in Korea recently. Therefore, the purpose of this study was to investigate archery back tension technique for the second ranked archer in the World and to find ways to improve performance. A subject(height: 185cm, mass: 82kg, years: 21yrs, careers: 12yrs) who is a number of national team and the second ranked archer in the World authorized by FITA (Federation Internationale de Trial Arc) was perticipated in this experiment. When shooting 60 shots($12{\times}5$), shooting motions were recorded with 7 infrared cameras and 2 ultrahigh-speed cameras. A QTM and an Auto Track were used to acquire raw data. The sampling rates of both cameras were 200 Hz. and 1000 Hz. respectively and data were filtered using a fourth order Butterworth low pass filtering with a cutoff-frequency of 30Hz. The parameters were calculated with Matlab6.5 and analyzed with SPSS11.0. After Pearson's correlations between 8 parameters were analyzed, 5 parameters from 13parameters that affected records were analyzed with multiple regression analysis (Enter order: x1, x2, x3, x4, x5). The results were as follows: 1. Comparing between parameters according to scores, the patterns of horizontal and vertical angular velocity(av.) of scapular relative angle was different between 8 score and 9 or 10 scores. 2. The correlations of parameters that affected records were a horizontal av.(x1, p=.032<.05) and a vertical av.(x3, p=.033<.05) of scapular from release to delivery in KB back-tension (anchoring-delivery). 3. The decision coefficients(R2) of above two parameters and three parameters selected by experts that may affect record, that is, an absolute trunk angle(x4) from in KKC back-tension (anchoring-release) and a horizontal relative scapular angle(x2) and an absolute trunk angle(x5) from release to delivery in KB back-tension were 7.7%(x1), 0.1%(x2), 8.5%(x3), 0.7%(x4) and 0.9%(x5) in sequence. 4. The multiple regression equation was a y= -1.16E-2 x1 + 0.109 x2 + 3.437E-2 x3 + 6.139E-2 x4 + 0.117 x5 + 3.420 In conclusion, a total contribution was low, that is, R2(17.9%) suggested that on the one hand, Lim's motion may not depend on a certain factor because his postural factors affected shooting motion are some stable on the other hand, unknown factors may exist(e.g. psychological, physiological factors etc.). Further study of EMG patterns of muscles and anatomic consideration related to shoulder girdle and scapular bones may help to identify mechanism of Back-Tension.

• 한국수자원학회논문집
• /
• 제39권3호
• /
• pp.261-274
• /
• 2006

본 연구에서는 소양강 유역을 대상으로 중장기 확률론적 댐 유입량 예측을 위해 30년 동안의 일단위 장기유출 해석을 수행하였다. 유출모형의 입력자료를 구축하기 위해 Anderson의 융설모형으로 적설에 대한 융설량을 계산하였고, Penman의 혼합기법으로 잠재증발량을 산정하였다. 또한, 기존 TOPMODEL의 적용 유역면적의 제약성을 극복하기 위해 대상유역을 적정 소유역으로 구분하고 운동파 하도홍수 추적기법을 통해 대유역 유출량을 계산할 수 있는 준분포형 TOPMODEL을 활용하였으며, 강수, 융설 및 잠재증발량을 유출모형에 입력하여 장기유출 해석을 수행하였다. 융설량 및 잠재증발량 계산결과는 관측자료의 부재로 그 정량적 평가는 수행할 수 없었지만 최대 적설깊이와 소형접시 증발량 자료와 같은 간접적 자료와의 시간적 변동성은 매우 잘 일치하였다. 이렇게 구축된 입력자료를 바탕으로 저수(1979년), 중수(1999년), 고수(1990년) 유출사상에 대한 모형의 최적 매개변수를 산정하고 준분포형 TOPMODEL의 일단위 장기유출 모의능력을 검토한 결과 계산유량과 관측유량 사이의 유출용적 상대오차가 5.64%, 상관계수가 0.91로 계산되어 비교적 정확한 유출결과를 제시하였고, 융설고려 유무에 따라 3, 4월의 유출용적 상대오차가 17% 및 4%로 감소함으로써 장기유출 계산시 모형의 정확도 향상을 위해 융설모형의 적용이 매우 필요한 것으로 나타났다.

• 한국의료질향상학회지
• /
• 제30권1호
• /
• pp.33-43
• /
• 2024

Purpose:The acute hospital accreditation program launched in South Korea has shown positive effects on safety culture and quality of care. However, relative weights have not yet been investigated for accreditation criteria with a hierarchical structure. This study aimed to derive the relative weights of acute-care hospital accreditation criteria. Methods: We conducted an online survey using the analytic hierarchy process (AHP) technique to assess the validity, importance, and urgency of acute hospital accreditation criteria. The AHP online survey link was distributed in November 2022 after obtaining informed consent from 10 experts in hospital accreditation. Results: 'Basic value system' ranked highest, while 'patient care system' ranked second in terms of validity, importance, and urgency. 'Performance management system' had the lowest validity and urgency, while 'organizational management system' carried the lowest importance. Within the 'patient care system' domain, 'surgery and anesthesia sedation management' scored highest in validity and importance, and 'patient care' scored highest in urgency. 'Care delivery system and evaluation' received the lowest scores for all three aspects. In the 'organizational management system' domain, infection control ranked highest in terms of validity, importance, and urgency. The lowest validity was observed for 'management and organizational operation' and the lowest importance and urgency were noted for 'human resource management'. Conclusion: The weights for validity, importance, and urgency, as shown in each domain and chapter, and the number of measurable elements included, are largely inconsistent. This study will contribute to the development of the structure and scientific improvement of accreditation standards.

• Journal of Animal Science and Technology
• /
• 제62권5호
• /
• pp.730-740
• /
• 2020

This feeding trial was conducted to investigate the effects of Mentha arvensis (MA) and Geranium thunbergii (GT) in drinking water on physicochemical attributes, sensory qualities, proximate analysis and oxidative stability of broiler leg meat. One hundred and twenty broiler chicks were assigned to 1 of 4 dietary treatments for 5 weeks. The dietary treatments were 1) control, 2) T1 (0.1% 1 MA:1 GT), 3) T2 (0.1% 1 MA:4 GT), 4) T3 (0.1% 4 MA: 1 GT). The water holding capacity and cooking loss were improved (p < 0.05) in T2 and T3. The flavor, texture and acceptability of leg meat by consumers were significantly increased in T2 relative to the control (p < 0.05). The crude protein content was increased in T3 while the crude fat decreased in T2 (p < 0.05). Moreover, broilers supplemented with plant extracts had the lowest leg meat TBARS (thiobarbituric acid reactive substances) values after 2 weeks of storage as compared with the control. Total phenolic contents and 1-1-diphenyl 2 picrylhydrazyl (DPPH) activity were also better in the T2 group (p < 0.05) compared with the control, whereas 2,2-Azinobis-3 ethytlbenzothiazoline-6-sulfonic acid (ABTS⁺) remained unaffected. Overall, these results demonstrate that broiler drinking water with the inclusion of plant extract combination can be used to enhance the oxidative stability, shelf life and quality characteristics of broiler leg meat without compromising the growth performance.

• 항공우주시스템공학회지
• /
• 제11권3호
• /
• pp.31-38
• /
• 2017

항공 산업의 소비 수요가 증가함에 따라 국내에서 수행할 수 있는 인증체계 및 비행시험 운영에 필요한 연구가 요구된다. 이에 따라 본 논문에서는 국내 민항기 KC-100, 군용기 T-50 사례와 국외 FAA(Federal Aviation Administration), CAAC(Civil Aviation Administration of China) 기관의 비행시험 관련 문건을 바탕으로 개발 및 개조 중에 있는 항공기에 대한 성능검증, 시험평가 및 안전성 인증을 위한 비행시험 운영 절차와 안전 관리 프로그램 개발 연구를 수행하였다. 또한 항공기 비행시험 절차에 적용할 수 있는 FTSC(Flight Test Safety Committee)의 모범사례(Best Practices)를 조사 분석하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4968-4986
• /
• 2017

In this paper, we primarily address the difficulty of automatic generation of a plausible depth map from a single image in an unstructured environment. The aim is to extrapolate a depth map with a more correct, rich, and distinct depth order, which is both quantitatively accurate as well as visually pleasing. Our technique, which is fundamentally based on a preexisting DepthTransfer algorithm, transfers depth information at the level of superpixels. This occurs within a framework that replaces a pixel basis with one of instance-based learning. A vital superpixels feature enhancing matching precision is posterior incorporation of predictive semantic labels into the depth extraction procedure. Finally, a modified Cross Bilateral Filter is leveraged to augment the final depth field. For training and evaluation, experiments were conducted using the Make3D Range Image Dataset and vividly demonstrate that this depth estimation method outperforms state-of-the-art methods for the correlation coefficient metric, mean log10 error and root mean squared error, and achieves comparable performance for the average relative error metric in both efficacy and computational efficiency. This approach can be utilized to automatically convert 2D images into stereo for 3D visualization, producing anaglyph images that are visually superior in realism and simultaneously more immersive.

• 한국농공학회논문집
• /
• 제58권4호
• /
• pp.9-19
• /
• 2016

The objective of this study was to evaluate the applicability of SWAT (Soil and Water Assessment Tool) model for runoff estimation in the Nam river dam watershed. Input data for the SWAT model were established using spatial data (land use, soil, digital elevation map) and weather data. The SWAT model was calibrated and validated using observed runoff data from 2003 to 2014 for three stations (Sancheong, Shinan, Changchon) within the study watershed. The $R^2$ (Determination Coefficient), RMSE (Root Mean Square Error), NSE (Nash-Sutcliffe efficiency coefficient), and RMAE (Relative Mean Absolute Error) were used to evaluate the model performance. Parameters for runoff calibration were selected based on user's manual and references and trial and error method was applied for parameter calibration. Calibration results showed that annual mean runoff were within ${\pm}5%$ error compared to observed. $R^2$ were ranged 0.64 ~ 0.75, RMSE were 2.51 ~ 4.97 mm/day, NSE were 0.48 ~ 0.65, and RMAE were 0.34 ~ 0.63 mm/day for daily runoff, respectively. The runoff comparison for three stations showed that annual runoff was higher in Changchon especially summer and winter seasons. The flow exceedance graph showed that Sancheong and Shinan stations were similar while Changchon was higher in entire fraction.

• 한국대기환경학회지
• /
• 제25권3호
• /
• pp.179-187
• /
• 2009

This paper describes the field evaluation of a sampling and analytical method for the quantity of airborne hexavalent chromium ($Cr^{6+}$) in the industrial areas, such as Sihwa and Banwol. Ambient measurements were performed by using the cellulose filter during the four seasons (October 2006 to June 2007). The determination of hexavalent chromium was carried out by ion chromatography. Performance validations, including method detection limit, relative standard deviation, and recovery percent, were also investigated. The mean concentrations of $Cr^{6+}$ in Sihwa and Banwol were 0.767 and 0.796 $ng/m^3$, respectively, which are similar to those of other foreign industrial areas. The seasonal variations of $Cr^{6+}$ levels were not quite different, which implies that the chromium was continuously emitted from the industrial sources throughout the year. The concentration variations between total chromium and $Cr^{6+}$ have also shown the similar pattern, suggesting that these components originate from the same sources. The concentration of $Cr^{6+}$ was found to be 0.7 to 2.4% of the total chromium. From these results, the approach using the cellulose filter may be suitable to collect $Cr^{6+}$ in the ambient air.