• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.113-119
• /
• 2003

The thermal properties and crystallization behaviors of poly(ethylene terephthalate) (PET) were investigated by controlling the annealing conditions of PET sample, such as relative humidity, temperature, and time. The variations of moisture content, glass transition temperature ($T_g$) and cold crystallization temperature ($T_{\propto}$) were examined after annealing the PET sample. Subsequently crystallization process was performed with the annealed PET specimen, and then the degree of crystallinity and heat distortion temperature (HDT) of variously crystallized PET specimen were examined. Residual stress relaxation in the injection molded PET sample after annealing was also observed through polarized films. Moisture content in the PET specimen increased up to 6000 ppm with increasing the relative humidity, temperature, and time of annealing. $T_g$ and $T_{\propto}$ of the annealed PET specimen decreased with increasing moisture content. The degree of crystallinity increased as increasing moisture content in the PET specimen. However for same moisture content, the degree of crystallinity varied with annealing conditions. The relaxations of residual stress in the PET sample differed from annealing conditions, and the maximum degree of crystallinity increased with decreasing residual stress in the PET sample.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.226.2-227
• /
• 2003

The degree of milling is an important factor in terms of the nutritional value and the economic return of the milled rice. This study was to investigate the changes in compositions of the oils obtained from rice with different degree of milling. The content of total tocols in rice significantly (p＜0.05) decreased, as degree of milling increased. The relative ％ of -tocopherol in brown rice had lower than those in milled rices whereas the relative ％ of -tocotrienol, and -tocotrienol in brown rice higher than those in milled rices. -Oryzanol content significantly (P<0.05) decreased from 198.5 mg/kg rice for brown rice (0% milling) to 65.5 125.0 mg/kg rice for rice samples with 5.6, 8.0, and 9.6 ％ milling. -Sitosterol was most abundant sterol representing 50 ％ - 56% of the total sterol content in all analyzed samples. The content of total sterol as well as each sterol isomers in rice significantly (P<0.05) decreased, as degree of milling increased. A similar trend was observed in changes of octacosanol and squalene.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.169-174
• /
• 2003

Design of a rational earth volume conversion coefficient is required as the earth volume conversion coefficient may give great influence on construction work volume and construction costs in the civil engineering works where large-scaled earth volume is excavated. However, there are a great deal of difficulties in the calculation of the exact spoil surface earth and Insufficient earth volume by adopting the figures presented on the generally used design specifications which are not the results obtained from the selection tests in calculating the earth volume conversion coefficient. In this connection, it would be desirable to calculate the earth volume conversion coefficient by carrying out large-scaled site test adequate for the relevant environment. In consequence, this study aims at calculating the exact earth volume conversion coefficient of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative exactness degree of the crossing was calculated at 0.5% in average. The relative exactness degree of 0.5% in the volume may be judged as an exact measurement as it corresponds to 0.17% of the relative exactness degree in the length measurement. We have calculated the exact earth volume conversion coefficient by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with the earth volume conversion coefficient determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of earth volume conversion coefficient, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.413-422
• /
• 2004

Established microleakage tests have their own disadvantages. In this study, 3D reconstruction method was tried to overcome these disadvantages. Four types of microleakage tests were used and relationships among them were estimated: penetrated dye volume: marginal adaptability: degree of dye penetration and relative penetrated length to cavity wall. Twenty-four Class V cavities were bulk filled with composite (Esthet X) following surface treatments: N group (no treatment): E group (etching only): T group (etching + Prime & Bond NT). 50% silver nitrate was used as a dye solution after thermocycling ($5^{\circ}C{\;}&{\;}55^{\circ}C$, 1.000 times). Teeth were serially ground with a thickness of 0.2 mm. Volume of dye penetration was estimated from a three-dimensionally reconstructed image with a software (3D-DOCTOR). Percentage of margin without gap was estimated from SEM and degree of dye penetration and the relative length of dye penetration to overall cavity wall were also estimated. ANOVA and Scheffe test for dye volume, Kruskal-Wallis and Mann-Whitney test for marginal quality, Spearman's rho test for checking of relationships among methods were used. The results were as follows: 1. Dye penetration could be seen from several directions, furthermore, its volumetric estimation was possible. 2. Reverse relationship was found between dye volume and marginal quality (r = -0.881/ p = 0.004). 3. Very low relationship was seen between dye volume and two-dimensional tests (degree of dye penetration and relative length). However, 2D evaluation methods showed high relationship (p = 0.002-0.054) each other. 4. Three times vertical section could be recommended as a 2D test.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.10
• /
• pp.1153-1158
• /
• 1999

β-Cyclodextrin, amylose, and cellulose were partially methylated and acetylated in order to examine the relative reactivities of 2-, 3-, and 6-OH groups to alkylation and acylation. The partially methylated samples of the polysaccharides were treated with excess of ethyl iodide and sodium hydroxide in dimethyl sulfoxide to convert all of the free hydroxyl groups to ethyl ether groups. The partially O-ethylated and O-methylated polysaccharides were reductively cleaved with triethylsilane in the presence of trimethylsilyl methanesulfonate and borontrifluoride etherate (5 : 1 by mole) and the resulting 4-OH group was acetylated and benzoylated to form mixtures of eight 4-O-acyl-1,5-anhydroalditols. The relative ratio of the alditol esters were analyzed by gas chromatography to determine the degree of substitution at each position. A similar sequence of reactions was carried out with partially acetylated polysaccharides. The results indicated that the order of relative reactivities for methylation are 2-OH > 6-OH > 3-OH and for acylation are 6-OH > 2-OH > 3-OH regardless of the anomeric configuration.

• Toxicological Research
• /
• v.7 no.1
• /
• pp.83-92
• /
• 1991

Complexities of testis structure and function are emphasized in morphometrical and genotoxic evaluation by statistical analysis. F-344 rats were treated with azinphos methyl, cyclophosphomide, and dichlorvos. And Brdu was injected with intrapertionially before sacrifice. The existence and degree of DNA damage were measured by Brdu labeling index which represented relative amount of Brdu incorporated in DNA, morphometric change was evaluated by the relative length of tubular diameter in circular seminiferous tubules and the number of spermatogonia per Sertoli cell in stage IX seminiferous tubules.

• Journal of the Korean Mathematical Society
• /
• v.45 no.6
• /
• pp.1635-1646
• /
• 2008

Schanuel's formula describes the distribution of rational points on projective space. In this paper we will extend it to algebraic points of bounded degree in the case of ${\mathbb{P}}^1$. The estimate formula will also give an explicit error term which is quite small relative to the leading term. It will also lead to a quasi-asymptotic formula for the number of points of bounded degree on ${\mathbb{P}}^1$ according as the height bound goes to $\infty$.

• Journal of Korean Institute of Industrial Engineers
• /
• v.1 no.2
• /
• pp.65-72
• /
• 1975

A System of evaluation is developed which determines a uniform and individualized monetary redress. It can be applied not only to permanent disability but to temporary disability cases and considers all factors affecting monetary redress in determining process. As objects of compensation this model considers five factors, the degree of injury, the change of earning capacity, medical fee, job suspension and the degree of contributory negligence. For each object is defined a subfunction measuring its magnitude. Then by assigning reasonable weighted values to these five subfunctions according to their relative importance, we get main function which determines appropriate monetary redress.

• Journal of Mechanical Science and Technology
• /
• v.18 no.1
• /
• pp.132-144
• /
• 2004

This paper presents a new method driving multiple robots to their goal position without collision. To consider the movement of the robots in a work area, we adopt the concept of avoidability measure. The avoidability measure figures the degree of how easily a robot can avoid other robots considering the velocity of the robots. To implement the concept to avoid collision among multiple robots, relative distance between the robots is proposed. The relative distance is a virtual distance between robots indicating the threat of collision between the robots. Based on the relative distance, the method calculates repulsive force against a robot from the other robots. Also, attractive force toward the goal position is calculated in terms of the relative distance. These repulsive force and attractive force are added to form the driving force for robot motion. The proposed method is simulated for several cases. The results show that the proposed method steers robots to open space anticipating the approach of other robots. In contrast, since the usual potential field method initiates avoidance motion later than the proposed method, it sometimes fails preventing collision or causes hasty motion to avoid other robots. The proposed method works as a local collision-free motion coordination method in conjunction with higher level of task planning and path planning method for multiple robots to do a collaborative job.

• The Journal of Korean Physical Therapy
• /
• v.13 no.2
• /
• pp.445-452
• /
• 2001

The purpose of this study to compare the muscle performances (peak torque (PT), relative strength (RS), average power (AP), and total work (TW)) between taping group and non-taping group after 1 hour extensive exercise. Twenty healthy male subjects were evaluated in this study. Each subject was divided with taping(n=10) and non-taping group (n=10) randomly. Muscle performances were measured at 60 degree/sec and 180 degree/sec on the Cybex 770. The PT, RS, AP, and TW were measured before and after 1 hour extensive exercise. The results showed that taping group demonstrated significantly higher PT, RS, AP, and TW during ankle dorsiflexion and plantar flexion at 60 degree/sec than those of non-taping group, except for total work during ankle plantar flexion. At the 180 degree/sec, PT and RS was significantly higher during ankle dorsiflexion and plantar flexion in taping group than in non-taping group. This results suggest that lower leg taping could be useful to maintain muscle performances during sport activities.