• Journal of Aquaculture
• /
• v.12 no.4
• /
• pp.255-266
• /
• 1999

The early development, growth, and morphological changes of Tiger puffer Takifugu rubripes are described on the basis of a seres of a series of reared specimens. Detailed o수 the early developmental stages are illusrtated withe special reference to morphological transformation. Egg and sperm of puffer fish Takifugu rubripes were obtained from mature adults under natural conditions, ferilized artificially and incubated in the laboratory. The incubation period of fertilizd eggs was 160 to 180 hours at a temperature of $15.1~ 18.0^{\circ}C$. Larvae were fed successively with rotifer, Artemia nauplii and artificial food for 90 days. The mean total length of newly-hatched larvae was about 2.8mm. Mouth opening occurred on the 1- day yolk-sac larvae and initial feeding was observed on th 4-5 days after hatching . The morphological transitions from the larvae to juvenile and juvenile and juvenile to young stages occurred when fish reached about 10mm in total length(about 30 days after hatching) and about 32mm in total length(about 60days after hatching) , respectively. The coefficient of variation in total length distribution increased with growth. Following the appearance of its peak at the size of about 18mm in total length, the coefficient value declined. Many changes in proportion of the body parts to total length were observed at about 9~10mm and 30~33mm in total length, corresponding to the transformations from larvae to juvenile and from juvenile to young, respectively. Also one big morphological change was observed at about 18mm in total length that divide the juvenile stage into two sub-stages.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.99-105
• /
• 1983

In the Steering and Sailing Rules of International Regulations for Preventing Collicions at Sea, 1972, any relative distance between two vessels necessary for taking action to avoid collision in head-on situation is not referred. In this paper, the author analyzed the ship's collision avoiding actions from a viewpoint of ship motions and worked out mathematical formulas to calculate the relative distances necessary for collision avoiding actions. Figuring out the values of maneuvering indices through experiments of actual ships, the author applied these values to the calculationg formulas and calculated the minimum safe relative distances. On the assumption that two vessels same in size and condition are approaching each other in head-on situation, the minimum safe relative distance was calculated as 5.0 times, sufficient safe relative one as 10.0 times their own length.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.676-684
• /
• 2020

This study was carried out in order to evaluate the bending creep deflection of glulams and bolted glulams beam-to-beam connection with steel-gusset plates and bolts under changing relative humidity. The two types of glulam beams (130 mm in width, 175 mm in thickness, and 3000 mm in length) used in this study were made from domestic larch and composed of seven layers. The gussets were made of 8-mm-thick steel plates. Creep testing was conducted under constant loads in an uncontrolled environment. The test was carried out in a room that was well ventilated through a window. The creep test specimens were loaded for 33,000 hours. A bending creep test for the glulams was conducted through four-point loading. The applied stresses were 20% and 30% of the MOR in the static bending test for the glulam and bolted glulam, respectively. After 33,000 hours, the creep deflection of the glulam at a 20% stress level increased by 39% to 99%, while the creep deflection of the glulam at a 30% stress level increased by 27% to 67%, as compared with instantaneous elastic deflection. The relative creep increased during autumn and winter, and recovered during spring and summer. The relative creep of the bolted glulams was changed abruptly by loading up to 5,000 hours, but stabilized after 5,000 hours, and then gradually increased until 33,000 hours. The relative creep of the bolted glulam increased 2.11 times on average after 33,000 hours.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.263-266
• /
• 2018

This study was investigated the growth characteristics of 'Nongjingo' cultivar(Lentinula edodes) according to relative humidity(RH). The color difference of the pileus showed the highest L(Lightness, L) value in RH65 and the a(Redness, a) value in RH95. b(Yellowness, b) values were similar in all treatments. The hardness of pileus is highest at RH95. As the relative humidity increased, the length of pileus and stipe tended to increase. The diameter and thickness of pileus were high at RH95%. The diameter of stipe could not see the big difference in the three treatment groups. This study growth characteristics and yield were increased at higher relative humidity, but quality was decreased. Therefore, must adjust the relative humidity to produce high quality mushrooms.

• Korean Journal of Environmental Biology
• /
• v.35 no.1
• /
• pp.64-82
• /
• 2017

Two species of the minuta-subgroup within the oncaeid copepod genus Triconia $B{\ddot{o}}ttger$-Schnack, 1999 collected in the equatorial Pacific Ocean are newly recorded. A female T. minuta (Giesbrecht, 1893 ["1892"]) and both male and female T. umerus ($B{\ddot{o}}ttger$-Schnack and Boxshall, 1990) from the northeast equatorial Pacific are redescribed with the comparison of its morphological details, which differs from previous studies, in terms of the larger body size, the length to width ratio of the genital double-somite, the relative length of the outer basal seta on P5, and the ornamentation of the appendages. The characters, which are used for identification, such as the length ratio of the outer subdistal and outer spine versus the distal spine on P3-P4, and the outer spine length of the middle exopodal segment on P3 and P4 are reported for the first time. Information on the variations in the endopodal spine lengths of swimming legs 2-4 is also provided for T. minuta and T. umerus, with the summary of the wide zoogeographical distribution of these two species.

• Journal of Industrial Technology
• /
• v.13
• /
• pp.81-87
• /
• 1993

Two dimensional analysis on the triangular fin for both the insulated fin tip and non-insulated fin tip and one dimensional analysis on that when the temperature of the fin tip is finite are made. The effect of the fin tip is shown by comparing the heat loss from the fin and the temperature along the fin length varing the non-dimensional fin length and Biot number for each three cases. The results are following. When the non-dimensional fin length is very short, the relative error of the heat loss from the fin with insulated fin tip to that from the fin with non-insulated fin tip is very high. The value of the temperature variation along the non-dimensional fin length is minimum for the finite fin tip temperature using one dimensional analysis and is maximum for the insulated fin tip using two dimensional anaysis.

• Proceedings of the KSPS conference
• /
• 2000.07a
• /
• pp.364-364
• /
• 2000

It has been widely discussed in phonology that syllable structure of mother tongue influences one's acquisition of foreign language. However, the topic was hardly examined experimentally. So, we investigated effects of Korean syllable structure when Korean speakers pronounce English words, especially focusing on consonant strings that are not allowed in Korean. In the experiment, all the subjects are divided into 3 groups, that is, native, experienced, and inexperienced speakers. Native group consists of 1 male English native speaker. Experienced and inexperienced are each composed of 3 male Korean speakers. These 2 groups are divided by the length of residence in the country using English as a native language. 41 mono-syllable words are prepared considering the position (onset vs. coda), characteristic (stops, affricates, fricatives), and number of consonant. Then, the length of the consonant cluster is measured. To eliminate tempo effect, the measured length is normalized using the length of the word 'say' in the carrier sentence. Measurement of consonant cluster is the relative time period between the initiation of energy (onset I coda) which is acoustically representative of noise (consonant portion) and voicing. bar (vowel portion) in a syllable. Statistical method is used to estimate the differences among 3 groups. For each word, analysis of variance (ANDY A) and Post Hoc tests are carried out.

• Journal of Welding and Joining
• /
• v.16 no.2
• /
• pp.84-92
• /
• 1998

On this study, the variations of hardness and microstructure were observed at he spot-welded part of 5182 alminum alloy sheets with thickness of 1.2 mm. The hardness of spot-welded part of aluminum alloy indicated the lowest value at nugget center. Also, the position where fatigue crack exists was investigated by surveying microstructure of the spot-welded sections. Mean load-deformation diagrams were obtained from static tensile test. Fracture was occurred completely within 5 mm after transforming elastic into plastic area. Fatigue test was stopped when the specimens of fatigue test had the final displacement of 0.2mm and measured fatigue bending angle and crack length. This study utilized them, investigated the relations between fatigue bending angle and fatigue crack length and made a estimation of the fatigue fracture life of resistance spot welded part of 5182 aluminum alloy sheet. The relative equation o fatigue crack length and fatigue failure life can be represented by {TEX}$L_{C}${/TEX}=α{TEX}$N_{f}^ {β}${/TEX}.

• Computers and Concrete
• /
• v.26 no.6
• /
• pp.515-531
• /
• 2020

Due to the construction difficulties of steel reinforced concrete (SRC), a new composite structure of steel and steel fiber reinforced concrete (SSFRC) is proposed for solving construction problems of SRC. This paper aims to investigate the bond properties and composition of interfacial bond stress between steel and steel fiber reinforced concrete. Considering the design parameters of section type, steel fiber ratio, interface embedded length and concrete cover thickness, a total of 36 specimens were fabricated. The bond properties of specimens were studied, and three different methods of calculating interfacial bond stress were analyzed. The results show: relative slip first occurs at the free end; Bearing capacity of specimens increases with the increase of interface embedded length. While the larger interface embedded length is, the smaller the average bond strength is. The average bond strength increases with the increase of concrete cover thickness and steel fiber ratio. And calculation method 3 proposed in this paper can not only reasonably explain the hardening stage after the loading end curve yielding, but also can be applied to steel reinforced high-strength concrete (SRHC) and steel reinforced recycled coarse aggregate concrete (SRRAC).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.12-18
• /
• 2005

This study was carried out to evaluate anthocyanine contents, effective components and major botanical characteristics of the new developed colored rices. Characteristics of colored rice lines showed variation in culm length and spikelets per panicle in CNU39, panicle length in CNU43, 1,000 grain weight in CNU90, and yield per plant in CNU119 were highly compared to the Check, Heugjinjubyeo. Relative optical density(ROD) of Heugjinjubyeo was the highest at 530 nm, followed by CNU71, CNU73 and CNU119. The high peaks of ROD of Heugjinjubyeo and CNU71 appeared at 280 nm and 530 nm, and that of CNU43 appeared at 430 nm. The relative anthocyanin contents (RAC) per plant of the CU 71 among the new developed rice compared by yield per unit area was very high, fellowed by CNU73 and Heugjinjubyo.