• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.433-438
• /
• 2000

The purpose of this study is to examine the resistance of water-permeable concretes to freezing and thawing action. The water-permeable concretes with cement-aggregate ratio of 1:5.5(by weight) and two kinds of admixture content [SP : superplasticizer(0, 1.0%), HPAE : high performance air entraining agent(0.5, 1%)] used OPC(ordinary portland cement) as binder were prepared, and then tested for relative dynamic modulus of elasiticity, mass change, length change and durablity factor. It's been concluded from the test results that the superior relative dynamic modulus of elasiticity and durability factor of water-permeable concretes were obtained at superplaciticizer 1.0% after 300 cycles. The water-permeable concretes used superplasiticizer 1.0% having relative durability factor of 88% after 300 cycles.

• Journal of radiological science and technology
• /
• v.20 no.2
• /
• pp.28-33
• /
• 1997

For the Evaluation of X-ray image intensifier, we measured radiation dose at input of I. I., brightness and fluorescence at output of I. I. by using X-ray exposure meter, optometer and fluorescence meter for the relative conversion factor. Especially, by using fluorescence meter, we could easily get relative conversion factor without having regulated machine by JIS. Since using, the quality of image intensifier is going down. Consequently, it needs continuous quality maintenance.

• East Asian Economic Review
• /
• v.21 no.3
• /
• pp.201-230
• /
• 2017

This paper studies the long-run behavior of relative price dispersion among cities in Korea with a special emphasis on heterogeneous transitional patterns of price level dynamics. Formal statistical tests indicate considerable evidence for rejecting the null of relative price level convergence among the majority of cities over the sample period of 1985-2015. The analysis of gravity model suggests that the effect of transportation costs on intercity price level differentials is limited, while other socioeconomic factors, such as income, input factor prices, demographic structure, and housing price growth, play key roles in accounting for persistent regional price level disparities. Individual price levels are found to be better explained by a multiple-component model, and the deviations from PPP may be attributed to distinct stochastic common trends that are characterized by income and demographic structure.

• Earthquakes and Structures
• /
• v.4 no.5
• /
• pp.489-508
• /
• 2013

Design spectra for damping ratios higher than 5% have several important applications in the design of earthquake-resistant structures. These highly damped spectra are usually derived from a 5%-damped reference pseudo-acceleration spectrum by using a damping modification factor. In cases of high damping, the absolute acceleration and the relative velocity spectra instead of the pseudo-acceleration and the pseudo-velocity spectra should be used. This paper elaborates on the recovery of spectral absolute acceleration and spectral relative velocity from their pseudo-spectral counterparts. This is accomplished with the aid of correction factors obtained through extensive parametric studies, which come out to be functions of period and damping ratio.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3118-3126
• /
• 1994

This paper describes the use of the concept of (relative) entropy for effective characterization of the amplitude and the frequency distributions of the surface profile formed in machining operation. For this purpose, a theoretical model for surface texture formation in turning operation is developed first. Then, the concept of (relative) entropy is reviewed and its effectiveness is examined based on the simulation and experimental results. The results also suggest that under random tool vibration the effect of the geometrical factors on the surface texture formation can be successfully decomposed and therefore, identified by applying the concept of (relative) entropy.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.25-35
• /
• 2003

In this paper, we have re-examined the relative sunspot numbers from June 1987 to December 2002 observed at Korea Astronomy Observatory. For this we determined conversion factors (K) for each year data to derive the relative sunspot numbers. The estimated conversion factor ranges from 0.57 to 1.09 and has a trend to decrease with time, which seem to depend on the several effects such as observational system, observation methods, and experience of an observer. Our analysis shows that the newly-determined relative sunspot numbers are in much better agreements with the international sunspot numbers than the previously-determined ones in which the conversion factors were determined only four times. This result implies that we should determine the conversion factor for each year data. From these investigations, we also identified one and half solar cycles form our relative sunspot number.

• Journal of Korean Academy of Nursing
• /
• v.41 no.3
• /
• pp.302-312
• /
• 2011

Purpose: The purpose of this study was to develop a resource-based relative value scale (RBRVS) and its conversion factor for advanced nursing practices carried out by critical care nurse practitioners (CCNP) in intensive care units. Methods: The methodology was developed by calculating CCNP's RBRVS for 32 advanced nursing services based on CCNP's workload and time spent in the context of national health insurance. A cost analysis was performed to estimate the conversion factor of CCNP's RBRVS. The share of CCNP's contribution to fee-for-service in intensive care units was also analyzed. Results: Calculation of the RBRVS of 32 advanced nursing practices showed a range of points from 100.0 to 1,181.4 and an average of 296.1 points. The relevant conversion factor for advanced nursing practices in CCNP were estimated at 37.3-48.4 won. The contribution rate of CCNP's advanced nursing practices in the relative value scale of the national health insurance was estimated at 0.1-31.3%. Conclusion: Measuring the economic value of advanced nursing services will be a basis for esta-blishing a reimbursement system for CCNP's practices and thus encourage a social demand for advanced nurse practitioners.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.124-127
• /
• 2000

The finite element analyses of the wrinkling initiation and growth in the sheet metal forming process provide the detailed information about the wrinkling behavior of sheet metal. The direct analyses of the wrinkling initiation and growth, however, bring about a little difficulty in complex industrial problems because it needs large memory size and long computation time. For the description of wrinkling growth, the mesh elements should be sufficiently small and the size of finite element matrix becomes large. In the static implicit finite element method therefore, the direct analysis of wrinkling growth in a complex sheet metal forming process is rather difficult. From the industrial viewpoint of tooling design, the readily available information of possibility and location of wrinkling is sometimes more preferable to the detailed time-consuming information. In the present study, therefore, the wrinkling factor that shows locations and relative possibility of wrinkling initiation is proposed as a convenient tool of relative wrinkling estimation based on the energy criterion. The location and relative possibility of wrinkling initiation are predicted by calculating the wrinkling factor in various sheet metal forming processes such as cylindrical cup deep drawing, spherical cup deep drawing, and elliptical cup deep drawing. The wrinkling factor is also implemented in the analysis of the door inner stamping process to predict wrinkling.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1237-1243
• /
• 2014

The aim of the present paper is to analyze the friction and mass flow in a rough microchannel using Lattice Boltzmann Method (LBM). The LBM is a kinetic method based on the particle distribution function, so it can be fruitfully used to study the flow dependence on Knudsen number including slip velocity, pressure drop in rough microchannel. The surface roughness elements are taken to be considered as a series of circular shaped riblets throughout the channel with relative roughness height up to a maximum 10% of the channel height. The friction coefficients in terms of Poiseuille number (Pn), mass flow rate and the flow behaviors have been discussed in order to study the effect of surface roughness in the slip flow regime at Knudsen number (Kn), ranging from 0.01 to 0.10. It is seen that the friction factor and the flow behaviors in a rough microchannel strongly depend on the rarefaction effect and the relative roughness height. The friction factor in a rough microchannel is higher than that in smooth channel but the mass flow rate is lower than that of smooth channel. Moreover, it is seen that the friction factor increased with relative roughness height but decreased with increasing the Kundsen number (Kn) whereas the mass flow rate is decreased with increasing both of surface roughness height and Knudsen number.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.19-30
• /
• 2016

This study analyzed relative importance among business model factors for improving business performance of Knowledge Service Enterprises using the Business Model methodology. It also compares and analyzes the relative importance of manufacturing enterprises by using the previous research conclusion. This study finds Product & Service factor(0.361) is the most important among Marketing(0.251), Financial aspects(0.234), and Infrastructure(0.154) are follows. For the sub factors, Value Proposition(0.254) is the most importance factors and Revenue Streams(0.154), and Key Activities(0.107), and Key Resources(0.100), and Channels(0.086) are follows. Also, The Marketing has higher relative importance for Manufacturing enterprises, whereas the Product&Service has higher relative importance for Knowledge Service Enterprises. It proves that there is a difference in the relative importance between Manufacturing Enterprises and Knowledge Service Enterprises. This study concludes the importance of business model factor is different for each respective industry. Therefore, it suggests to consider different industrial aspects when build the business model for each industry.