• 건축역사연구
• /
• 제11권3호
• /
• pp.21-34
• /
• 2002

This study is to analyse the transformation process of spatial structure of traditional small city structure in Jeollabuk-Do in the process of modern urbanization between 19th century and the year 2000. The small cities, IM-PI, YONG-AN, YEO-SAN, OK-GOO, GO-SAN, MU-JANG, GUM-MA, GO-BU, which have been local administrative center in CHO-SUN dynasty, have role of local administrative center of subdivision of country-myon, except OK-GOO. The method of this study is to investigate the transformation process of spatial structural elements of with the actual field surveys, the analysis of Gunhyun map made in 1872, land registration maps in 1910s and 2000, and various topological maps. The elements of analysis are the topological site and geographical situation conditions, the urbanized areas, the street systems, the function of streets, the focal points of urban land use, the land use systems, and the location of major facilities such as administration facilities, markets, bus terminals. The analytical point of view and the results are as follows. There is strong relationship between the transformation of internal matrix route system and the growth pattern of urbanized areas, Especially on the contrary to the matrix route with East-West direction which has the role of checking the growth of urbanized area, the South-North direction route acts as the leading line of the growth. The focal points structure of urban land use shows transformation process from the point of central space of administrative district in front of Nae-A, to the access point to administrative district or to the access point to housing and neighborhood commercial area. From the point of functional area structure and major facilities location, line-type commercial area is developed along the line of central axis route and access route to administrative district. Especially direction of the growth of commercial area is strongly connected with the interrelationship between the study area and its neighboring cities. Pattern of commercial district development is varied with the direction of matrix route. That is, commercial district, which shows one side development pattern along the East-West direction route, is developed on both sides of street along the South-North direction route.

• 한국컴퓨터정보학회논문지
• /
• 제16권12호
• /
• pp.139-155
• /
• 2011

최근 몇 년 사이, 학부모는 물론 국가 차원에서 영재 교육에 대한 관심이 높아짐에 따라 영재 교육에 관한 많은 연구들이 발표되고 있다. 그러나, 그들 대부분의 초점이 개괄적이고 총론적인 관점에서 영재 교육 프로그램의 구축, 운영, 관리, 평가 등에 있고, 정작 교육 프로그램의 성패와 직결되는 구체적인 교수학습 주제를 다루는 연구는 극히 드물다. 오늘날 영재교육의 필요성이나 효율성이 재론되고 있는 원인 중의 하나는바로 영재 교육의 특수성들이 고려된 영역별 훌륭한 교육 시나리오의 빈곤에 있음을 부인할 수 없다. 따라서, 이 연구에서는 중등 정보과학 영재 사사 지도과정에서 적용되었던 탐구 내용을 소개함으로써 정보분야 영재교육을 위한 교수학습 자료 개발에 작은 보탬이 되고자한다. '컴퓨터과학에서 행렬의 필요성과 활용'이란 주제의 이 교수학습 자료는 중등 수학의 1차 연립방정식 풀이 과정을 기반으로 창의적 문제 발견 및 해결을 유도하도록 구성되었고, 수학과 컴퓨터 과학과의 긴밀한 연계성 및 선형대수학의 기초 개념 이해에도 유익하다.

• Journal of Pharmaceutical Investigation
• /
• 제17권3호
• /
• pp.111-126
• /
• 1987

Methyl methacrylate-butyl methacrylate copolymer (MMBM)-dibutyl phthalate (DBP) films were investigated as a potential topical drug delivery system for the controlled release of nitrofurazone. The kinetic analysis of release data indicated that drug release followed a diffusion-controlled granular matrix model, where the quantity released per unit area is proportional to the square root of time. DBP of several hydrophobic plasticizers selected was found to give the highest release of nitrofurazone. However, hydrophilic plasticizers such as propylene glycol and polyethylene glycol 400 had no controlled release properties and acceptable film formation. The effects of changes in film composition, drug concentration, film thickness, pH of release medium, and temperature on the in vitro release of nitrofurazone were analyzed both theoretically and experimentally. The release rate constant (k') was found to be proportional to DBP content, pH, and the temperature of release medium, but independent of film thickness, and drug concentration in a range of 0.1-0.4% by weight. The linear relationship was found to exist between the log k' and DBP content. The release of nitrofurazone from MMBM-DBP (8:2) films was found to be an energy-linked process. Two energy terms were calculated ; the activation energy for matrix diffusion was 13.45 kcal/mole, and the heat of drug crystal solvation was 27.26-29.34 kcal/mole. Observation of scanning electron micrographs and microscopic photographs showed that the incorporation of DBP in films increased markedly the particle size of nitrofurazone dispersed in the film matrix, comparing with the fine dispersion of nitrofurazone in pure MMBM film alone.

• 한국컴퓨터산업학회논문지
• /
• 제10권5호
• /
• pp.213-220
• /
• 2009

변수들간의 관계 모형을 설정하고 관계성 유무를 분석하는 회귀 분석은 거의 모든 조사 연구 및 실험연구들에서 필수적인 통계 분석 방법이다. 자료는 독립변수와 종속변수로 구성되므로 쌍으로 취급되며 모든 통계량 계산은 행렬 연산에 의하여 수행된다. 변수들 관계를 가장 잘 설명하는 모형 설정에 따라 회귀분석 결과의 정확성이 평가되므로 자료 수치들을 XY 평면상에서 점을 찍어 가장 적합한 함수 모형을 선택해야 한다. MS 엑셀의 그래픽 및 행렬 연산 기능의 메뉴들을 사용하면 수집된 자료에 가장 적합한 모형을 설정하고 필요한 모든 가설검정 작업을 쉽게 수행할 수 있다. 본 연구에서는 회귀 분석의 모형 설정 및 가설검정 결과들을 산출하는 엑셀 함수를 이용한 매크로를 개발하였다. 본 연구에서 개발한 회귀분석 매크로를 한 개의 종속변수와 3개의 독립 변수를 가진 지하철 전기요금 자료 분석에 적용하여 얻은 결과와 엑셀에 내장된 통계 회귀분석 메뉴를 적용한 결과를 비교한다.

• 대한교통학회지
• /
• 제23권3호
• /
• pp.61-71
• /
• 2005

본 연구는 Conjugate Gradient법을 적용하여 개발한 관측교통량기반 기종점 OD행렬 추정모형이 대규모 가로망에서도 적용 가능성이 있는지를 판단하기 위하여 246개죤 기준 전국 가로망에 적용하여 적용성 및 활용가능성을 판단해 보았다. 대규모 가로망에서 모형의 일치성을 분석한 결과, 모형의 상위수준과 하위수준이 내부적으로 유기적인 관계를 유지하고 있는 것으로 분석되었다. 관측링크 개수에 따라 모형의 추정력을 분석한 결과 교통량 오차는 허용오차 범위내에서 추정력을 확보하는 것으로 나z타났다. 또한 추정 기종점 OD행렬의 추정력 역시 기존의 모형을 이용한 결과치보다는 양호한 추정력을 보이고 있는 것으로 분석되었다. 더 많은 다양한 실험을 하여 개발된 모형의 알고리즘의 안정성이 확보된다면 대규모 가로망에서도 적용 가능성이 있다고 판단된다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1996년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1996

Ceramic based nanocomposite, in which nano-sized ceramics and metals were dispersed within matrix grains and/or at grain boundaries, were successfully fabricated in the ceramic/cerarnic and ceramic/metal composite systems such as $Al_2O_3$/SiC, $Al_2O_3$/$Si_3N_4$, MgO/SiC, mullite/SiC, $Si_3N_4/SiC, $Si_3N_4$/B, $Al_2O_3$/W, $Al_2O_3$/Mo, $Al_2O_3$/Ni and $ZrO_2$/Mo systems. In these systems, the ceramiclceramic composites were fabricated from homogeneously mixed powders, powders with thin coatings of the second phases and amorphous precursor composite powders by usual powder metallurgical methods. The ceramiclmetal nanocomposites were prepared by combination of H2 reduction of metal oxides in the early stage of sinterings and usual powder metallurgical processes. The transmission electron microscopic observation for the $Al_2O_3$/SiC nanocomposite indicated that the second phases less than 70nm were mainly located within matrix grains and the larger particles were dispersed at the grain boundaries. The similar observation was also identified for other cerarnic/ceramic and ceramiclmetal nanocornposites. The striking findings in these nanocomposites were that mechanical properties were significantly improved by the nano-sized dispersion from 5 to 10 vol% even at high temperatures. For example, the improvement in hcture strength by 2 to 5 times and in creep resistance by 2 to 4 orders was observed not only for the ceramidceramic nanocomposites but also for the ceramiclmetal nanocomposites with only 5~01%se cond phase. The newly developed silicon nitride/boron nitride nanocomposites, in which nano-sized hexagonal BN particulates with low Young's modulus and fracture strength were dispersed mainly within matrix grains, gave also the strong improvement in fracture strength and thermal shock fracture resistance. In presentation, the process-rnicro/nanostructure-properties relationship will be presented in detail. The special emphasis will be placed on the understanding of the roles of nano-sized dispersions on mechanical properties.

• Journal of Korean Neurosurgical Society
• /
• 제47권2호
• /
• pp.128-133
• /
• 2010

Objective : The secondary verification of Leksell Gamma Knife treatment planning system (LGP) (which is the primary verification system) is extremely important in order to minimize the risk of treatment errors. Although prior methods have been developed to verify maximum dose and treatment time, none have studied maximum dose coordinates and treatment volume. Methods : We simulated the skull shape as an ellipsoid with its center at the junction between the mammillary bodies and the brain stem. The radiation depths of the beamlets emitted from 201 collimators were calculated based on the relationship between this ellipsoid and a single beamlet expressed as a straight line. A computer program was coded to execute the algorithm. A database system was adopted to log the doses for $31{\times}31{\times}31$ or 29,791 matrix points allowing for future queries to be made of the matrix of interest. Results : When we compared the parameters in seven patients, all parameters showed good correlation. The number of matrix points with a dose higher than 30% of the maximal dose was within ${\pm}\;2%$ of LGP. The 50% dose volume, which is generally the target volume, differs maximally by 4.2%. The difference of the maximal dose ranges from 0.7% to 7%. Conclusion : Based on the results, the variable ellipsoid modeling technique or variable ellipsoid modeling technique (VEMT) can be a useful and independent tool to verify the important parameters of LGP and make up for LGP.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1102-1107
• /
• 1999

FeAl 기지 복합재료는 hot-pressing에 의해서 성공적으로 제조할 수 있다. 이러한 FeAl 합금의 기계적 특성에 대한 연구는 많이 진행되었으나 플라즈마 질화에 의한 표면 경화특성에 관한 연구는 아직 미흡한 실정이다. 본 연구에서는 hot-pressing으로 제조된 소결 복합재료의 미세구조와 플라즈마 질화처리시 표면경화의 관계를 분석하였다. FeAl을 기지로 하는 합금은 플라즈마 질화처리에 의해서 표면경도가 상승하는 경향을 보였고, 이러한 경향은 질화처리 시간이 증가할수록 더욱 뚜렷하였다($\textrm{H}_{\textrm{v}}$ 100gf, 확산층 : 1100~1450kg/$\textrm{mm}^2$, matrix : 330~360kg/$\textrm{mm}^2$). FeAl 합금으로 플라즈마 질화처리에 의해서 매우 우수한 표면경화특성을 얻을 수 있었다. 확산층은 플라즈마 질화처리시간이 증가할수록 두꺼워졌으며, SiC(sub)p의 함유량이 증가함에 따라 확산층은 감소하였다.

• 산경연구논집
• /
• 제9권1호
• /
• pp.89-97
• /
• 2018

Purpose - The Regional Comprehensive Economic Partnership (RCEP) among 16 countries including South Korea, the largest free trade agreement in the Asia-Pacific region, will be concluded next year. The participating countries decided to pursue a comprehensive and high -quality agreement, while ensuring flexibility considering development level of each country. In this study, trade structures between nations from 2005 through 2016 were examined to see the impact that this agreement will have on Korea and to come up with effective countermeasures. Research design, data, and methodology - The method of analysis includes the analysis of the trade matrix, which is useful for identifying the dependency of the individual countries on the market in the region and the reciprocal dependency of the member countries on the market, and the index of intensity of trade, which is useful for figuring out the share of trade between the parties in total trade. Results - The results showed that first, the international trade coefficients of Vietnam and Philippines are higher than those of China and Japan. Secondly, the international inducement coefficients between China and Japan were high, and that between Indonesia and Burma were low, indicating that Korea's exports did not have much effect on export increase of these countries. Third, as a result of analyzing Korea's trade intensity, it was found that export intensity and import intensity were greater than 1 in Vietnam and Philippines, which shows that there is a high degree of relational bond with these countries. India and Laos countries still have a low level of relational bond, which indicates that there is room for improvement in economic relations when the agreement is concluded. After the signing of the agreement in the future, more diverse industrial structures should be continuously studied. Conclusions - The analysis of trade matrix, trade structure, trade inducement coefficient and trade intensity between Korea and RCEP participating countries shows that the majority of the countries have the high level of economic relationship with Korea. Korea should drive a harder bargain when negotiating the terms of the RCEP, in comparison with the level of the existing FTA agreement excluding Japan.

• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.77-86
• /
• 2022

건설현장에서의 안전사고는 근로자의 생명을 앗아가는 중대한 사고로 이어질 수 있고, 정부차원에서 산업재해 감소를 위해 많은 노력을 기울이고 있는 만큼 건설현장에서 재해발생과 밀접한 관련이 있는 안전관리자의 역할이 중요해지고 있다. 하지만 현행 건설업 안전관리에 있어 안전관리자가 담당하는 업무량이 과도하게 많고, 효율적이지 못한 업무들로 인해 직무 스트레스가 많이 발생하고 있다. 따라서 업무내용의 개선 및 간소화가 필요한 실정이다. 본 연구의 주된 목적은 안전관리자 안전관리 단계의 업무들을 난이도와 예방효과에 대해 전문가 의견과 설문조사를 통해 2×2 Matrix 분석 기법을 활용해 비효율적인 업무의 간략화 및 개선이 필요한 업무들을 파악하고 개선방향을 제시함으로써, 궁극적으로 건설현장의 안전사고 발생을 줄이는 데 기여하고자 한다.