• 의료법학
• /
• 제18권1호
• /
• pp.61-99
• /
• 2017

마취는 수술 등 의료행위 시 많은 경우 필요불가결하게 동반될 수밖에 없고 마취 자체가 가진 특성 때문에 그로 인한 의료사고가 빈번하게 발생하고 있다. 마취와 관련된 의료사고가 의사의 과실로 인한 것인지를 판단하기 위해서는 마취의 전 단계를 통하여 의사 등 의료진에게 어떠한 주의의무가 요구되는지를 알아야 한다. 이 글에서는 이러한 주의의무의 기준 등을 알아보기 위하여 마취 관련된 의료사고로 판결이 선고된 1990년대부터 현재까지의 대법원 판결들과 최근의 하급심 판결사례들, 프로포폴이 사용된 사례들을 분석해보았다. 분석 결과 과거 흡입마취로 문제가 된 사례가 많았던 반면 최근에는 주로 정맥마취제나 국소마취제의 사용으로 문제가 된 사례가 많은 것을 알 수 있었고, 특히 마취제 중 프로포폴이 관련된 사고가 2007년경 이후부터 상당히 많이 발생하여 법적 분쟁이 이루어졌음을 알 수 있었다. 그런데 대법원 판례들은 대부분 과거 흡입마취로 마취한 사례여서, 흡입마취의 경우 마취 시 의료진의 주의의무의 정도와 내용에 관해 어느 정도 기준이 제시되고 있었으나, 그 외의 경우에는 그러한 기준이 제시되었다고 보기에는 미흡해 보였다. 프로포폴의 사용과 관련한 마취사고가 끊이지 않고 있는 현실 등에 비추어 볼 때 우선 의료현장에서 각각의 마취제의 사용에 관한 임상지침 등을 세우고 이를 지켜나가는 것이 중요하겠지만, 의료현실이나 의료 관행에 하나의 나침반 역할을 할 수 있도록 법원에서도 우리의 현실에 맞는 적절한 주의의무의 기준을 제시하는 것이 필요하다고 하겠다.

• 건축역사연구
• /
• 제6권1호
• /
• pp.9-25
• /
• 1997

The purpose of this study is to examine the standard scale of measuring a block of Kyongju(慶州), the Capital of the Silla Dynasty(B.C.57${\sim}$A.D.935). Through the study, it is clarified that 1). the block of Kyongju city is planned and divided by using the eight-Zhou-foot(周尺) as a standard scale, which is equivalent to the length of one-bo(보(步); 2). the distance between the center of the streets is around 100 bo and the width of the block is around 90 bo; 3). the distance between the streets is very near to the distance 167.054m of Jing-tian-zhi(井田制), which supports the use of Zhou-foot as a standard scale. As a result, it can be maintained that the city planning of Kyongju is related to that the Jing-tian-zhi of the Zhou Dynasty and the standard scale of measuring a block of Kyongju us executed by using the eight-Zhou-foot standard scale.

• 가정∙방문간호학회지
• /
• 제24권3호
• /
• pp.275-283
• /
• 2017

Purpose: This study was conducted to examine the characteristics and knowledge of needlestick injuries, and compliance with standard precautions, in healthcare workers. Method: The participants were 185 healthcare workers working at university hospitals. Data were collected in May 2016 and analyzed using descriptive statistics, t-test, ANOVA, and Pearson correlation coefficients using SPSS 18.0 program. Results: It was found that 45.4% of the subjects had experienced needlestick injuries. The most common rate of getting injured was 1 or 2 times, and the most common reason for the occurrence of needlestick injuires was carelessness(66.6%). The mean scores for knowledge of needlestick injuries and compliance with standard precautions were above average. Significant correlations were found between knowledge of needlestick injuries and compliance with standard precautions in health workers, and Characteristics were related to the significant differences seen in both. Conclusion: These findings indicate that standard precautions and guidelines for the use of sharp instruments should be emphasized in order to prevent needlestick injuries in healthcare workers.

• 한국BIM학회 논문집
• /
• 제8권3호
• /
• pp.20-30
• /
• 2018

The Standard for BIM in Construction of China was released in 2017. The Unified Standard for BIM of China also took effects on 2017. The BIM standards of China needs to be compared with those related guidelines of Korea to find the status and characteristics for future development of BIM application in both countries' construction industries. The research methodology is a case study of comparing various standards of both countries. The case study results reveals many interesting issues for future BIM application and guidelines for practice of design and construction process. The research foundings include followings : LOD (Level of development) are well defined including LOD 350 in Chinese Standard. P-BIM(Practice based BIM) concepts and series of standards are set for the well-defined design and construction process by work stage in China. Korean standards shows more processes of design and documentation in detail. Major three aspects, particularity in BIM standard by work trade, practicality in BIM work process of design and construction, and professionality in subjects of BIM application, are analyzed and compared with various Guidelines of BIM in both countries.

• 한국안전학회지
• /
• 제35권2호
• /
• pp.8-16
• /
• 2020

In Article 311 of the Regulation on Occupational Safety and Health Standards requires the use of Korean Industrial Standards Act in accordance with the Industrial Standardization Act. However, the classification, inspection, maintenance, design, selection, and installation of explosion hazard locations for explosion and explosion prevention and internalization of 'safety' in the performance maintenance phase of electrical machinery and equipment There is no technical and institutional management plan for remodeling and alteration. Analysis of actual conditions and problems related to the installation, use, and maintenance of explosion-proof equipment, comparative analysis of domestic and international technical standards and systems, technical, institutional and administrative systems and systems related to installation, use, and maintenance of explosion-proof equipment, technical personnel and qualifications, etc. It is to propose legislation, system improvement, and technical standard establishment related to the maintenance of explosion-proof facility performance through improvement of the necessity and feasibility study for establishment of the legal status of the management site and management plan. As technical measures, KS standard revision (draft), KOSHA guide (draft) and explosion-proof facility performance maintenance manual were presented. In addition, the institutional management plan proposed the revised rule on occupational safety and health standards, the revised rule on the restriction of employment of hazardous work, and the manpower training program related to the maintenance of explosion-proof facilities and the qualification plan. Enhance safety at the installation, use, and maintenance stage of explosion-proof structured electrical machinery. It is expected to be used to classify explosion hazards, select related equipment, and to update and standardize standards related to installation, use and maintenance.

• 품질경영학회지
• /
• 제32권3호
• /
• pp.141-152
• /
• 2004

This study describes process and method to establish concurrent and/or sequential schedule planning for the system design process of the EIA632 standard. For this purpose, the study suggest Process and method that are context analysis of standard process, interface definition from activity decomposition, integration of related activities, and definition of concurrent and/or sequential work flow. The proposed process and method will contribute to minimize time loss that is emerged from activities iteration.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.406-409
• /
• 2005

본 연구는 프로그램의 완성도와 관련하여 분쟁이 있을시에 분쟁조정을 위한 연구 내용이다. 따라서 본 연구 내용에서는 분쟁조정의 객관성 확보를 위한 가중치 설정 방안, 각 기능들에 대한 중요도 부여 방안 등을 제시한 연구 내용이다.

• 전자통신동향분석
• /
• 제35권2호
• /
• pp.50-68
• /
• 2020

Distributed Ledger Technology (DLT) refers to a process and related technologies that enable a person to safely suggest, verify, and record state changes (usually updates) to synchronize ledgers distributed across network nodes. DLTs are becoming increasingly important as data management requirements evolve. Therefore, they need to understand the current state of standards (such as distributed storage and access technologies) to address future requirements. This paper provides ITU-T FG-DLT standard activities, such as standardization ization trends, use cases, reference architectures, platform evaluation criteria and future prospects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.220-222
• /
• 2004

The IEC standards related to the Technical Regulation in Korea Electricity Business Act are classified into the standards/guides for electrical system and the specifications for electrical equipment/materials. IEC Standard 60364 "Electrical Installations of Buildings" and IEC Standard 61936 "Power Installations Exceeding 1 kV AC" prepared by IEC Technical Committee(TC) 64 and TC 99 respectively, are representative standards for electrical installations of buildings, substations, industrial plants, etc.

• 보험의학회지
• /
• 제28권1_2호
• /
• pp.7-10
• /
• 2009