• 제목/요약/키워드: Reinforcing

검색결과 3,015건 처리시간 0.027초

보론함량에 따른 D-glass의 유전율 특성 (Preparation and Dielectric Behavior of D-Glass with Different Boron Contents)

  • 정보라;이지선;이미재;임태영;이영진;전대우;신동욱;김진호
    • 한국재료학회지
    • /
    • 제27권1호
    • /
    • pp.39-42
    • /
    • 2017
  • E-glass (electrical glass) fiber is the widely used as a reinforced composite material of PCBs (printed circuit boards). However, E-glass fiber is not stable because it has a dielectric constant of 6~7. On the other hand, D-glass (dielectric glass) fiber has a low dielectric constant of 3~4.5. Thus, it is adaptable for use as a reinforcing material of PCBs. In this study, we fabricated D-glass compositions with low dielectric constant, and measured the electrical and optical properties. In the glass composition, the boron content was changed from 9 to 31 wt%. To confirm the dependence of the dielectric constant on melting properties, D-glass with 22 wt% boron was melted at $1550^{\circ}C$ and $1650^{\circ}C$ for 2hrs. The glass melted at $1650^{\circ}C$ had a lower dielectric constant than the glass melted at $1550^{\circ}C$. Therefore, the D-glass with boron of 9~31 wt% was fabricated by melting at $1650^{\circ}C$ for 2hrs, and transparent clear glass was obtained. We identified the non-crystalline nature of the glass using an XRD (x-ray diffractometer) graph. The visible light transmittance values depending on the boron contents were measured and found to be 88.6 % ~ 82.5 %. Finally, the dielectric constant of the D-glass with 31 wt% boron was found to have decreased from 4.18 to 3.93.

폭발 하중을 받는 보강된 방폭벽의 동적 구조 응답 특성에 관한 연구 (Dynamic Structural Response Characteristics of Stiffened Blast Wall under Explosion Loads)

  • 김상진;손정민;이종찬;리춘보;성동진;백점기
    • 대한조선학회논문집
    • /
    • 제51권5호
    • /
    • pp.380-387
    • /
    • 2014
  • Piper Alpha disaster drew attention to the damage likely to arise from explosions and fires on an offshore platform. And great concerns have been increased to prevent these hazards. Blast wall is one of the passive safety systems; it plays a key part of minimizing the consequences. However, a buckling due to explosion loads is a factor which can reduce the strength of blast wall. The buckling often occurs between web and flange at the center of blast wall. This study aims to find a solution for reinforcing its strength by installing a flat plate at the spot where the buckling occurs. First of all, ANSYS finite element method is adopted to numerically compute the structural resistance characteristic of blast wall by using a quasi-static approach. Sequentially, the impact response characteristics of blast wall are investigated the effect on thickness of flat plate by using ANSYS/LS-DYNA. Finally, pressure-impulse diagrams (P-I diagram) are presented to permit easy assessment of structural response characteristics of stiffened blast wall. In this study, effective use is made to increase structural intensity. of blast wall and acquired important insights have been documented.

마이크로 컴퓨터를 이용한 수학 교수.학습법 개발에 관한 연구 (On the Development of Microcomputer-Assisted Mathematics Teaching/Learning Method)

  • 김창동;이태욱
    • 한국수학교육학회지시리즈A:수학교육
    • /
    • 제27권1호
    • /
    • pp.15-23
    • /
    • 1988
  • We are at the onset of a major revolution in education, a revolution unparalleled since the invention of the printing press. The computer will be the instrument of this revolution. Computers and computer application are everywhere these days. Everyone can't avoid the influence of the computer in today's world. The computer is no longer a magical, unfamiliar tool that is used only by researchers or scholars or scientists. The computer helps us do our jobs and even routine tasks more effectively and efficiently. More importantly, it gives us power never before available to solve complex problems. Mathematics instruction in secondary schools is frequently perceived to be more a amendable to the use of computers than are other areas of the school curriculum. This is based on the perception of mathematics as a subject with clearly defined objectives and outcomes that can be reliably measured by devices readily at hand or easily constructed by teachers or researchers. Because of this reason, the first large-scale computerized curriculum projects were in mathematics, and the first educational computer games were mathematics games. And now, the entire mathematics curriculum appears to be the first of the traditional school curriculum areas to be undergoing substantial trasformation because of computers. Recently, many research-Institutes of our country are going to study on computers in orders to use it in mathematics education, but the study is still start ing-step. In order to keep abreast of this trend necessity, and to enhance mathematics teaching/learning which is instructed lecture-based teaching/learning at the present time, this study aims to develop/present practical method of computer-using. This is devided into three methods. 1. Programming teaching/learning method This part is presented the following five types which can teach/learn the mathematical concepts and principle through concise program. (Type 1) Complete a program. (Type 2) Know the given program's content and predict the output. (Type 3) Write a program of the given flow-chart and solve the problem. (Type 4) Make an inference from an error message, find errors and correct them. (Type 5) Investigate complex mathematical fact through program and annotate a program. 2. Problem-solving teaching/learning method solving This part is illustrated how a computer can be used as a tool to help students solve realistic mathematical problems while simultaneously reinforcing their understanding of problem-solving processes. Here, four different problems are presented. For each problem, a four-stage problem-solving model of polya is given: Problem statement, Problem analysis, Computer program, and Looking back/Looking ahead. 3. CAI program teaching/learning method This part is developed/presented courseware of sine theorem section (Mathematics I for high school) in order to avail individualized learning or interactive learning with teacher. (Appendix I, II)

  • PDF

국산 삼나무를 이용한 구조용 집성재 이용기술 (Development of Structural Glued Laminated Timber with Domestic Cedar)

  • 김광모;심상로;심국보;박주생;김운섭;김병남;여환명
    • Journal of the Korean Wood Science and Technology
    • /
    • 제37권3호
    • /
    • pp.184-191
    • /
    • 2009
  • 삼나무 원목은 제주도를 중심으로 점차 생산량이 증가하고 있으나, 옹이 등의 결함으로 인하여 목재자원으로서의 가치가 낮게 평가되고 있다. 본 연구에서는 삼나무에 대한 고부가가치의 새로운 용도 창출을 목적으로 구조용 집성재 이용 가능성을 확인하였다. 먼저 삼나무 제재목의 기계응력등급을 조사한 결과 국내의 다른 주요 침엽수종에 비해서는 다소 불량하지만 KS에 적합한 집성재 적층 구성에는 무리가 없는 것으로 확인되었다. 또한 집성재 제조에 필수적인 접착성 및 접착내구성에 있어서도 우수한 성능을 나타내었다. 그러나 집성재의 구조 성능을 평가한 결과, 휨 탄성계수가 KS의 기준에 다소 미달하는 결과를 나타내어 집성재의 강성 보강을 위한 추가적인 검토가 요구되었다.

농도 분극이 저감된 정삼투 분리막 제조 (Preparation of Forward Osmosis Membranes with Low Internal Concentration Polarization)

  • 김노원;정보람
    • 멤브레인
    • /
    • 제24권6호
    • /
    • pp.453-462
    • /
    • 2014
  • 폴리에스터(polyester) 부직포 상에 폴리술폰(polysulfone) 고분자 지지체를 만든 후, 그 표면에 폴리아미드 복합 박막을 형성시킴으로써 정삼투(FO) 공정에 적합한 분리막을 제조하였다. PSF 지지체는 19 중량%의 함량으로 디메틸 포름아미드(DMF)에 균일하게 용해된 폴리술폰 용액을 상 전이 공정을 통하여 제조되었으며, 기계적 보강재로 $100{\mu}m$의 두께를 가지는 폴리에스터 부직포를 사용하였다. 19 중량%의 PSF/DMF 용액으로 제조된 PSF 지지층은 sponge-like구조를 가지는 비대칭 내부 구조를 나타내었다. 정삼투(FO) 공정에서 내부의 농도 분극을 줄이기 위하여, $20{\mu}m$의 얇은 부직포 보강층을 가지는 지지체 상에 9~19 중량%의 PSF/DMF 용액으로 PSF 지지체를 제조하였다. 이들 얇은 부직포 보강층에서 제조된 지지층들은 공극률이 향상된 sponge-like구조를 가지는 것을 확인할 수 있었다. 각각의 지지층들 표면에 방향족 폴리아미드 가교 반응을 통하여 복합 박막을 얻을 수 있었다. FO 운전 결과, 12 중량%의 DMF/PSF 용액으로 제조한 지지체를 가지는 복합 박막이 가장 우수한 투과 성능을 보여 주었다. 이 경우 4.5 LMH의 유량과 3.47 GMH의 염의 역확산 속도를 가지는 역삼투 분리막에 사용되는 두꺼운 부직포에 비해 약 2.5배 유량이 많은 24.3 LMH의 유량과 1.5 GMH의 염의 역확산 속도를 보여주고 있다. 부직포의 두께 저하와 이에 적합한 PSF 캐스팅 용액의 최적화를 통하여 부직포와 PSF층의 경계면 공극률을 향상시킬 수 있었다.

Suppression of Cocaine Intake by Acupuncture at HT7

  • Lee, Bong-Hyo;Kim, Sung-Hwan;Lim, Sung-Chul;Kim, Jae-Su;Lee, Yun-Kyu;Lee, Ji-Hye;Jung, Tae-Young;Yang, Chae-Ha;Yoon, Seong-Shoon;Han, Chang-Hyun;Lee, Kyung-Min
    • 대한한의학회지
    • /
    • 제31권3호
    • /
    • pp.17-27
    • /
    • 2010
  • Objectives: Cocaine has been well known as a representative drug of abuse for its strong reinforcing effect linked to the mesolimbic reward system including dopamine, and such reinforcement leads to the addiction. Acupuncture has been used widely in eastern Asia for the treatment of various diseases including mental disorders and psychiatric problems, and is gathering more interest as one of the complementary and alternative medicines in western countries. In a previous study, we demonstrated that acupuncture at HT7 could affect dopamine release in the mesolimbic system of rats sensitized to alcohol and morphine. This study was designed to investigate whether acupuncture at HT7 could attenuate cocaine intake or not. Material & Methods: Male Sprague-Dawley rats weighing 270-300 g at the start of experiment were trained to self-administer food pellets under a fixed ratio 1 schedule. After the success of acquisition of 100 pellets within 3 h for 3 consecutive days, animals were subjected to surgery whereby Silastic tubing was implanted into right jugular vein and secured with mesh under the anesthetization using pentobarbital injection (50 mg/kg, i.p.). Following recovery, rats were trained to self-administer cocaine (0.25 mg/kg) in daily 2 h sessions under fixed ratio 1 schedule over 10 days. Each treatment was performed on the next day of each establishment of baseline. Results: Results show that acupuncture at HT7, but not at control points, reduced cocaine intake significantly. Acupuncture at HT7 decreased selectively active lever response from $63.15{\pm}3.35$ to $51.46{\pm}3.99$ corresponding $82.12{\pm}5.31%$ compared to basal level. Also, it was demonstrated that the effect of acupuncture was mainly occurred at the half period. Nevertheless, acupuncture at HT7 did not influence the food taking behavior. Conclusions: From the results of this study, it may be suggested that acupuncture at HT7, at least in part, could contribute to the treatment of cocaine abuse.

사회적경제와 소비자 관점의 공유가치창출(CSV) 연구 (A Study on CSV of Social Economy and Consumer Perspective)

  • 이영일;김영신
    • 유통과학연구
    • /
    • 제13권12호
    • /
    • pp.53-63
    • /
    • 2015
  • Purpose - Recently, creating shared value (CSV) has attracted attention through plan sustainability and the growth of corporate management. Porter and Kramer (2011) defined the core concept of CSV as social value, economic profits, improvements in the economic social condition, and reinforcing competitiveness. The purpose of CSV, which is to pursue economic profits through a social solution to the problem, agrees with managing the objective of a social enterprise that prioritizes the pursuit of profits through the realization of a social purpose. Today, CSV studies focus on CSR and sustainability and reinforce competitiveness. However, few studies focused on the social economy. Precedent studies examined CSV using a company example, and few studies exist from the perspective of consumers and the point of view of a market society. Research design, data, and methodology - Therefore, this study examines CSV in comparison to a background of the social economy. This study also investigates and analyzes the concept of social value from the point of view of consumers, social problems, consumption value, corporate value, and the influence of consumers. This article develops three hypotheses. Hypothesis 1 investigates the correlation with social innovation that consumers thought as being necessary for social innovation by a company. Hypothesis 2 is used to confirm the influence of consumers in CSV. Therefore, this article investigates the influence of consumers on consumption action for companies that are indifferent to social problems. Hypothesis 3 is used to verify the correlation between the value that consumers demand through consumption and the corporate value that companies pursue other than profits. The three hypotheses were adopted and met the standard for suitability. Results - The importance of the CSV study from the consumer perspective was confirmed using the influence of consumers on CSV. Because the objective of company activities is either the consumer or the market, the influence that extends to interactions between the company and consumers to ensure the success of a business is significant. Regarding the CSV study, because it was an initial study, various approaches are subsequently developed. However, conceptual and practical case studies on CSV currently exist that may be used to verify the factors that comprise CSV. Therefore, the company example may enable verification of the factors that influence the composition of CSV through identification from the consumer perspective. In addition, studying CSV as an action result (of consumer satisfaction, of a company's profits and competitiveness, and of society's cancellation of a social problem) may enable the realization of a practice paradigm as opposed to simply thought and faith. Conclusions - First, this study confirms the social value of a business through the feasible and common pursuit of consumers by corporations. Second, customer influence accounts for an important part of CSV. Third, shared value commonly provides a necessary advantage to consumers, corporates, and society, and contributes to the economy and healthy social development. Fourth, corporates can conduct a business, generate profits, and realize value through improvements in social problems and by addressing their competitive strengths and weaknesses.

지표 및 시추공 전기비저항 탐사를 중심으로 (Verification of Reinforcement with Grouting Materials in a Small Scale Reservoir Dike using Surface and Borehole Electrical Resistivity survey)

  • 송성호;용환호;김양빈
    • 지구물리와물리탐사
    • /
    • 제12권3호
    • /
    • pp.239-245
    • /
    • 2009
  • 저수지 제체 누수구간에 대한 지수를 목적으로 분말도가 서로 다른 콜로이드 시멘트와 보통 포틀랜드 시멘트 그라우트를 이용한 그라우팅을 수행하였으며, 주입 효과 검증을 위하여 그라우팅 전후에 변수위 투수시험과 지표 및 시추공을 이용한 전기비저항 탐사를 실시하였다. 투수시험 결과 그라우팅 이후에 투수계수가 약 10배 이상 낮아지는데, 이는 그라우트 재질에 상관없이 주된 누수구간이 효과적으로 지수됨에 따른 결과로 판단된다. 쌍극자배열 전기비저항 탐사 결과 그라우팅 이후 주입 구간 전체에서 저비저항대가 수평적으로 발달되는 결과가 나타나며, 전기비저항 수직탐사를 이용한 모니터링 결과 그라우트 주입구간에서 겉보기 비저항이 주입 이전에 비해 낮아지는 것으로 나타났다. 또한 검사공을 이용한 전기비저항 토모그래피 탐사 결과 제체 상부에서 수행한 전기비저항 수직탐사 결과와 일치되는 것으로 해석되었다. 따라서, 향후 검사공을 이용한 그라우팅 효과 판정 시 지표 및 시추공을 이용한 전기비저항 탐사 방법을 병행하는 경우 제체의 그라우팅 효과에 대한 공간적인 검증이 가능함을 확인하였다.

상생협력 분임조 혁신활동 활성화 방안에 관한 연구 (A Study on Activation in Win-Win Cooperation Quality Circle Innovation Activities)

  • 안효범
    • 산업진흥연구
    • /
    • 제3권1호
    • /
    • pp.43-48
    • /
    • 2018
  • 본 연구는 기업 간 상생협력활동을 통한 동반성장이라는 목표 아래, 상생협력 분임조 혁신활동의 선도모델 개발 및 활성화를 위하여 다음과 같은 연구를 수행하였다. 첫째, 최근 3개년(2014년~2016년)동안 국가품질상의 범주 내에서 실시된 전국 품질분임조 경진대회 상생협력 부문에 참여한 총 18개 기업들의 주요 발표문집을 중심으로 사례분석을 실시하였으며 문제점 및 개선방안을 도출하였다. 둘째, 2017년 전국 품질분임조 경진대회 상생협력부문의 심사기준을 분석하고 각 활동단계별 우수사례를 선정하여 최적화된 상생협력 분임조 혁신활동의 활동요령 가이드를 제시하였다. 셋째, 상생협력 분임조 혁신활동의 활성화 및 참여유도 확산을 위한 성과공유의 시스템 강화방안을 제안하였다. 이러한 기업 간 상생협력의 시스템 강화방안을 통하여 상생협력이 새로운 기업문화로 정착할 수 있도록 노력하는 한편 상생협력 기업 간 생산성 및 품질향상 등 기업경쟁력 제고를 바탕으로 기업 간 동반성장의 목표를 달성하는데 기여할 것으로 기대한다.

주철근 겹침이음 및 형상비에 따른 철근콘크리트 교각의 내진거동 분석 (Seismic Performance Analysis of RC Piers with Lap-spliced Reinforced Steel and Differentiated Aspect Ratios)

  • 조창백;신호진;곽임종;정영수
    • 한국지진공학회논문집
    • /
    • 제16권5호
    • /
    • pp.41-53
    • /
    • 2012
  • 국내외 교량의 내진성능 평가관련 연구들을 조사, 분석한 결과 국내에서 휨 거동 교각의 내진성능에 대한 연구는 상당히 이루어졌으나, 국내에 상당수 분포하는 것으로 분석된 휨-전단 교각에 대해서는 연구실적이 부족한 것으로 파악되었다. 따라서, 이 연구에서는 휨-전단 복합거동이 예측되는 형상비 2.67과 전단거동이 예측되는 형상비 2.25의 실물크기 실험체 및 형상비 2.67의 축소모형 실험체를 제작하여 준정적 내진성능 실험을 실시하였으 며, 주철근의 겹침이음과, 형상비 변화에 따른 파괴거동을 조사 및 분석하였다. 실험결과 휨-전단거동이 예상되는 형상비 부근의 교각은 형상비와 철근상세 변화에 따라 파괴거동 특성이 휨-전단 파괴에서 전단 파괴 또는 휨 파괴, 그리고 주철근 부착파괴로 변하는 것을 확인할 수 있었다. 이와 같은 실험결과들로부터 비내진 원형 철근콘크리트 교각에 대한 항복변위 및 극한변위 산정식을 제안하여 실험을 실시하지 않고도 실제 비내진 교각의 내진성능을 파악할 수 있도록 하였으며, 이는 추후 비내진으로 분류되는 실제 교량의 내진성능 조사 및 보수보강에 큰 도움이 될 것으로 판단된다.