• Steel and Composite Structures
• /
• 제30권1호
• /
• pp.1-12
• /
• 2019

In this research, an efficient mixed mode I/II fracture criterion is developed for fracture investigation of orthotropic materials wherein crack is placed along the fibers. This criterion is developed based on extension of well-known Maximum Tensile Stress (MTS) criterion in conjunction with a novel material model titled as Equivalent Reinforced Isotropic Model (ERIM). In this model, orthotropic material is replaced with an isotropic matrix reinforced with fibers. A comparison between available experimental observations and theoretical estimation implies on capability of developed criterion for predicting both crack propagation direction and fracture instance, wherein the achieved fracture limit curves are also compatible with fracture mechanism of orthotic materials. It is also shown that unlike isotropic materials, fracture toughness of orthotic materials in mode $I(K)_{IC}{\mid})$ cannot be introduced as the maximum load bearing capacity and thus new fracture mechanics property, named here as maximum orthotropic fracture toughness in mode $I(K_{IC}{\mid}^{ortho}_{max})$ is defined. Optimum angle between crack and fiber direction for maximum load bearing in orthotropic materials is also defined.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.59-67
• /
• 2020

Polycarbonate thermoplastic composite materials are anisotropic and exhibit physical properties in the longitudinal direction. Therefore, the physical properties depend on the type and direction of reinforcements. The thermal conductivity, electrical conductivity, and resin impregnation can be controlled by adding carbon nanotubes to polycarbonate resin. However, the carbon fiber used as a reinforcing material is expensive, interfacial adhesion issues occur, and simulation values are different from actual values, making it difficult to perform mathematical analysis. However, carbon nanotubes have advantages such as light weight, rigidity, impact resistance, and reduced number of parts compared to metals. Due to these advantages, it has been applied to various products to reduce weight, improve corrosion resistance, and increase impact durability. As the content of carbon nanotubes or carbon fibers increases, the mechanical properties and antistatic and electromagnetic shielding performance improve. It is expected that the amount of carbon nanotubes or carbon fibers can be optimized and applied to various industrial products.

• Advances in concrete construction
• /
• 제15권2호
• /
• pp.115-126
• /
• 2023

This paper investigates creep analysis of a plate made of Al-SiC functionally graded material using Mendelson's method of successive elastic solution. All mechanical and thermal material properties, except Poisson's ratio, are assumed to be variable along the thickness direction based on the volume fraction of reinforcement and thickness. First, the basic relations of the plate are derived using the Love-Kirchhoff plate theory. The solution of governing equations yields an elastic solution to start creep analysis. The creep behavior is demonstrated through Norton's equation based on Pandey's experimental results extracted for Al-SiC functionally graded material. A linear variation is assumed for temperature distribution along the thickness direction. The creep strain, as well as the thermal strain, are included in the governing equations derived from classical plate theory for mechanical strain. A successive elastic solution based on Mendelson's method is employed to derive the history of stresses, strains, and displacements over a long time. History of stresses and deformations are obtained over a long time to predict damage to the plate because of various loadings, and material composition along the thickness and planar directions.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.329-336
• /
• 2010

이 논문에서는 경간장이 30 m인 표준 PSC I 거더의 정착부 거동을 평가하기 위한 실험적 연구를 수행하였다. 현재 사용되고 있는 표준 PSC I 거더의 정착부 파열보강철근은 텐던 긴장으로 인한 단부 콘크리트의 응력흐름을 정확히 반영하지 못 한 채 설계되었고, 과대보강으로 인해 콘크리트 타설 시 작업성이 크게 떨어지고 있는 실정이다. 따라서 이 논문에서는 표준 PSC I 거더와 동일한 단면을 갖는 실험체 3개를 제작하여 인장실험을 수행하였다. 각 실험체의 파열보강철근은 100 mm, 200 mm, 300 mm 간격의 격자형으로 배근되었다. 실험결과, 파열균열 긴장력은 모든 실험체에서 설계 긴장력의 1.6배 내외로 나타났고, 파열균열은 정착단부 내부에서 수직방향으로 발생하였다. 또한 설계 긴장력의 2.7배까지 긴장력을 도입한 결과, 파열보강철근 간격이 300 mm인 실험체의 일부 수평방향 파열보강철근만 항복되었다. 따라서 표준 PSC I 거더의 정착부 파열보강철근은 도로교설계기준에서 제한하고 있는 최대 간격 300 mm를 만족시키는 것만으로도 파열력에 대한 안전성을 충분히 확보할 수 있음을 확인하였다.

• 지질공학
• /
• 제12권3호
• /
• pp.345-360
• /
• 2002

이 연구는 활동 가능성이 높은 퇴적암 사면에 대한 안정성을 분석하기 위해 수치해석을 수행하고, 안정성을 확보할 수 있는 보강공법을 제시하기 위한 목적으로 수행되었다. 연구지역은 백악기 하양층군의 학봉 현무암층에 해당하는 지역으로 대부분이 현무암질 응회암으로 구성되어 있으며, 지질 구조요소로는 크게 1차 구조 요소인 층리와 2차 구조요소인 절리 및 단층이 확인되었다 층리는 단사구조를 보이는데, 대부분의 경우 경사방향이 120~160/15~25(dip direction/dip)이고, 절리의 경우에는 크게 3개 조의 절리군이 확인되는데 세트 1은 310~330/65~85, 세트 2는 230~250/70~85이며, 세트 3은 뚜렷한 연장성을 보이지는 않지만 020의 경사방향에 85$^{\circ}$이상의 고각을 보이고 있다. 사면에 대한 안정성 해석은 운동학적 해석과 한계평형 해석을 수행한 후, 수치해석 방법으로 FLAC을 이용하였다. FLAC은 유한차분법을 이용하는 연속체 역학모델이지만, Interfaces Module을 이용하여 UDEC과 같은 불연속체 모델의 해석효과를 얻을 수 있었다.

• 한국해양공학회지
• /
• 제36권4호
• /
• pp.217-231
• /
• 2022

Reinforced polyurethane foam (R-PUF), a material for liquefied natural gas cargo containment systems, is expected to have different mechanical properties depending on its stacking position of foaming as the glass fiber reinforcement of R-PUF sinks inside R-PUF under the influence of gravity. In addition, since R-PUF is not a homogeneous material, it is also expected that the coordinate direction within this material has a great correlation with the mechanical properties. So, this study was conducted to confirm this correlation with the one between the mechanical properties and the stacking position. In particular, in this study, R-PUF of 3 different densities (130, 170, and 210 kg/m³) was used, and tensile, compression, and shear tests of this material were performed under 5 temperatures. As a result of the tests, it was confirmed that the strength and modulus of elasticity of the material increased as the temperature decreased. Specifically, the strength and modulus of elasticity in the Z direction, which was the lamination direction, tended to be lower than those in the other directions. Finally, the strength and elastic modulus of different specimens of the material found at the bottom of their lamination compared to the specimens with these properties found at positions other than their lamination bottom were evaluated. Further analysis confirmed that as the temperature decreased, hardening of R-PUF occurred, indicating that the strength and modulus of elasticity increased. On the other hand, as the density of R-PUF increased, a sharp increase in strength and elastic modulus of R-PUF was observed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.177-184
• /
• 1999

In soft ground tunneling, shield method is very good for safety of neighboring structures. Although shield tunnel method has the merits to minimize the deformation of ground around tunnel, ground deformations occurred until the material grouted in tail void hardens are inevitable. In this study, the effects of micropile used as one method to restrain the settlement of neighboring structures by the tail void are studied by laboratory model tests. As a basic test result, the effective direction of micropile and the restraint rate of settlement by micropile reinforcement are known.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.73-80
• /
• 1994

This paper is to study the mechanical behavor and structural safety of the wire-mesh half slab by an analytical method. Layer model was adopted by modelling the wire-mesh half slab as a flexural member composed of free cantilever beam and vertical supports (walls or beams). Reasonable results for the prediction of ultimate strength of the half stab at each loading direction and design recommendations for the reinforcement detail at wall(beam)-slab joints are acquired. On the other hand, ductility capacity of the wire-mesh half slab was overestimated by not considering the brittleness of wire-mesh reinforcements pre-manufactured at the form of Kaiser Truss.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.653-658
• /
• 2001

Recent long-span bridges, such as Kwang-Ahn Grand bridge, Seo-Hae Grand Bridge, Young-Jong Grand Bridge, etc, have been designed and constructed near the shore. Thus, it needs to analyze the durability of marine concrete structures which are exposed to severe chloride environments. It is well known that corrosion of reinforcement steel in concrete is one of the major factors for the durability of concrete structures. The objective of this experimental study is to investigate the performance of impressed current system and corrosion inhibitors for the corrosion protection of reinforced concrete structures. Concrete test specimens were made with various test parameters, such as cover depth, steel diameter, compressive strength, direction and frequency of notch. For the efficient evaluation of these corrosion protection systems, these tests have been carried out in the shore.

• Carbon letters
• /
• 제4권3호
• /
• pp.117-120
• /
• 2003

Asbestos is being replaced throughout the world among friction materials because of its carcinogenic nature. This has raised an important issue of heat dissipation in the non-asbestos brake pad materials being developed for automobiles etc. It has been found that two of the components i.e. carbon fibres as reinforcement and graphite powder as friction modifier, in the brake pad material, can playa vital role in this direction. The study reports the influence of these modifications on the thermal properties like coefficient of thermal expansion (CTE) and thermal conductivity along with the mechanical properties of nonasbestos brake pad composite samples developed in the laboratory.