• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.279-289
• /
• 2003

국내에 보강토 옹벽이 도입된지 20여 년이 다 되어가고, 많은 구조물들이 시공되었다. 특히, 콘크리트 패널식 전면체와 섬유보강재를 적용하는 시스템은 국내에 가장 널리 알려진 공법이다. 이 공법의 섬유보강재는 고강도 폴리에스테르 섬유와 LDPE 피복층을 갖는 구조를 가지고 있으며, 섬유보강재를 이용한 설계에서는 몇가지 합리적이지 못한 부분이 존재해 왔다. 설계인자의 결정이 선행된 외국데이터를 기준으로 하여 간접적인 방법에 의해 이루어졌으며 보강재의 장기크리프 거동에 대해서도 마찬가지로 인용된 자료를 이용하여 왔다. 따라서 본 연구에서는 실내시험을 통하여 직접적으로 섬유보강재의 설계인자를 도출하고자 하였으며, 그 결과, 설계연한동안 예상되는 크리프 허용강도는 최대파단강도의 약 60%였으며 크리프 감소계수는 1.67로 나타났다.

• 한국지반신소재학회논문집
• /
• 제3권1호
• /
• pp.43-52
• /
• 2004

단섬유를 혼합한 토사를 뒤채움재료로 사용한 보강토옹벽의 재하하중 단계 및 보강재 포설단수 별 거동특성을 평가하기 위하여 일련의 축소모형실험을 수행하였다. 높이 $100cm{\times}$길이 $140cm{\times}$폭 100cm 인 모형토조를 사용하여 1m 높이의 모형 보강토옹벽을 축조하였다. 본 모형실험에서 보강재로는 최대인장강도 0.79t/m인 지오네트와 최대인장강도 2.26t/m인 지오그리드를 사용하였으며, 화강풍화토에 폴리프로필렌 단섬유를 혼합한 토사를 뒤채움재로 사용하였다. 모형 보강토옹벽 축조후 5단계의 등분포하중($0.5kg/cm^2$, $1.0kg/cm^2$, $1.5kg/cm^2$, $2.0kg/cm^2$, $2.5kg/cm^2$)을 재하하면서 보강재의 인장변형 보강토옹벽 수평변위를 측정하여 하중재하시 모형 보강토옹벽의 거동특성을 평가하였다.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.153-162
• /
• 2007

치환공법을 적용하여 연약지반 상에 시공되는 보강토 옹벽에 대해 연약지반의 두께 및 강성, 치환깊이와 옹벽높이의 변화에 따른 옹벽의 거동을 연약지반 압밀현상과 시공단계를 함께 고려하는 유한요소해석으로 검토하였다. 옹벽의 거동은 벽체에 발생하는 변위와 침하량, 옹벽 기초지반에 발생하는 전단변형율로 표현하였다. 거동에 따른 옹벽의 안정성은 변위와 전단변형율의 한계값을 문헌연구로부터 정하고 이를 기준으로 평가하였다. 해석결과로부터, 옹벽의 거동은 연약지반 두께(t)와 강성, 치환깊이(d), 옹벽높이(h)의 변화에 따라 모두 영향을 받지만, 특히 d와 h의 변화에 민감한 것을 규명하였다. 또한, 옹벽의 안정성 유지를 위해 요구되는 d/h 값은 t와 h의 변화에 대하여 크게 영향을 받지 않음을 보였다. 이러한 결과로부터 연약지반 상 보강토 시공 구간 내에서 옹벽 높이가 변화하지만 그 변화정도가 극심하지 않은 경우에, 적정 치환깊이를 d/h로 나타낸 일률적인 값으로 제안할 수 있다는 결론을 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 토목섬유 특별세미나
• /
• pp.53-58
• /
• 2000

The KOESWall system that minimizes the horizontal deformation of reinforced wall effectively was developed bt E&S Eng. Co., Ltd. in 1999. Due to its systematical feature i.e. isolated construction method. KOESWall system is able to use as temporary structures more economically without the facing block. In this report, it is shown that the case history of KOESWall as a temporary soil retaining structure and the field measuremnets.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1774-1785
• /
• 2011

In this paper, Rigid Reinforced Roadbed(RRR) which is expected to have highly applicability to railroad roadbed, was introduced and field tests results were analyzed. Full scale model with 5m height concerning a single track railroad roadbed was constructed. The model had four different sections, which was to assess the effect of geogrid length, spacing, and connection method on deformation characteristics of RRR. Laser displacement meter, earth pressure cell, piezometer, and strain gauge were installed in order to analyze the behavior of reinforced embankment during construction. Horizontal displacements caused by compaction at each section were 20~30% below the displacement limit that of general reinforced retaining wall, which showed that RRR was very stable structure. Maximum tensile strength of reinforcement was withing 10% of the long-term design strength.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.379-386
• /
• 2000

This paper presents the results of finite element analysis on the seismic response of a soil-reinforced segmental retaining wall subjected to a prescribed earthquake record. The results of finite element analysis indicate that the maximum wall displacement occurs at the top, exhibiting a cantilever type of wall movement. Also revealed is that the increase in reinforcement force is more pronounced in the upper part of the reinforced zone, resulting in a more or less uniform distribution. None of the design guidelines appears to be able to correctly predict the dynamic force increase when compared with the results of finite element analysis. The calculation model adopted by the NCMA guideline, however, appears to compare better with the results of finite element analysis as well as field survey than the FHWA guideline. Based on the findings from this study, a number of implications to the current design methods are discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.772-781
• /
• 2010

In this study, a revegetation reinforced earth retaining wall to strengthen the strength than construction and make up for the weakness; eco-friendly part, of the existing facilities is new construction method. The special attention is that Eco-Metal reinforced retaining wall is not use concret. Before test construction on the scene, the stability of Eco-Metal reinforced retaining wall was checked by an experiment with a model and numerical analysis. The result of an experiment with a model was that the loaded tensile stress 40.2KN/m was more than long-term design tensile strength 29.4KN/m at Geogrid and a safety factor of numerical analysis was 1.14.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.101-108
• /
• 2000

This paper presents the results of finite element analysis on the seismic response of a soil-reinforced segmental retaining wall subjected to a prescribed earthquake record. The results of finite element analysis indicate that the maximum wall displacement occurs at the top, exhibiting a cantilever type of wall movement. Also revealed is that the increase in reinforcement force is more pronounced in the upper part of the reinforced zone, resulting in a more or less uniform distribution. None of the design guidelines appears to be able to correctly predict the dynamic force increase when compared with the results of finite element analysis. The results demonstrated that there exist critical stiffness and length of reinforcement beyond which further increase would not contribute to additional reinforcing effect. Based on the findings from this study, a number of implications to the current design methods are discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.121-130
• /
• 2006

Despite a number of advantages of reinforced earth walls over conventional concrete retaining walls, there exit concerns over long-term residual deformation when used as part of permanent structures. In view of these concerns, time-dependant deformation characteristics of geosynthetic reinforced modular block walls under sustained loads were investigated using reduced-scale model tests. The results indicated that a sustained load can yield appreciable magnitude of residual deformation, and that the magnitude of residual deformation depends on the loading characteristic as well as reinforcement stiffness.

• 한국철도학회논문집
• /
• 제3권2호
• /
• pp.84-91
• /
• 2000

The general concept of reinforced roadbed in the high-speed railway is to cope with the soft ground for the bearing capacity and settlement of foundation soil. The cyclic plate load tests were performed to determine the behavior of reinforced ground with multiple layers of geogrid underlying by soft soil. With the test results, the bearing capacity ratio, elastic rebound ratio, subgrade modulus and the strain of geogrids under loading were investigated. Based on these plate load tests, laboratory model tests under cyclic loading were conducted to estimate the effect of geogrid reinforcement in particular for the high-speed rail roadbed. The permanent settlement and the behavior of earth pressure in reinforced roadbed subjected to a combination of static and dynamic loading are presented.