• Korean Journal of Mathematics
• /
• v.28 no.1
• /
• pp.149-157
• /
• 2020

Some basic properties in connection with generalized relative order and generalized relative lower order of analytic functions in the unit disc have been dicussed in this article.

• Honam Mathematical Journal
• /
• v.37 no.1
• /
• pp.65-97
• /
• 2015

Orders and types of entire functions have been actively investigated by many authors. In this paper, we aim at investigating some basic properties in connection with sum and product of relative type and relative weak type of entire functions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.6
• /
• pp.769-775
• /
• 2008

This study was on the relative net income (RNI) for 18,286 Iranian Holstein cows from 799 herds, with first freshening between 1991 and 2000. Two kinds of production system, which differed mainly in milk pricing system and feed cost, were considered. Four different models adopted from the literature were examined to find the optimum model. They differed by the cost of rearing and growth after first calving and they needed different amounts of economic data at the farm level. Results showed that four measures of RNI were highly correlated (>0.96) and could be used equally to measure lifetime profitability of cows. Therefore, in herds without a regular system for recording economic and management data, use of the simplest model is recommended. Multiple regression analysis revealed that RNI was affected by age at first freshening, milk yield and days of productive life (DPL), regardless of production system, and a similar breeding goal could be defined for the two systems. Multiple regression analysis of RNI showed that in order to obtain an unbiased estimate of economic value for DPL, the per day milk yield, not total lifetime milk yield, should be included in the regression model along with DPL. Regression analysis suggested that it is possible to predict RNI using information on age at first freshening along with the length of first lactation and per day milk yield with a coefficient of determination ranging from 0.44 to 0.47.

• Journal of Korea Foundry Society
• /
• v.15 no.4
• /
• pp.408-415
• /
• 1995

Polycrystalline Al-Cu ribbons were produced by planar flow casting(PFC). Solidification behavior and microstructual changes of the ribbons have been investigated as a function of ribbon thickness and processing parameters. The solidification front velocity, V varies within the ribbon, decreasing with increasing the distance, S from the wheel-contact surface, as $V=17.6S^{-1}$. In Al-4.5wt%Cu alloy, rapid decrease in solidification velocity toward the free surface causes a change in solidification morphology from planar to cellular, and finally, to dendritic. The length and inclination of columnar grains solidified with planar front were related to the wheel velocity. The transition from particulate degenerate eutectic structure to regular lamellar eutectic structure was observed to be caused by a difference of the relative growth velocites of ${\alpha}-Al$ and ${\theta}$ during solidification in the Al-Cu eutectic alloy.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.344-349
• /
• 2009

To be Low Carbon and Green Growth, it is necessary that Long-Life Housing based on Green Technology is supplied. The main concern at the moment is developing Sustainable Housing relative to Life-Cycle or Life-Style of the residents, and the resident of Remodeling or Redevelopment. This study is aim to be Development of Maintenance Process in order to make steady dwelling when supplying Long-Life Housing that separates Support(Skeleton) and Infill different from the existing Short-Life Housing, and has durability, alterability, available remodeling, easy maintenance. Long-Life Housing should consider the maintenance about movement and variableness. In contrast, the maintenance of the existing Housing is regular maintenance, change and repair by damage. As well as Long-Life Housing should be demanded proper Development of Maintenance Process because of difference of Housing in concept, design and Construction. Therefore, this study looks into problems when applying Development of Maintenance Process in Long-Life Housing, and shows Development of Maintenance Process about the efficient Long-Life Housing for the manager.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.385-397
• /
• 2016

Scaffolds are essential in bone tissue engineering, as they provide support to cells and growth factors necessary to regenerate tissue. In addition, they meet the mechanical function of the bone while it regenerates. Currently, the multiple methods for designing and manufacturing scaffolds are based on regular structures from a unit cell that repeats in a given domain. However, these methods do not resemble the actual structure of the trabecular bone which may work against osseous tissue regeneration. To explore the design of porous structures with similar mechanical properties to native bone, a geometric generation scheme from a reaction-diffusion model and its manufacturing via a material jetting system is proposed. This article presents the methodology used, the geometric characteristics and the modulus of elasticity of the scaffolds designed and manufactured. The method proposed shows its potential to generate structures that allow to control the basic scaffold properties for bone tissue engineering such as the width of the channels and porosity. The mechanical properties of our scaffolds are similar to trabecular tissue present in vertebrae and tibia bones. Tests on the manufactured scaffolds show that it is necessary to consider the orientation of the object relative to the printing system because the channel geometry, mechanical properties and roughness are heavily influenced by the position of the surface analyzed with respect to the printing axis. A possible line for future work may be the establishment of a set of guidelines to consider the effects of manufacturing processes in designing stages.

• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2008

The North American ginseng (Panax quinquefolius L.) seed crop varies from year to year. The ability to hold stratified seed for a year would ensure continuity of seed supply and no interruption in production cycles. Seed drying and rehydration protocols at room temperature $(21{\pm}2^{\circ}C)$ were developed. These protocols and seed storage at 4 ${\pm}1^{\circ}C$ and 35%, or variable, relative humidity (RH) allowed the holding of stratified seed for one year and then establishment of the following five treatments in field plots: Trt.1 : dried 2005 stratified seed (seed harvested Fall 2004) held at $4^{\circ}C$ and at variable humidity; Trt.2 : 2006 stratified seed planted directly into the field; Trt.3 : 2005 stratified seed dried in October 2005 and held at $4^{\circ}C$ and 35% RH ; Trt.4 : 2005 stratified seed held in moist sand from October to December 2005 at room temperature $(21{\pm}2^{\circ}C)$ and then in December dried and held at $4^{\circ}C$ and 35 % RH; Trt.5 : 2005 stratified seed held in moist sand from October to December 2005 at room temperature and then in December dried and held at $-12^{\circ}C$ Seedling emergence was best in Trts. 2 and 4 with 67.3 and 65.1% respectively which is similar to the industry expected rate of 68% after regular stratification. Seedling growth was similar in Trts. 2 and 4 with root dry weights of 172 and 159 mg respectively in mid-August. Therefore, if holding stratified seed in August/September for one year is desired, the seed can be placed in moist sand until December and then dried and stored at $4^{\circ}C$ and 35% RH. These seed can be planted in the following August/September and will germinate and grow in the following year to give an acceptable crop.

• Journal of Conservation Science
• /
• v.6 no.2 s.8
• /
• pp.141-148
• /
• 1997

When we have entered high economic growth since 1970s, many archaeological excavations were performed all over the country. Excavated objects composed of variable materials are inevitably subjected to deformations owing to surrounding environments and storage conditions. Although the importance of conservation treatment of the objects is greatly increased, a few conservation laboratories are there comparing with excavation groups. The metallic objects excavated are very unstable and deformable state. So it is important not to allow iron objects, especially cast iron, to dry out once excavated. Because the corrosion reactions on the surface proceed rapidly, the objects may be destroyed at the moment. The conservation procedures of the excavated metallic objects are as follows: (1)It is stable on-site storage method for objects to keep vinyl film with envelop or to immerse alkaline solution to prevent the environmental changes. (2)The objects must be treated at once under suitable methods in the conservation laboratory after excavation. (3)The continued existence of objects depends on environmental factors such as relative humidities, regular inspection, light etc.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.1-7
• /
• 1984

This study was undertaken to find out the effects of three kinds of potting media and two sources of explants on the survival and early growth of new plantlets of Poputus alba ${\times}$ P. grandidentata in the greenhouse. The results obtained can be summarized as follows; 1) Among three potting media, Terralite was best for early growth and survival of plantlets. 2) Like humidifier, an intermittent misting system can be effective in keeping relative humidity high for the plantlets. 3) Survival rates over 80% could be obtained if humidity was kept high during the hardening period. 4) During hardening period, the plantlets showed the juvenile characteristics such as smaller leaves, thinner stems, and shorter internodes. 5) There were no differences on morphological characteristics between the plantlets originating from axillary buds and the plantlets originating from multiple shoots while they were growing at the greenhouse. 6) The plantlets originating from bud culture grew normally comparing to regular cuttings.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.106-114
• /
• 2008

This study was performed to analyze the distribution of air current speed, $CO_2$ concentration, and photosynthetic photon flux (PPF) in a closed transplants production system (CTPS) for producing quality transplants. And the effect of PPF on the growth of potato (Solanum tuberosum L. cv. Dejima) plug seedlings was analyzed. Uniformity of the air current speed in CTPS was improved by installing perforated floors in duct for air circulating and by adjusting of air flow rate of the fan connected to air conditioning unit used in this study, Measured $CO_2$ concentrations were measured $409{\pm}13$, $950{\pm}25$, and $1,550{\pm}35\;{\mu}mol{\cdot}mol^{-1}$ for setting values of 400, 950, and $1,550\;{\mu}mol{\cdot}mol^{-1}$, respectively. Uniformity of PPF by adding each one the single fluorescent lamp of 20 W at both ends of the single fluorescent lamps of 40 W was highly improved. While the average PPF measured under the twin fluorescent lamps of 55 W installed at regular intervals of 10 cm was decreased by increasing the vertical distance from the lighting sources, the ratio of average PPF measured at both ends to PPF measured in the center was 74-79%. Five levels ($100{\pm}9$, $150{\pm}14$, $200{\pm}17$, $250{\pm}24$ and $300{\pm}31{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) of PPF were provided to investigate the effect of PPF on plant height, fresh weight and dry weight of potato plug seedlings produced in CTPS. Plant height was decreased by increasing PPF. Maximum fresh weight and dry weight were shown under PPF of $250{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Thus PPF of $250\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was enough to produce quality potato transplants under air temperature, photoperiod, and relative humidity of $20^{\circ}C$, 16/8 h, and 70%, respectively. It was concluded that quality indices such as plant height, fresh weight and dry weight could be improved by illuminating of adequate PPF from artificial lighting sources.