• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.552-561
• /
• 2016

For the prediction of hydrologic phenomenon, predicting future land use change is a very important task. This study aimed to compare and analyze the two land use change models, CLUE-S and SLEUTH3-R. The analysis of two models were performed based on the MSR value such that the model with more reliable MSR value can be recommended as an appropriate land use change prediction model. The model performance was examined by applying to the Gapcheon A watershed. Land use map of the study area of 2007 obtained from the Ministry of Environment was compared with the predicted land use map obtained from each of the two models. The result from both models showed somewhat similar results. The MSR value obtained from CLUE-S was 0.564, while that from SLEUTH3-R was 0.586. However, when land use map of 2010 was compared with predicted land use map obtained from the two models in same manner, the MSR value obtained from CLUE-S' was 0.500 while that from SLEUTH3-R was decreased to 0.397, an approximately 32.3% decrease from previous value of 2007. Moreover, SLEUTH3-R showed more sensitivity in conversion of urban areas, as compared to other land use types. Therefore, for the prediction of future land use change, CLUE-S model is more reliable than SLEUTH3-R.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1369-1381
• /
• 2009

The simultaneous determination of residual pesticides was developed using a gas chromatography. In this study, a simple and reliable methodology was improved to detect 175 kinds of residual pesticides by a liquid-liquid extraction procedure, followed by chromatographic analysis by gas chromatography. The 175 kinds of residual pesticides was classified into 4 groups according to the chemical structure, column type, resolution and sensitivity. The soybean sample selected for recovery experiment was not detected any pesticides. The recovery rates were ranged from 70.6% to 119.7% in most pesticides. The relative standard deviation (RSD 0.3~5.6%) was lower than 5.6% in all cases. The limits of detection (LOD) was lower than the maximum residue levels established by Korean legislations. The method has been successfully applied to the analysis of approximately 130 real samples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1361-1368
• /
• 2009

This study attempts to present investment priorities and select industry for regional economic reinvigorating by analysing regional inter-industry of Chungchong area(including Chungnam and Chungbuk region) After the regional inter-industry table of Chungchong area has been made using a location quotient(LQ) method based on national inter-industry table of 2006 derived from national inter-industry table of 2003 using RAS method, various kind of impacts to Chungchong area are analysed. Manufacturing has the highest result in the result of production-inducing effect and value-added-inducing effect and hotels and restaurants has the highest result in employ-inducing effect. Sensitivity coefficient is highly analysed in mining and quarrying and influential coefficient is highly analysed in manufacturing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.337-352
• /
• 2023

In general, Rainfall-Runoff model parameter set is optimized using the entire data to calculate unique parameter set. However, Korea has a large precipitation deviation according to the season, and it is expected to even worsen due to climate change. Therefore, the need for hydrological data considering seasonal characteristics. In this study, we conducted regional sensitivity analysis(RSA) using the conceptual Rainfall-Runoff model, GR4J aimed at the Soyanggang dam basin, and clustered combining the RSA results with hydrometeorological data using Self-Organizing map(SOM). In order to consider the climate characteristics in parameter estimation, the data was divided based on clustering, and a calibration approach of the Rainfall-Runoff model was developed by comparing the objective functions of the Global Optimization method. The performance of calibration was evaluated by statistical techniques. As a result, it was confirmed that the model performance during the Cold period(November~April) with a relatively low flow rate was improved. This is expected to improve the performance and predictability of the hydrological model for areas that have a large precipitation deviation such as Monsoon climate.

• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1159-1165
• /
• 2003

The Carbon Bond Mechanism IV has been developed for use in urban- and regional-scale oxidant models. The photochemical mechanism, CBM4, contains extensive improvements to earlier carbon bond mechanisms in the chemical representations of aromatics, biogenic hydrocarbons, peroxyacetyl nitartes, and formaldehyde. Ozone is produced mainly by nitrogen oxides and hydrocarbon. By altering the initial concentrations of the mechanism, an analysis of the sensitivity of ozone concentrations to VOC/NO$\_$x/ ratios and VOC composition is conducted in this one-dimensional mechanism. Note that it is considered a chemical mechanism in order to understand the photochemical reactions within this mechanism. It analyzed the results of these simulations by applying a NO$\_$x/-sensitive and a VOC-sensitive regime. These sensitivity regimes are changed to match the relative contribution of VOC and NO$\_$x/ concentrations to ozone production in simulations of two sets.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.372-379
• /
• 2007

A high-performance liquid chromatography-electrospray ionization (HPLC-ESI) tandem MS was developed for the rapid and simultaneous determination of forbidden medicines in dietary supplements. Thirteen medicinal components such as PDE-5 inhibitors and their analogues, and the newly identified dimethylsildenafil and xanthoanthrafil, were included in this study. After tentative standardization of molecular ions in both polarities using thirteen references on the mass spectrometer, with ESI-continuous infusion via the syringe pump method, the relative intensity of the ions present in the resulting spectra was quantitatively compared. From the results, the ion mode was selected depending on each reference's characteristics. A HPLC method coupled with the ESI mode was developed considering the matrix effect and interference depending on the type of sample. The validation test of the developed method was followed by carrying out precision, accuracy, recovery, sensitivity and linearity, etc. The method showed sufficiently high sensitivity, reproducibility, and specificity, and produced 4 times faster results when compared with the existing HPLC/UV method for the determination of forbidden compounds in dietary supplements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.180-189
• /
• 2013

The objective of this paper is to analyze the profitability of expanding the high-speed internet network and provide the strategy and policy for the government and telecommunication providers to fill the information gaps in rural areas. First, we analyzed the situation where the accessibility of high-speed internet networks is deficient and reasons why it is slow to build the communication network infrastructure in the remote agricultural and fishing areas. Then economic analysis was performed to find out how much it cost to make it possible for every village of rural areas to access the high-speed internet network as well as sensitivity analysis.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.295-305
• /
• 2021

In this study, design charts for estimating consolidation settlement are proposed according to finite strain consolidation theory using a nonlinear constitutive relationship equation. Results of parametric sensitivity analysis shows that the final settlement, initial height, and initial void ratio exerted the greatest effect, and the coefficients of the void ratio-effective-stress. Proposed design charts were analyzed for three regions using a representative constitutive relationship equation that enables major dredged-reclaimed construction sites in Korea. The regional design charts can be calculated accurately for the final settlement because it is applied directly to the numerical analysis results, except for reading errors. A general design chart applicable to all marine clays is proposed through correlation analysis of the main parameters. A final self-weight consolidation settlement with various initial void ratios and initial height conditions should be estimated easily using the general design chart and constitutive relationship. The estimated final settlement using the general design chart is similar to the results of numerical analysis obtained using finite strain consolidation theory. Under an overburden pressure condition, design charts for estimating consolidation settlement are proposed for three regions in Korea.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.508-521
• /
• 2006

The results of environmental equity analysis vary dramatically depending on different methods used. The information and data available to the researcher are also often uncertain and imprecise in empirical studies. A sensitivity analysis approach was used too handle uncertainties and methodological inconsistencies in environmental equity analysis. This paper explores the sensitivity of environmental equity analysis to two spatial measures such as proximity and scale. Two experiments were implemented to evaluate the effects of two spatial measures on the environmental equity analysis using a combination of control and experimental factors. Fulton County, Georgia was selected as a case study area for these experiments. Two major data sets including demographic characteristics and toxic release inventory (TRI) database for the study area in 1990 were integrated into a GIS environment. Two statistical analyses such as independent samples t-test and coefficient of variation were performed to determine the environmental equity in the study area and to compare the relative variability in the socioeconomic characteristics of populations over different spatial measures. The findings from two experiments indicate that the outcomes of environmental equity analysis are slightly sensitive to the buffer distance used to determine the impact zones of TRI facilities, but not to the geographic scale used in the analysis. The findings also suggest that the consequences of these choices can alter spatially and statistically the results in environmental equity analysis.

• Ocean and Polar Research
• /
• v.43 no.3
• /
• pp.179-192
• /
• 2021

In this study, an integrated wave model from global to coastal scales was developed to improve the operational wave prediction performance of the Korean Meteorological Administration (KMA). In this system, the wave model was upgraded to the WaveWatch III version 6.07 with the improved parameterization of the source term. Considering the increased resolution of the wind input field and the introduction of the high-performance KMA 5^th Supercomputer, the spatial resolution of global and regional wave models has been doubled compared to the operational model. The physical processes and coefficients of the wave model were optimized for the current KMA global atmospheric forecasting system, the Korean Integrated Model (KIM), which is being operated since April 2020. Based on the sensitivity experiment results, the wind-wave growth parameter (β_max) for the global wave model was determined to be 1.33 with the lowest root mean square errors (RMSE). The value of β_max showed the lowest error when applied to regional/coastal wave models for the period of the typhoon season when strong winds occur. Applying the new system to the case of August 2020, the RMSE for the 48-hour significant wave height prediction was reduced by 13.4 to 17.7% compared to the existing KMA operating model. The new integrated wave prediction system plans to replace the KMA operating model after long-term verification.