• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.495-501
• /
• 2013

Objective: The purpose of this study was to survey of the subjective health status of the elderly farmer. Background: With increase of aged population, the health of the elderly farmer has become main concerns of the elderly in the rural community. For the effects of the factors related to quality of life, subjective health condition showed the largest influence. Method: The survey was conducted by 326 elderly farmers aged 50 and older in rural areas through structured questionnaires. Survey questionnaire consisted items of general characteristics, health-related life habits, levels of stress(SF-PWI), symptom of musculoskeletal diseases and general level of health(SF-36). For the data analysis, SPSS 19.0K was used, and analysis was conducted by using frequency, percentage, mean, and standard deviation. For the symptom prevalence of musculoskeletal disorders and comparison of average level of health, chi-square test and t-test were used. Results: The results of the study are as follows. It was shown that the symptom prevalence of musculoskeletal disorders had a significant difference in gender (p<0.01). Frequency analysis on presence of musculoskeletal symptoms in each part of body showed that leg/knee region was 28.1%, back region was 26.6%, shoulder region was 18.0%, arm/elbow region was 11.9%, hand/wrist region was 8.2% and neck region was 7.2%. According to comparison of average level of health, a social functioning were the highest as score 87.3, followed by mental health(65.6) and role limitation-emotional(65.5). Conclusion: Health promotion program for the elderly and female in the rural are needed. Application: The survey of the subjective health status of the elderly should be used for planning factors to make a health improvement plan in elderly farmer.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.689-701
• /
• 2010

The effects of high-resolution wind profiler (HWP) data on the wind distributions were evaluated in two different coastal areas during the study period (23-26 August, 2007), indicating weak-gradient flows. The analysis was performed using the Weather Research and Forecasting (WRF) model coupled with a three-dimensional variational (3DVAR) data assimilation system. For the comparison purpose, two coastal regions were selected as: a southwestern coastal (SWC) region characterized by a complex shoreline and a eastern coastal (EC) region surrounding a simple coastline and high mountains. The influence of data assimilation using the HWP data on the wind distributions in the SWC region was moderately higher than that of the EC region. In comparison between the wind speed and direction in the two coastal areas, the application of the HWP data contributed to improvement of the wind direction distribution in the SWC region and the wind strength in the EC region, respectively. This study suggests that the application of the HWP data exerts a large impact on the change in wind distributions over the sea and thus can contribute to the solution to lack of satellite and buoy data with their observational uncertainty.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.1
• /
• pp.11-17
• /
• 2002

This paper compares the difference between the village groves in the Jinan settlement region and the Hamyang settlment region in Honam and the Youngnam mountainous region. The results are as follows: Fifty-one village groves in the Jinan legion were found and 40 village groves were found in the Hamyang region. It was established that the village groves in the Jinan region of Honam province were conserved better than those of Hamyang region of Youngnam province. In the Jinan area, the village groves were principally found in the Jinan-eup and the Hamyang regions, primarily in Seosang-myun and Aneui-myun. So it was determined that the village groves were distributed inequitably in the two regions. In L / W ratio, the Jinan region is 3.6 and Hamyang region is 2.0 Jinan is 1.8 times greater than Hamyang. Therefore, it was concluded that Jinan is stronger than Hamyang in linear function of the village groves. Stone stooge for complementation function was found in 11 village groves in the Jinan region and 6 village groves in Hamyang. So the percentage of the remaining stone storage is 15-20 % of all village groves. Regarding grove makeup, the village gloves in Jinan region is deciduous forest principally. In contrast, the groves of Hamyang are principally coniferous forest. The dominant tree of the Jinan-gun region is Zelkova serrata, but in Hamyang it is Pinus densiflrora. By number, Hamyang region has two times the trees than Jinan region. In density of stand, the Hamyang region is 76.2% higher than Jinan region. In height and diameter of trees, the Jinan region is greater than the Hamyang region. It was identified that RSI of both region is 40%. So in density of trees, both region are sparse. This paper has a limit in ideiltiting the differences between Yolmg-nam ar\ulcorner Hnam village groves because comparative review only examined two regions.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.75-89
• /
• 2005

D. K. LEE, J. S. LEE, B. J. LEE, H. S. LEE, Y. J. KIM, S. B. PARK, J. P. JOO. Plantar foot pressure analysis during golf swing motion using plantar foot pressure measurement system. Korean Journal of Sport Biomechanics, Vol. 15, No. 1, pp. 75-89, 2005. In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Address acting, forces concentrated in rare foot regions and lateral foot of right foot. Back swing top acting, relatively high force occurred in medial forefoot region of left foot and forefoot region of right foot. Impact acting, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the lateral region and rarefoot region of left foot. 2. Forces were increased in address of right foot with clubs length increased. All clubs, back swing top acting, high force value observed in the lateral forefoot region of right foot. All clubs, in impact, high force value observed in the lateral rarefoot region of left foot and medial forefoot region of right foot. Finish acting, force concentration observed on the rarefoot region in driver and lateral foot region in iron on left foot. 3. Right foot forces distribution were increased in address, back swing top and left foot force distribution were increased in impact, finnish

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.187-192
• /
• 2003

The heat (mass) transfer characteristics in the tip-leakage flow region of a high-turning first-stage turbine rotor blade has been investigated by employing the naphthalene sublimation technique. The heat transfer data in the tip-leakage flow area for the tip clearance-to-span ratio, h/s, of 2.0% are compared with those in endwall three-dimensional flow region without tip clearance (h/s = 0.0 %). The result shows that the thermal load in the tip-leakage flow region for h/s = 2.0% is more severe than that in the endwall flow region for h/s = 0.0%. The thermal loads even at the leading and trailing edges for h/s = 2.0% are found larger than those for h/s = 0.0%. The tip-leakage flow results in heat transfer augmentations near the tip on both pressure and suction sides in comparison with the mid-span results.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.2
• /
• pp.110-114
• /
• 2015

This paper reports a novel object-detection technique in video sequences. The proposed algorithm consists of detection of objects in illuminated and occluded videos by using object features and a neural network technique. It consists of two functional modules: region-based object feature extraction and continuous detection of objects in video sequences with region features. This scheme is proposed as an enhancement of the Lowe's scale-invariant feature transform (SIFT) object detection method. This technique solved the high computation time problem of feature generation in the SIFT method. The improvement is achieved by region-based feature classification in the objects to be detected; optimal neural network-based feature reduction is presented in order to reduce the object region feature dataset with winner pixel estimation between the video frames of the video sequence. Simulation results show that the proposed scheme achieves better overall performance than other object detection techniques, and region-based feature detection is faster in comparison to other recent techniques.

• Korea journal of population studies
• /
• v.17 no.2
• /
• pp.1-20
• /
• 1994

The main purpose of this paper is to examine changes in internal migration patterns during 1960 - 1990 period, and to analyze population movement to and from the Capital Region. The overall mobility rate of the whole Korean population has heen increasing since the 1960s, and reached to 24.6% in 1985 - 90 period. The most interesting changes in the migration pattern is that Seoul lost its population through migration during 1985 - 90, mainly due to heavy outmigration to Kyonggi province. The analysis of characteristics of inmigrants to the Capital Region reveals that those moved to Seoul are more likely to be young, better educated, never married and engage in service sector in comparison with migrants moved to the suburban districts and the outlying Kyonggi province. However, on the whole migrants moved to the Capital Region are overrepresented in manufacturing sector, which suggests that more effective policy measures to control the growth of manufacturing sector in the Capital Region is called for.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.91-95
• /
• 2011

In this paper, we present an improved multi-scale gradient algorithm. The proposed algorithm works the effectively handling of both step and blurred edges. In the proposed algorithm, the image sharpening operator is sharpening the edges and contours of the objects. This operation gives an opportunity to get noise reduced image and step edged image. After that, multi-scale gradient operator works on noise reduced image in order to get a gradient image. The gradient image is segmented by watershed transform. The approach of region merging is used after watershed transform. The region merging is carried out according to the region area and region homogeneity. The region number of the proposed algorithm is 36% shorter than that of the existing algorithm because the proposed algorithm produces a few irrelevant regions. Moreover, the computational time of the proposed algorithm is relatively fast in comparison with the existing one.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.37-42
• /
• 2010

Plastic region tightening is widely used in critical bolted joints in internal combustion engines in order to reduce the engine weight by maximizing the use of load-carrying capacity of bolt. Mechanical behavior of bolt tightened in plastic region under external axial tensile load is investigated for various friction conditions using three dimensional finite element analysis. The behavior of bolt tightened in elastic region as well as that in tensile test are investigated for comparison. Tightening process is simulated by rotating the bolt in order to examine the friction effect realistically. It is revealed that the bolt tightened in plastic region can carry more external load until the joint is opened, and yields at lower bolt load than the bolt tightened in elastic region. The friction coefficient has effect on the yield load, but not on the load-carrying capacity. Moreover, the scatter in the bolt preload due to friction begins with plastic deformation of bolt in the angle tightening control, whereas it begins with the onset of tightening in the torque tightening control. The observations are interpreted with the residual torsional stress in the bolt generated during the tightening.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.47-52
• /
• 2007

Conventional pixel based region segmentation methods have problems of long processing time and incorrect region split on account of performing region split through comparison of neighboring pixels. In this paper, we propose the method which segments a large size of satellite image effectively using modified centroid linkage method. This method is a sort of region split and merge. The proposed method merges pixels and makes them as a new region through only two directional comparing the current positioning pixel with neighbor ones, if they are satisfied with given conditions. Therefore, this method has less comparing time than the cases of previous ones. The experimental result shows that the proposed method is very efficient because of having less processing time and more exact segmented regions than the previous ones.