• Journal of Periodontal and Implant Science
• /
• v.53 no.4
• /
• pp.306-317
• /
• 2023

Purpose: Biphasic calcium phosphate (BCP), a widely used biomaterial for bone regeneration, contains synthetic hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), the ratio of which can be adjusted to modulate the rate of degradation. The aim of this study was to evaluate the clinical and radiographic benefits of reconstructing peri-implant bone defects with a newly developed BCP consisting of 60% β-TCP and 40% HA compared to demineralized bovine bone mineral (DBBM). Methods: This prospective, multicenter, parallel, single-blind randomized controlled trial was conducted at the periodontology departments of 3 different dental hospitals. Changes in clinical (defect width and height) and radiographic (augmented horizontal bone thickness) parameters were measured between implant surgery with guided bone regeneration (GBR) and re-entry surgery. Postoperative discomfort (severity and duration of pain and swelling) and early soft-tissue wound healing (dehiscence and inflammation) were also assessed. Data were compared between the BCP (test) and DBBM (control) groups using the independent t-test and the χ² test. Results: Of the 53 cases included, 27 were in the test group and 26 were in the control group. After a healing period of 18 weeks, the full and mean resolution of buccal dehiscence defects were 59.3% (n=16) and 71.3% in the test group and 42.3% (n=11) and 57.9% in the control group, respectively. There were no significant differences between the groups in terms of the change in mean horizontal bone augmentation (test group: -0.50±0.66 mm vs. control groups: -0.66±0.83 mm, P=0.133), postoperative discomfort, or early wound healing. No adverse or fatal complications occurred in either group. Conclusions: The GBR procedure with the newly developed BCP showed favorable clinical, radiographic, postoperative discomfort-related, and early wound healing outcomes for peri-implant dehiscence defects that were similar to those for DBBM.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.279-285
• /
• 1996

The odontogenic keratocyst(OKC) was used of term and described some of clinical, radiological and microscopic features by Philipsen 1956. The microscopic finding of OKC is characterized by the production of keratin, Which sometimes fills the lumen and thinning of epithelium of cyst. The most clinical importance of OKC is its extraordinary recurrence rate owing to the incomplete removal of the cyst wall. The final diagnosis of OKC should be evaluated by histologic findings and follow-up of any case of OKC with annual roentgenograms and clinical evaluations is essential for at least five years after surgery. This article is report of 2 cases of large OKC involved both molar portion and symphysis of mandible with facial asymmetry, severe bone destruction and paresthesia of lower lip on clinically, roentgenographically. By the postoperative findings the patients showed normal regeneration of bone defect area without recurrence signs by panorama films after surgery.

• Journal of Periodontal and Implant Science
• /
• v.43 no.6
• /
• pp.262-268
• /
• 2013

The use of dental implants has become a mainstay of rehabilitative and restorative dentistry. With an impressive clinical success rate, there remain a few minor clinical issues with the use of implants such as peri-implant mucositis and peri-implantitis. The use of laser technology with implants has a fascinating breadth of applications, beginning from their precision manufacturing to clinical uses for surgical site preparation, reducing pain and inflammation, and promoting osseointegration and tissue regeneration. This latter aspect is the focus of this review, which outlines various studies of implants and laser therapy in animal models. The use of low level light therapy or photobiomodulation has demonstrated its efficacy in these studies. Besides more research studies to understand its molecular mechanisms, significant efforts are needed to standardize the clinical dosing and delivery protocols for laser therapy to ensure the maximal efficacy and safety of this potent clinical tool for photobiomodulation.

• Plant Resources
• /
• v.5 no.3
• /
• pp.176-180
• /
• 2002

This study was conducted to develop the clonal propagation technique through in vitro culture using by leaf sheath explants of Phalaenopsis grown in vitro. The highest frequency of protocorm-like body (PLB) formation was obtained when explants of leaf sheath were cultured on VW medium containing 30g/L sucrose, 500 mg/L activated charcoal, 150 mVL coconut water, 1 mg/L NAA, 1 mg/L 2ip and 2.5 g/L gelrite. The PLB formation rate of VW medium was highest followed by modified Hyponex medium, and lowest in MS medium. Plantlets induced from PLBs transferred to plastic pots including spagnum moss were well developed.

• Fibers and Polymers
• /
• v.7 no.2
• /
• pp.112-116
• /
• 2006

Caprolactam is the most important raw material for making Nylon 6 fibers and its quality directly determines the quality of Nylon. So it is necessary to study the techniques and methods to remove the colorful impurities from caprolactam. In this paper, the decolorization of caprolactam aqueous solution by anion exchange resins was studied and the decoloring abilities of five commercial resins were investigated. The regeneration of the resins was also studied, too. This study shows that the resin AMTX202 have excellent decoloring ability in the column experiment and that the decoloring efficiency is correlated with the volume of resins packed and is slightly affected by the flow rate and regenerating times. The fact that the resins can be regenerated and reused without affecting the efficiency of decolorization will decrease the cost of the treatment and operation in the industry. The adsorption of colored compounds with anion exchange resins in the packed columns seems to be technically feasible.

• Journal of Korean Society for Atmospheric Environment
• /
• v.6 no.2
• /
• pp.161-167
• /
• 1990

The reaction of sulfur dioxide with cupric oxide supported on zeolite was investigated over a temperature range of $250{\sim}450^{{\circ}C$. After the completion of the $SO_2$ removal reaction, the cupric sulfate produced was regenerated to copper by hydrogen or LPG. The experimental results showed that the removal efficiency of $SO_2$ was improved with temperature increase and with $SO_2$ inlet concentration decrease. The reaction of $SO_2$ with CuO/Zeolite was well explained by the shrinking unreacted core model using first order chemical reaction control and diffusion control. THe reaction rate constant and the effective diffusivity were respectively as follows: 1k (cm/s) = 2.519 exp[-10991 (cal/mol)/RT] $De(cm^2/s) = 2.06 \times 10^{-5} exp[-8380 (cal/mol)/RT]$

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.3
• /
• pp.223-230
• /
• 2011

The power cycle using ammonia-water mixture as a working fluid is a possible way to improve efficiency of the system of low-temperature source. In this work thermodynamic performance of the ammonia-water regenerative Rankine cycle with partial-boiling flow is analyzed for purpose of extracting maximum power from the source. Effects of the system parameters such as mass fraction of ammonia, turbine inlet pressure or ratio of partial-boiling flow on the system are parametrically investigated. Results show that the power output increases with the mass fraction of ammonia but has a maximum value with respect to the turbine inlet pressure, and is able to reach 22 kW per unit mass flow rate of source air at $180^{\circ}C$.

• Journal of Plant Biotechnology
• /
• v.41 no.1
• /
• pp.33-37
• /
• 2014

Lychnis wilfordii (Regel) Maxim is a rare and valued ornamental plant. Germination rate reached 46.6% when seeds were treated with $100mg{\cdot}l^{-1}$ GA (Gibberellic acid). The highest callus induction was observed in the leaf explants of the seedlings on MS medium containing specific concentrations of $0.5mg{\cdot}l^{-1}$ BA ($N^6$-benzyladenine) and $3.0mg{\cdot}l^{-1}$ NAA (a-naphthalene acetic acid). The adventitious shoot was formed in 97.3% of calli on 1/2 WPM (Woody Plant Medium) medium. Shoot elongation of in vitro propagated plantlets was no difference among various medium. The plantlets grew well after transferring to the pot. This in vitro propagation protocol should be useful for conservation of this endangered plant.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.237.3-238
• /
• 2003

Tissue engineering may be adequately defined as the science of persuading the body to regenerate or repair tissue that fail to regenerate or heal spontaneously. In the various techniques of cartilage tissue engineering, the use of 3-dimensional polymeric scaffolds implanted at a tissue defect site is usually involved. These scaffolds provided a framework for cells to attach, proliferate, and form extracellular matrix(ECM). The scaffolds may also serve as carriers for cells and/or growth factors. In the ideal case, scaffold absorb at a predefined rate so that the 3-dimensional space occupied by the initial scaffold is replaced by regenerated host tissue. (omitted)

• Clinical Pain
• /
• v.19 no.2
• /
• pp.59-63
• /
• 2020

Rotator cuff tear is often cited as a reason for shoulder pain and dysfunction in patients > 40 years of age. Surgical repair of rotator cuff tear is one of the most commonly performed orthopedic surgical procedures. Until now, the success rate of surgical repair for rotator cuff tear has not been satisfactory. Many factors influence the process of rotator cuff repair such as the presence of tendinosis and fatty infiltration, but the main factor is the difficulty in achieving healing at the tendon to bone interface. There is a clinical need for bioengineering approaches to promote regeneration of the native enthesis and reduce the poor outcomes after surgical repair. Toward this end, the design and fabrication of multiphasic or hierarchically structured scaffolds have received great attention. This manuscript deals with information on the tendon to bone interface and tries to find out why a multiphasic scaffold is necessary to reproduce it and considerations that need to be taken into to make an ideal scaffold.