• Journal of Institute of Convergence Technology
• /
• v.1 no.2
• /
• pp.37-42
• /
• 2011

The purpose of this research is to improve nitrogen removal efficiency in winter season through rise of water temperature of extraneous water by using solar energy which is estimated to have great potential among new regeneration energy and while operating Plug-Flow Reactor to improve nitrogen removal efficiency by selecting A/O process among sewage waste water treatment processes as the necessity of solving the problem of nitrogen removal efficiency according to reduced water temperature in winter season and strengthening of water quality criteria regarding discharged sewage waste water suggested in the research background. Summarizing the research result, supply of solar energy source improves the function outstandingly when removing nitrogen, (nitrogen removal rate before operating solar energy 55.4% ${\rightarrow}$ nitrogen removal rate after operating solar energy 84.1%).

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.639-644
• /
• 2009

This study presents the new idea of liquid desiccant system with extended surface to reduce the system size. The extended surface is inserted between vertical cooling/heating tubes to increase the mass transfer area, and the liquid desiccant flows through the tube wall and the extended surface. Mathematical models for heat and mass transfer between liquid desiccant and air stream at tube wall and extended surface are provided. Dimensionless design parameters governing heat and mass transfer phenomena around the tube and the extended surface are identifier, and dimensionless operating parameters depicting system operating condition including flow rate ratio between dehumidification/regeneration processes, and mass flow rate ratio between air stream and liquid desiccant are explained. The effects of the parameters on system performance are summarized.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.7
• /
• pp.329-334
• /
• 2014

This study indicated the possibility of energy regeneration from waste coolant heat, by using thermoelectric generation integrated with heat pipe. The internal combustion engine rejects more than 60% wasteful energy to the atmosphere by heat. The thermoelectric generator has recently been studied, to convert the energy from engine waste heat into electricity. For coolant waste heat recovery, a thermoelectric generator was investigated, to find out the possibility of vehicular application. Performance characteristics were conducted with various test conditions of coolant temperature, coolant mass flow rate, air temperature, and air velocity, with the thermoelectric generator installed either horizontally or vertically. Experimental results show that the electric power and conversion efficiency increases according to the temperature difference between the hot and cold side of the thermoelectric generator, and the coolant flow rate of the hot side heat exchanger. Performance improvement can be expected by optimizing the heat pipe design.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.5
• /
• pp.594-603
• /
• 2004

Several desiccant cooling systems have been developed in terms of cost and performance. In this study a fin-tube exchanger has been used for liquid desiccant dehumidification system. This dehumidifier has been designed to study the absorption characteristic of the aqueous triethylene glycol(TEG) solution which has the flow range from 20 to 50 LPM. The dehumidifier performance characteristics of working factor variables such as inlet solution flow rate, air flow rate, solution concentration and brine temperature have been analyzed. This dehumidifier has the ability to provide running while saving the latent heat load of total energy. The result of this experiment can provide useful data for hybrid air conditioning system.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.25-30
• /
• 2003

Several desiccant cooling systems have been developed in terms of cost and performance. In this study a fin-tube exchanger has been used for liquid desiccant dehumidification system. This dehumidifier has been designed to study the absorption characteristic of the aqueous triethylene glycol(TEG) solution which has the flow range from 20 to 50 LPM. The dehumidifier performance characteristic of working factor variables such as inlet solution flow rate, air flow rate, solution concentration, solution temperature, brine temperature, air temperature and inlet air relative humidity has been analyzed. The result of this experiment can provide useful data for hybrid air conditioning system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.2
• /
• pp.83-89
• /
• 1994

The reaction of sulfur dioxide with cupric oxide was investigated over a temperature range of 300-50$0^{\circ}C$, and the regenaration reaction was studied using cupric sulfate and hydrogen over a temperature range of 240-35$0^{\circ}C$ in a fixed bed reactor. The experimental results showed that the efficiencies for elimination and regenaration reactions were maximum at 45$0^{\circ}C$ and at 30$0^{\circ}C$ respectively. In both cases the experimental data could be interpreted properly by shrinking unreacted core model while the chemical reaction is rate controlling step. The reaction rate constants were determined to be 24.88 exp(-6724/RT) (cm/min) for elimination reaction, and 0.0165 exp(-2047/RT)(cm/min ) for regeneration reaction.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.71-76
• /
• 2006

Porous polymer monolithic columns were prepared by the direct free radical copolymerization of methacrylic acid and ethylene glycol dimethacrylate within the confines of a chromatographic column in the presence of toluene-dodecanol as a porogenic solvent. The separation characteristics of the monolithic columns were tested by a homologous series of xanthine derivatives, theophylline and caffeine. The effects of the polymerization mixture composition and polymerization condition, mobile phase composition, flow rate and temperature on the retention times and separation efficiencies were investigated. The results showed that the selection of correct porogenic solvents and appropriate polymerization conditions are crucial for the preparation of the monolithic stationary phases. The separation efficiency was only extremely weakly dependent on flow rate and temperatures. Hydrogen-bonding interaction played an important role in the retention and separation. Compared with conventional particle columns, the monolithic column exhibited good stability, ease of regeneration, high separation efficiency and fast analysis.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.458-464
• /
• 2023

In order to develop catechin patches for skin regeneration at wound sites, patches with varying concentrations of catechin and chitosan were manufactured. An optimal composition ratio was determined by adjusting the drug release rate and amount, to maximize efficiency. The catechin used in this study was extracted from green tea leaves using a solvent/ultrasonication method, and its characteristics were confirmed through Fourier transform-infrared spectroscopy (FT-IR) and high-performance liquid chromatography (HPLC) analyses. Patches were prepared with different concentrations of catechin and chitosan, and various properties were analyzed using techniques such as FT-IR, water contact angle analysis, and UV-Vis spectroscopy. It was observed that as the chitosan concentration increased, the release of catechin slowed down or almost ceased. A patch manufactured with 1.5 mg/cm² of catechin at a 1 % chitosan concentration exhibited a high initial release rate over 24 h and demonstrated cellular biocompatibility. Consequently, these patches, with tailored release characteristics based on the concentrations of chitosan and catechin, hold promise for use as drug delivery systems in wound healing applications.

• Fisheries and Aquatic Sciences
• /
• v.9 no.2
• /
• pp.75-82
• /
• 2006

We evaluated the utility of applying isozyme analysis and two tagging methods, visible implant fluorescent elastomer (VIE) injection and uropod-cutting, to monitor the effects of releasing nursery-reared fleshy prawn (Fenneropenaeus chinensis) into natural habitat in Korea. One hundred thousand farmed prawns (70 mm long) were tagged by clipping off the outer left uropod and injecting them with VIE. This marked seed population was released at Muchangpo, Korea, on 11 and 19 July 2002. Two months later, total catch and catch per unit effort (CPUE) at three locations (Hongwon, Muchangpo, and Anmyundo) were determined. Total catch and CPUE increased nearly 18% over the previous year in Hongwon and Muchangpo. The mixing rate, estimated by uropod regeneration pattern, was 0.33% at Hongwon, 0.53% at Muchangpo, and 0.21% at Anmyundo. The recapture rate was about 3.5%. Isozyme analysis confirmed that the mixing rate was highest at Muchangpo. Moreover, fleshy prawns from Muchangpo were genetically most related to the seed population, indicating that the released prawns had largely remained near the released site. We also confirmed that isozyme genes are valuable as genetic markers for qualitative analyses of a released seed population.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2015

The aim of the current study is to identify the dimerization and decomposition kinetics of the F-$D_M$ type. The regeneration of F-VS from $F_iF_j-D_M$ or the reversibility of the dimerizations were investigated. The order of real rate constants of the dimerization('$K_D{^{ij}}$) would seem to be similar to that of rate constants of a dimerization($K_D{^{ij}}$) for VS dyes at a given pH because of the constancy of the equilibrium constants($K_a{^j}$-value). The reverse reactions of the $D_M$ types are appeared to occur in two steps, the deprotonation of ${\alpha}$-carbon of the $D_M$ types and disproportionation. The ratio of the decomposition of the $D_M$ type to F-Hy and F-VS appears to be related with the ratio of $K_i/K_j$. Similarities were also found among various other reactions, including homo- and mixed dimerization. VS dyes undergoing fast hydrolysis have difficulty in forming a dimer. The higher the reactivity with cellulose or hydroxide ion, the smaller the dimerization. The easiness of the dimerization was thus found to be inversely proportional to the rate of hydrolysis.