• Journal of Korean Dental Science
• /
• v.9 no.1
• /
• pp.9-18
• /
• 2016

Purpose: Wnt signaling plays an essential role in the dental epithelium and mesenchyme during tooth morphogenesis. Deletion of the Wntless (Wls) gene in odontoblasts appears to reduce canonical Wnt activity, leading to inhibition of odontoblast maturation. However, it remains unclear if autonomous Wnt ligands are necessary for differentiation of dental pulp cells into odontoblast-like cells to induce reparative dentinogenesis, one of well-known feature of pulp repair to form tertiary dentin. Materials and Methods: To analyze the autonomous role of Wls for differentiation of dental pulp cells into odontoblast-like cells, we used primary dental pulp cells from unerupted molars of Wls-floxed allele mouse after infection with adenovirus for Cre recombinase expression to knockout the floxed Wls gene or control GFP expression. The differentiation of dental pulp cells into odontoblast-like cells was analyzed by quantitative real-time polymerase chain reaction. Result: Proliferation rate was significantly decreased in dental pulp cells with Cre expression for Wls knockout. The expression levels of Osterix (Osx), runt-related transcription factor 2 (Runx2), and nuclear factor I-C (Nfic) were all significantly decreased by 0.3-fold, 0.2-fold, and 0.3-fold respectively in dental pulp cells with Wls knockout. In addition, the expression levels of Bsp, Col1a1, Opn, and Alpl were significantly decreased by 0.7-fold, 0.3-fold, 0.8-fold, and 0.6-fold respectively in dental pulp cells with Wls knockout. Conclusion: Wnt ligands produced autonomously are necessary for proper proliferation and odontoblastic differentiation of mouse dental pulp cells toward further tertiary dentinogenesis.

• Journal of Periodontal and Implant Science
• /
• v.45 no.4
• /
• pp.128-135
• /
• 2015

Purpose: The aim of this study was to determine the effect of overlaying titanium mesh (TM) with an adjunctive collagen membrane (CM) for preserving the buccal bone when used in association with immediate implant placement in dogs. Methods: Immediate implant placements were performed in the mesial sockets of the third premolars of five dogs. At one site the TM was attached to the fixture with the aid of its own stabilizers and then covered by a CM (CM group), while the contralateral site received only TM (TM group). Biopsy specimens were retrieved for histologic and histomorphometric analyses after 16 weeks. Results: All samples exhibited pronounced buccal bone resorption, and a high rate of TM exposure was noted (in three and four cases of the five samples in each of the TM and CM groups, respectively). A dense fibrous tissue with little vascularity or cellularity had infiltrated through the pores of the TM irrespective of the presence of a CM. The distances between the fixture platform and the first bone-implant contact and the bone crest did not differ significantly between the TM and CM groups. Conclusions: Our study suggests that the additional use of a CM over TM does not offer added benefit for mucosal healing and buccal bone preservation.

• International Journal of Automotive Technology
• /
• v.8 no.1
• /
• pp.27-31
• /
• 2007

The number of vehicles employing diesel engines is rapidly rising. Accompanying this trend, application of an after-treatment system is strictly required as a result of reinforced exhaust regulations. The Diesel Particulate Filter (DPF) system is considered as the most efficient method to reduce particulate matter (PM), but the improvement of a regeneration performance at any engine operation point presents a considerable challenge by itself. Therefore, the present study evaluates the effect of fuel injection characteristics on regeneration performance in a DOC and a catalyzed CR-DPF system. The temperature distribution on the rear surface of the DOC and the exhaust gas emission were analyzed in accordance with fuel injection strategies and engine operating conditions. A temperature increase more than BPT of DPF system was obtained with a small amount fuel injection although the exhaust gas temperature was low and flow rate was high. This increase of temperature at the DPF inlet cause PM to oxidize completely by oxygen. In the case of multi-step injection, the abrupt temperature changes of DOC inlet didn't occur and THC slip also could not be observed. However, in the case of pulse type injection, the abrupt injection of much fuel results in the decrease of DOC inlet temperatures and the instantaneous slip of THC was observed.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2013

Teff grass is a warm season C4 annual grass that is used for dry hay, silage and haylage. We have developed a high-frequency plant regeneration system for teff grass via callus culture using mature seeds. It was revealed that mature seeds cultured on MS medium supplemented with 2 mg/l 2,4-D, 0.5 g/L proline, 0.5 g/L casamino acid and 3 g/L Gelrite under light condition produced the highest percentage of callus formation (91.9%). Addition of cytokinins (BA) at 0.0~0.5 mg/L to media containing 2 mg/l 2,4-D enhanced callus growth. The most suitable medium for plant regeneration from dehydrated calli was MS agar medium supplemented with 0.1 mg/l NAA, 1 mg/l BA, 0.5 g/L proline, 0.5 g/L casamino acid 3 g/L Gelrite which induced the highest percentage of calli forming shoots (47.0%). The shoots were rooted at the highest rate (100%) when transferred onto 1/2 MS medium and acclimated in greenhouse conditions.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.294-298
• /
• 2005

Absorption and regeneration characteristics of sorbent used in a fluidized-bed process to capture $CO_2$ from flue gas have been measured in a thermo gravimetric analyzer. A sorbent Sorb NH prepared for fluidized-bed process was faster than pure $Na_2CO_3$ in absorption and regeneration reaction rate. Activation energy of apparent absorption reaction of sorbent Sorb NH was estimated as -10,100 cal/g mol and that of pure $Na_2CO_3$ as -12,200 cal/g mol. Activation energy of apparent regeneration reaction of sorbent Sorb NH was estimated as about 12,050 cal/g mol and that of pure $Na_2CO_3$ as about 11,320 cal/g mol.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.484-495
• /
• 2015

PURPOSE. This study was to evaluate the effects of bacterial cellulose (BC) membranes as a barrier membrane on guided bone regeneration (GBR) in comparison with those of the resorbable collagen membranes. MATERIALS AND METHODS. BC membranes were fabricated using biomimetic technology. Surface properties were analyzed, Mechanical properties were measured, in vitro cell proliferation test were performed with NIH3T3 cells and in vivo study were performed with rat calvarial defect and histomorphometric analysis was done. The Mann-Whitney U test and the Wilcoxon signed rank test was used (${\alpha}<.05$). RESULTS. BC membrane showed significantly higher mechanical properties such as wet tensile strength than collagen membrane and represented a three-dimensional multilayered structure cross-linked by nano-fibers with 60 % porosity. In vitro study, cell adhesion and proliferation were observed on BC membrane. However, morphology of the cells was found to be less differentiated, and the cell proliferation rate was lower than those of the cells on collagen membrane. In vivo study, the grafted BC membrane did not induce inflammatory response, and maintained adequate space for bone regeneration. An amount of new bone formation in defect region loaded with BC membrane was significantly similar to that of collagen membrane application. CONCLUSION. BC membrane has potential to be used as a barrier membrane, and efficacy of the membrane on GBR is comparable to that of collagen membrane.

• Journal of Plant Biotechnology
• /
• v.29 no.1
• /
• pp.25-29
• /
• 2002

The study was carried out to establish an efficient protocol for shoot organogenesis and plant regeneration from stem explant cultures of Lycopersicon esculentum cv. Micro-Tom. The regenerated shoots obtained from stem explant cultures on solid MS medium containing the different concentrations of BAP. The highest number of shoots (5.3) per explant and shoot growth (0.7 cm) was obtained on MS medium containing 4.0 mg/L BA. The additions of AgNO$_3$ and putrescine substantially improved the shoot regeneration frequency, at the optimal concentration of 7 mg/L and 50 mg/L respectively. The regenerated shoots (about 1 cm) were normal and could be easily rooted with 0.1 mg/L IBA treatment. The rooted plants were hardened and transferred to vermiculite with a 92% survival rate where they grew normally.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.10a
• /
• pp.59-67
• /
• 2003

An efficient plant regeneration system was developed for Hordeum vulgare L. cv Baegdong - an important Korean cultivar. The protocol was based on a series of experiments involving the sizes of mature embryos and the culture media. The embryo size is found to be critical for the establishment of embryogenic callus. Embryos of 1.1-1.5 mm size showed a much higher ability to produce embryogenic callus capable of regenerating green plants. The auxins picloram and dicamba proved effective in inducing callus from mature embryos. $2.5\;m;I^{-1}$ dicamba and $4.0\;mg\;I^{-1}$ picloram in Murashige and Skoog's (MS) medium was optimum for the induction of primary callus. The induced primary callus was loose and friable which ultimately developed into creamy white and compact callus after transferring into the fresh medium. Multiple shoots were induced in the MS medium supplemented with $6.0\;g\;I^{-1}$ maltose, $20\;mg\;I^{-1}$ sorbitol, $0.5\;mg\;I^{-1}$ 2, 4-D and $1.0\;mg\;I^{-1}$ kinetin and the rate was 6.5 shoots per embryo. Regenerated plants were hardy and developed roots rapidly in the medium containing $0.2\;I^{-1}$ IBA. This efficient plant regeneration system provides a foundation for generating transgenic plants of this important barley cultivar.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.5
• /
• pp.285-293
• /
• 2019

Objectives: This study examined the effects of plasma-rich growth factors (PRGF) on accelerating bone regeneration/repair in fresh extraction sockets, and determined the quality and quantity of bone by assessing the bone density using cone-beam computed tomography (CBCT). Materials and Methods: Twenty patients, who had undergone bilateral extractions, were included in this study. In one extraction socket, PRGF was used and covered with an autologous fibrin plug. Nothing was used in the opposite side extraction socket. Thirteen weeks post extraction, the level of bone regeneration was evaluated on both sides with CBCT. Results: At the end of the study, the mean bone density according to the Hounsfield units (HU) in the control group and PRGF group was 500.05 HU (type III bone type) and 647.95 HU (type II bone type), respectively. Conclusion: This study recommends the use of PRGF in post extraction sites to accelerate the rate of bone regeneration and improve the quality of regenerated bone. The technique to process PRGF was simple compared to previously mentioned techniques used for platelet-rich plasma (PRP) preparation. PRP preparation requires a two-cycle centrifugation procedure, leading to a longer processing time.

• Journal of Ginseng Research
• /
• v.43 no.2
• /
• pp.226-235
• /
• 2019

Background: Panax ginseng is regarded as one of the best compounds for promoting health, and it has been used traditionally as a medicinal herb. Recently, Korean Red Ginseng (RG) has been shown to protect skin from aging and wrinkling; it can also relieve atopic dermatitis and allergy symptoms. This study aimed to evaluate RG's effects on the regeneration of the full-thickness skin wounds in rat. Methods: Full-thickness skin wounds were generated in rats, and then RG was administered either orally or topically. The wound-healing effects of RG were investigated by assessing wound size, mRNA expression patterns of genes related to wound healing, histological staining, and measurements of lipid, moisture, and elasticity in skin tissues. Results: The wound size was smaller, and tissue regeneration rate was faster in the RG-treated group than that in the control group on days 15 and 20 after initiating treatment. On postoperative day 20, skin lipid and moisture content had increased significantly in the RG-treated group. Significant increases in the gene expression levels of transforming growth $factor-{\beta}1$ and vascular endothelial growth factor were found in the RG group during the early stages of wound healing. Matrix metalloproteinase-1 and matrix metalloproteinase-9 showed significant increases in gene expression levels on day 20. Conclusion: The results suggested that RG may promote healing of full-thickness skin wounds in rats. They also provided basic insights into the effects of RG on skin regeneration, supporting its use as a dressing material for wound treatment and its development as a functional food.