• Title/Summary/Keyword: Refractoriness

Search Result 32, Processing Time 0.024 seconds

Basic Studies On Uljin Pottery Stones (울진도석에 관한 기초적인 연구)

  • 오일환
    • Journal of the Korean Ceramic Society
    • /
    • v.31 no.1
    • /
    • pp.47-54
    • /
    • 1994
  • The fundamental studies for exploit natural resources was investigated on Uljin pottery stones that estimated the amount of mineral deposits at 350 million tons. The results obtained are as follows; In the chemical composition of Uljin pottery stones the amount of Al2O3 are a little compared with other pottery stones and that of Na2O and K2O are a large. Fe2O3 content is lower than 0.3 wt%, thus whiteness of its is 83. The major minerals composition of Uljin pottery stones are quartz and feldspar mineral. The refractoriness (SK) of its is 14. Lattice constants of quartz in Uljin pottery stones are 4.8865 $\AA$ in a-axis and 5.3852 $\AA$ in c-axis. Lattice constants were expanded by HCl treatment and sintering. Microstructures of Uljin pottery stones are linked up with the crystal particles under 10 microns in size.

  • PDF

A Neurobiological Concept of Schizophrenia - Approach to Vulnerability -

  • Sato, Mitsumoto
    • Korean Journal of Biological Psychiatry
    • /
    • v.3 no.1
    • /
    • pp.37-45
    • /
    • 1996
  • Recent studies on long-term outcome of schizophrenia revealed that schizophrenic symptoms recover in more than 50%, while it remains severe in less than 20% after 20 years or more from the onset. Psychopharmacological studies indicate that 75% of remitted schizophrenics may recur within 2 years after discontinuation of maintenance pharmacotherapy. In addition, family studies revealed that schizophrenic decompensation may occur significantly more frequent in discharged patients with high expressed emotion family than in low expressed emotion family. These findings strongly support a clinical validity of stress-vulnerability concept of schizophrenia which open a new viewpoint to two central problems in schizophrenia treatment, i.e. psychotic relapses and chronification of the fist episode schizophrenia. Moreover, recent psychopathological studies argue that schizophrenic symptoms are manifestations of psychological reaction secondary to a primary cognitive impairment(neurobiological vulnerability), which is originated in neurobiological changes in the brain. Recent approaches to the vulnerability to schizophrenic symptoms or schizophrenic decompensation are reviewed.

  • PDF

Development of heat resistant body using Sanchung Kaolin and Jangsu gobdol sludge (산청고령토와 장수곱돌 슬러지를 사용한 내열소지 개발)

  • Kim, Sanggon
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.30 no.1
    • /
    • pp.27-32
    • /
    • 2020
  • The main cystal phases of traditional ceramics made of clay, quartz, and feldspar are mullite and cristobalite. Although mullite can provide strength to the ceramic body, it cannot be used for the heat resistant ceramics because the thermal expansion coefficient of it is relatively high as 5.3 × 10-6/℃. In this study, development of lightweight heat resistant ceramics was tried by producing cordierite phase, of which the thermal expansion coefficient is 2.6 × 10-6/℃, instead of forming mullite phase in the ceramic body by using Sanchung Kaolin and Jangsu gobdol sludge. It was concluded that ceramics having good heat resistant, bending strength, and refractoriness under load could be fabricated when 80 wt% of Sanchung Kaolin and 20 wt% of Jangsu gobdol sludge were used as raw materials. Also, the bulk specific gravity is 1.78, which is lighter than the existing Buncheong ware.

A Study on the Development of Refractories for the Iron , Steel and Cement Manufacturing (제철, 제강 및 시멘트 제조용 내화물의 개발에 관한 연구)

  • 김병호;변재동
    • Journal of the Korean Ceramic Society
    • /
    • v.17 no.2
    • /
    • pp.96-100
    • /
    • 1980
  • The castable refractory, CaO.$2Al_2O_3$ is a useful alumina cement for iron, steel and cement for iron, steel and cement industries, however it is difficult to produce CaO.$2Al_2O_3$because of its high melting point(180$0^{\circ}C$) and narrow firing range. In this study, the coprecipitation method was used to produce CaO.$2Al_2O_3$ for lower temperature firing . This method involved the titration of mixed solution of calicum and aluminate which extracted from domestic kaolin with $NH4_OH$ solution under blowing $CO_2$ gas into the solution. The coprecipitate and its clacined products were analyzed by X-ray diffraction and DTA. The calcined products fired between 400 and 90$0^{\circ}C$ were amorphous, but at 100$0^{\circ}C$ the coprecipitate was converted into one compound, CaO$2Al_2O_3$. From those experimental results, it was found that we could synthesizze CaO.$2Al_2O_3$ at about 100$0^{\circ}C$ which is lower than conventional firing temperature by around 80$0^{\circ}C$. The refractoriness of this alumina cement was SK 34 and the compressive strength ( 1 day) was about 250kg/$\textrm{cm}^2$.

  • PDF

The Utilization of Yun Chun Andalusite as a Raw Material for High Alumina Refractories(III) -Effect of Impurities on the Mulltization- (고 알루미나질 내화물 원료로서 연천산 홍주석의 이용에 관한 연구(III) -홍주석의 물라이트화에 미치는 불순물의 영향-)

  • Ahn, Young-Pil;Choi, Long
    • Journal of the Korean Ceramic Society
    • /
    • v.11 no.3
    • /
    • pp.27-32
    • /
    • 1974
  • The effect of impurities of andalusite on the morphology of the crystallization of mullite was investigated. The raw, concentrated and purified andalusite were fired at 145$0^{\circ}C$. and 150$0^{\circ}C$. Each of three grades of andalusite was examined in a scanning electron microscope, X-ray diffractometer and etc. The raw andalusite showed deeply etched textures and prismatic crystals which are estimated to be an average of 2.5u in width and 15u in length. Concentrated andalusite showed poorly formed and elongated prismatic crystals. Purified andalusite showed condensed needle-like crystals which are estimated to be an average of 0.4$\mu$ in width and 2.0$\mu$ in length, but at the boundary of the original andalusite grain, prismatic crystals were seen. It is supposed that the purified andalusite is able to utilize as a raw material for high alumina refractories with refractoriness S.K. 38.

  • PDF

Vesicular Stomatitis Virus G Glycoprotein and ATRA Enhanced Bystander Killing of Chemoresistant Leukemic Cells by Herpes Simplex Virus Thymidine Kinase/Ganciclovir

  • Hu, Chenxi;Chen, Zheng;Zhao, Wenjun;Wei, Lirong;Zheng, Yanwen;He, Chao;Zeng, Yan;Yin, Bin
    • Biomolecules & Therapeutics
    • /
    • v.22 no.2
    • /
    • pp.114-121
    • /
    • 2014
  • Refractoriness of acute myeloid leukemia (AML) cells to chemotherapeutics represents a major clinical barrier. Suicide gene therapy for cancer has been attractive but with limited clinical efficacy. In this study, we investigated the potential application of herpes simplex virus thymidine kinase/ganciclovir (HSV-TK/GCV) based system to inhibit chemoresistant AML cells. We first generated Ara-C resistant K562 cells and doxorubicin-resistant THP-1 cells. We found that the HSV-TK/GCV anticancer system suppressed drug resistant leukemic cells in culture. Chemoresistant AML cell lines displayed similar sensitivity to HSV-TK/GCV. Moreover, HSV-TK/GCV killing of leukemic cells was augmented to a mild but significant extent by all-trans retinoic acid (ATRA) with concomitant upregulation of Connexin 43, a major component of gap junctions. Interestingly, HSV-TK/GCV killing was enhanced by expression of vesicular stomatitis virus G glycoprotein (VSV-G), a fusogenic membrane protein, which also increased leukemic cell fusion. Co-culture resistant cells expressing HSV-TK and cells stably transduced with VSV-G showed that expression of VSV-G could promote the bystander killing effect of HSV-TK/GCV. Furthermore, combination of HSV-TK/GCV with VSV-G plus ATRA produced more pronounced antileukemia effect. These results suggest that the HSV-TK/GCV system in combination with fusogenic membrane proteins and/or ATRA could provide a strategy to mitigate the chemoresistance of AML.

Diagnostic characteristics of supplemental laboratory criteria for incomplete Kawasaki disease in children with complete Kawasaki disease

  • Jun, Hyun Ok;Yu, Jeong Jin;Kang, So Yeon;Seo, Chang Deok;Baek, Jae Suk;Kim, Young-Hwue;Ko, Jae-Kon
    • Clinical and Experimental Pediatrics
    • /
    • v.58 no.10
    • /
    • pp.369-373
    • /
    • 2015
  • Purpose: In 2004, the American Heart Association (AHA) had published an algorithm for the diagnosis of incomplete Kawasaki disease (KD). The aim of the present study was to investigate characteristics of supplemental laboratory criteria in this algorithm. Methods: We retrospectively examined the medical records of 355 patients with KD who were treated with intravenous immunoglobulin (IVIG) during the acute phase of the disease. Laboratory data were obtained before the initial IVIG administration and up to 10 days after fever onset. In 106 patients, laboratory testing was performed more than twice. Results: The AHA supplemental laboratory criteria were fulfilled in 90 patients (25.4%), and the frequency of laboratory examination (odds ratio [OR], 1.981; 95% confidence interval [CI], 1.391-2.821; P<0.001) was a significant predictor of it. The fulfillment of AHA supplemental laboratory criteria was significantly associated with refractoriness to the initial IVIG administration (OR, 2.388; 95% CI, 1.182-4.826; P=0.013) and dilatation of coronary arteries (OR, 2.776; 95% CI, 1.519-5.074; P=0.001). Conclusion: Repeated laboratory testing increased the rate of fulfillment of the AHA supplemental laboratory criteria in children with KD.

Normal data on axonal excitability in Koreans

  • Lee, Ju Young;Yu, Jin Hyeok;Pyun, So Young;Ryu, Sanghyo;Bae, Jong Seok
    • Annals of Clinical Neurophysiology
    • /
    • v.19 no.1
    • /
    • pp.34-39
    • /
    • 2017
  • Background: Automated nerve excitability testing is used to assess various peripheral neuropathies and motor neuron diseases. Comparing these excitability parameters with normal data provides information regarding the axonal excitability properties and ion biophysics in diseased axons. This study measured and compared normal values of axonal excitability parameters in both the distal motor and sensory axons of normal Koreans. Methods: The axonal excitability properties of 50 distal median motor axons and 30 distal median sensory axons were measured. An automated nerve excitability test was performed using the QTRACW threshold-tracking software (Institute of Neurology, University College London, London, UK) with the TRONDF multiple excitability recording protocol. Each parameter of stimulus-response curves, threshold electrotonus, current-voltage relationship, and recovery cycle was measured and calculated. Results: Our Korean normal data on axonal excitability showed ranges of values and characteristics similar to previous reports from other countries. We also reaffirmed that there exist characteristic differences in excitability properties between motor and sensory axons: compared to motor axons, sensory axons showed an increased strength-duration time constant, more prominent changes in threshold to hyperpolarizing threshold electrotonus (TE) and less prominent changes in threshold to depolarizing TE, and more prominent refractoriness and less prominent subexcitability and superexcitability. Conclusions: We report normal data on axonal excitability in Koreans. These data can be used to compare various pathological conditions in peripheral nerve axons such as peripheral neuropathies and motor neuron disease.

Characterization of Ca2+-Dependent Protein-Protein Interactions within the Ca2+ Release Units of Cardiac Sarcoplasmic Reticulum

  • Rani, Shilpa;Park, Chang Sik;Sreenivasaiah, Pradeep Kumar;Kim, Do Han
    • Molecules and Cells
    • /
    • v.39 no.2
    • /
    • pp.149-155
    • /
    • 2016
  • In the heart, excitation-contraction (E-C) coupling is mediated by $Ca^{2+}$ release from sarcoplasmic reticulum (SR) through the interactions of proteins forming the $Ca^{2+}$ release unit (CRU). Among them, calsequestrin (CSQ) and histidine-rich $Ca^{2+}$ binding protein (HRC) are known to bind the charged luminal region of triadin (TRN) and thus directly or indirectly regulate ryanodine receptor 2 (RyR2) activity. However, the mechanisms of CSQ and HRC mediated regulation of RyR2 activity through TRN have remained unclear. We first examined the minimal KEKE motif of TRN involved in the interactions with CSQ2, HRC and RyR2 using TRN deletion mutants and in vitro binding assays. The results showed that CSQ2, HRC and RyR2 share the same KEKE motif region on the distal part of TRN (aa 202-231). Second, in vitro binding assays were conducted to examine the $Ca^{2+}$ dependence of protein-protein interactions (PPI). The results showed that TRN-HRC interaction had a bell-shaped $Ca^{2+}$ dependence, which peaked at pCa4, whereas TRN-CSQ2 or TRN-RyR2 interaction did not show such $Ca^{2+}$ dependence pattern. Third, competitive binding was conducted to examine whether CSQ2, HRC, or RyR2 affects the TRN-HRC or TRN-CSQ2 binding at pCa4. Among them, only CSQ2 or RyR2 competitively inhibited TRN-HRC binding, suggesting that HRC can confer functional refractoriness to CRU, which could be beneficial for reloading of $Ca^{2+}$ into SR at intermediate $Ca^{2+}$ concentrations.

A Study on Unburned Refractory for Ladle -Especially for Sling mass- (부소성 Ladle용 내화물에 관한 연구 -Sling mass의 특성을 중심으로-)

  • 박금철;한문희
    • Journal of the Korean Ceramic Society
    • /
    • v.15 no.4
    • /
    • pp.213-223
    • /
    • 1978
  • The purpsoe of this study was to produce domestic stamping materials; sling mass which could be used as unburned refractory for iron melt'ladle. Batch compositions were based on Belgian Ladelite; mineral compositions were composed of 84 wt% of quartz and 16 wt% of clay, and particle sizes were divided into 12 wt% of 1410/297㎛, 18wt% 297/149㎛, 20wt% of 149/74㎛, 11wt% 74/44㎛ and 39wt% 44㎛ under. The effect of variable batch compositions were also investigated such as substitution of pyrophylite or industrial grade alumina for quartz and of zircon for portion of quartz and clay, increase of clay and addition on sericite. Samples were pressed at 100kg/㎠ with 7.4wt% of water or 7.4wt% of 4 wt% PVA solution. Dried and Fired properties of samples such as linear shrinkage, apparent porosity, modulus of rupture, refractoriness and corrosion resistance to blast furnace slag were investigated. The results are summarized as follows. 1. Dried samples are shrinked, but fired at 700-1400℃ expanded. Samples fired at 700-1000℃ and 1200-1400℃ tended to expand with incresing of firing temperature, but fired at 1000-1200℃ tended to shrink with increase of firing temperature. 2. Apparent porosity of samples fired at 700℃ is increased, but fired at 1200-1400℃ decreased with increasing of firing temperature. 3. Modulus of rupture of samples fired at 700℃ is decreased, but fired at above 700℃ increased with increasment of firing temperature. 4. Dried samples with 7.4 wt% of 4 wt% PVA solution better improve modulus of rupture than with 7.4 wt% of water, but the firing strength of the sampels fired at 700-1000℃ is showed reversely. 5. In quartz-clay system, mineral phases of samples fired at above 1200℃ are consisted of α-quartz, α-cristobalite and mullite. Respectively as firing temperature was rising up, intensity of α-cristobalite and mullite is in creased. 6. Quartz-Kibushi clay system, Kimcheun quartz(substitutuion of portion of industrial grade alumina for quartz) Hampyeung clay system and pyrophyllite-clay system are better in corrosion resistance to blast furnace slag than burned pyrophyllite brick. 7. 84 wt% of pyrophyllite-16wt% of clay system is superior in modulus of rupture and corrosion resistance to blast furnace slag to 84 wt% of quartz-16 wt% of clay system.

  • PDF