• 한국안광학회지
• /
• 제8권2호
• /
• pp.57-63
• /
• 2003

본 연구에서는 안경렌즈의 전면굴절력, 굴절률, 그리고 중심 두께의 변화에 따라 상측정점초점면에 맺는 착락원 직경 변화를 조사하기 위해 Code V와 LOSA 2.0 프로그램을 사용하였으며, 상측정점굴절력이 -4.00D이고 직경이 70 mm인 근시교정용 안경렌즈를 고려하였다. 또한 안경렌즈의 전면 굴절력은 0~10D, 중심 두께는 1.1~2.0mm 그리고 굴절률은 $n_d$ = 1.498, 1.523, 1.586, 1.60인 경우를 각각 고려하였다. 안경렌즈의 전면굴절력이 증가할수록 상측정점초점면에서 맺는 착락원 직경의 크기는 급격하게 증가하였다. 또한 안경렌즈의 굴절률이 증가한 경우에 상측정점초평면에 맺는 착락원 직경의 크기는 감소하였으며, 전면굴절력의 변화에 따른 착락원 직경의 크기 변화는 작았다. 안경렌즈의 중심 두께가 증가할수록 상측정점초평면에 맺는 착락원 직경 크기에는 거의 영향이 없지만 안경렌즈의 가장자리의 두께는 증가하였다. 이러한 결과로부터 구면렌즈의 경우에는 전면굴절력이 작고, 굴절률이 클수록 상측정점초평면에서 더 좋은 결상을 하고 있음을 알 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.529-530
• /
• 2007

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.435-436
• /
• 2006

• 대한수학회지
• /
• 제38권4호
• /
• pp.711-722
• /
• 2001

We survey recent results on the inverse kinematic problem arising in geophysics. The question is whether one can determine the sound speed (index of refraction) of a medium by measuring the travel times of the corresponding ray paths. We emphasize the anisotrpic case.

• 대한전자공학회논문지TC
• /
• 제41권8호
• /
• pp.131-137
• /
• 2004

본 논문에서는 레이더 빔의 이상 전파를 유발시키는 기상 조건을 규명한다. 과대 굴절이나 덕트를 발생시키는 기상 조건의 분석을 위하여 2000년부터 3년간 관측된 한반도의 서해와 남해의 기상 데이터를 이용한다. 고도의 증가에 따른 대기 굴절지수를 계산하고, 굴절 지수가 매우 낮은 고도에서의 기온과 습도의 변화를 고찰한다. 비정상적인 전파에 의한 레이더 에코는 대기 굴절 지수가 -150/km 인 고도에서 나타났으며, 그 고도에서는 급격한 습도의 감소와 함께 기온 역전 현상이 수반되었다.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.18-23
• /
• 2019

The oil immersion method can be used to create objective lenses with long working distances without sacrificing the focusing resolution for laser processing. In this study, a space in which air or oil can be filled was formed in the middle of a lens for analyzing the optical properties of a liquid-oil immersion lens. As the refractive media, air and oils of different refractive index values (1.2 and 1.5, respectively) were used. A simulation was conducted in the ZEMAX software environment using the ray-tracing technique, and the performance of the oil immersion lens was verified by determining its image distortion and focal length (FL) in each medium. In the case of air, the calculated FL was 0.813 mm, whereas the imaged FLs were 1.594 mm and 8.126 mm when the refraction indices were 1.2 and 1.5, respectively. The FL of an oil immersion lens could be increased considerably. In terms of image distortion, the oil immersion lens exhibited little distortion at the center in all cases, but different degrees of image distortion were observed at different points away from the center depending on the refraction index degree.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.281-281
• /
• 2010

Very low refractive index (<1.4) materials have been proved to be the key factor improving the performance of various optical components, such as reflectors, filters, photonic crystals, LEDs, and solar cell. Highly porous SiO2 are logically designed for ultralow refractive index materials because of the direct relation between porosity and index of refraction. Among them, ordered macroporous SiO2 is of potential material since their theoretically low refractive index ~1.10. However, in the conventional synthesis of ordered macroporous SiO2, the time required for the crystallization of organic nanoparticles, such as polystyrene (PS), from colloidal solution into well ordered template is typical long (several days for 1 cm substrate) due to the low interaction between particles and particle - substrate. In this study, polystyrene - polyacrylic acid (PS-AA) nanoparticles synthesized by miniemulsion polymerization method have hydrophilic polyacrylic acid tails on the surface of particles which increase the interaction between particle and with substrate giving rise to the formation of PS-AA film by simply spin - coating method. Less ordered with controlled thickness films of PS-AA on silicon wafer were successfully fabricated by changing the spinning speed or concentration of colloidal solution, as confirmed by FE-SEM. Based on these template films, a series of macroporous SiO2 films whose thicknesses varied from 300nm to ~1000nm were fabricated either by conventional sol - gel infiltration or gas phase deposition followed by thermal removal of organic template. Formations of SiO2 films consist of interconnected air balls with size ~100 nm were confirmed by FE-SEM and TEM. These highly porous SiO2 show very low refractive indices (<1.18) over a wide range of wavelength (from 200 to 1000nm) as shown by SE measurement. Refraction indices of SiO2 films at 633nm reported here are of ~1.10 which, to our best knowledge, are among the lowest values having been announced.

• 한국정밀공학회지
• /
• 제26권12호
• /
• pp.62-68
• /
• 2009

In this paper, we investigate a new method to measure the thickness of thin transparent objects utilizing a step index multi-mode optical fiber sensor. The method mainly depends on the refraction rate of transparent target, the diameter of optical fibers and the distance to reflector. We confirmed the effects of these parameters through the experimental verification tests. The comparison between the theoretical vs. analytical results shows good agreements with each other. The proposed model also enables users to measure the thickness of thin transparent objects without considering the reflection from the target. This approach provides simple, cost-effective and non-contact solutions to measure the thickness.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.197-202
• /
• 2005

An aspheric lens is one of a key point optical element in the optical industry. The feature of an aspheric lens is not to have the spherical aberration. An aspheric lens is also essential element for high-precision and light-weight in the optical machine. Generally it have been used in a tailor progression an aspheric lens modelling much. In this study we applied a lay back-tracer using a index of refraction to draw a creative aspheric lens. Also we developed the automatic design program for aspheric lens. We manufactured the aspheric lens and executed a comparison experiment for refraction situation of shape and straightness experiment to inspect the drawn aspheric lens in this study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.223-223
• /
• 2009

In this paper, designed and simulated Power Splitter (PS) integrated Mach-Zehnder interferometer (MZI) based planar type optical waveguide devices (which is called here a PS-MZI). The PS-MZI optical waveguide sensor was preceded by a Y-junction, which splits the input power between the sensor, and a reference branch, to minimize the effect of optical power variations. The PS-MZI optical waveguide sensor induced changing phases of the incident beam, which had fallen upon the waveguide through computer simulation, according to the small changes in the index of refraction, thus beam intensity was changed. The waveguide were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The fabrication of PS-MZI optical waveguide sensor was performed by a conventional planar lightwave circuit (PLC) fabrication process. The PS-MZI optical waveguide that was fabricated to be applied as a biosensor revealed a low insertion loss and a low polarization-dependent loss. After having etched the over-clad at the sensor part in the MZI optical waveguide that was fabricated, Ti deposition was made on the adhesion layer, and then Au thin-film deposition was carried out thereon. In addition, its optical properties were measured by having changed the index of refraction oil at the sensing part of the MZI. To apply the planar type PS-MZI optical waveguide as a biosensor, a detection test for Staphylococcus aureus was conducted according to changes in concentration, having adopted Ti-alkoxide as ligand. The detection result of the S. aureus by the PS-MZI optical waveguide sensor was possible to the level of $10^1$ CFU/ml.