• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.575-586
• /
• 2020

In this study, a two-dimensional hydraulic model test was conducted to examine the hydraulic phenomena that occur around the seawall when wave and wind coexist. Based on recent seawall repair and reinforcement examples, the experimental section was constructed under the condition of installing wave dissipation blocks on the safety surface of four different representative seawalls. Water level fluctuation, reflection, overtopping and wave pressure characteristics according to external force change were reviewed. It was confirmed that the top concrete shape of the seawall is the most important factor of the hydraulic characteristics that appear in front of the seawall, and the tendency is more pronounced when wind acts. Even in the case of vertical type seawall, when wind of 3 m/s~5 m/s occurs, the amount of overtopping increases to about 5%~12%. In the case of wave pressure, it was confirmed from the experimental results that the value increased from about 1.5 to 2.2 times in front of the top of concrete block. In addition, it was confirmed that when the shape of the seawall was different, the range of change in the hydraulic characteristics appeared larger. Therefore, when designing a seawall of a new shape, a more detailed review of the hydraulic characteristics should be accompanied based on these experimental results.

• International Journal of Computer Science & Network Security
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2022

Modern production requires production staff who have design competence, experience and skills to work in various types of work integrated into professional activities. Possession of digital design methods significantly expands the opportunities for professional activities of qualified workers. The purpose of our study was to study the impact of pedagogical conditions on the formation of design competence of future qualified workers in a group work. We have identified a set of pedagogical conditions that promote the development of professionally oriented artistic and technical creativity of workers in the conditions of curricular and extracurricular activities, which include motivational-target, procedural-semantic, organizational-technological, and subject-oriented. It is shown that the formation of design competence is determined by motivational, informational-active and reflection criteria, which are aimed at motivational-value, cognitive, operational-active, creative, social and emotional components of this competence. The methodology of the research is highlighted, which includes the use of the following methods: determination of the personality's motivational sphere in order to identify strong and weak motives of students activity; multiple intelligence to identify students talents in the direction of practical intelligence, which is important for design competence; determining the level of creative activity to identify manifestations of students creative abilities; identifying the type of students innovative thinking in order to develop motivation for success; factor-criterion model, developed on the basis of a qualimetric approach, which is used to identify the level of design competence formation in accordance with its components. The results of the study showed that the creation of separate pedagogical conditions in the institution of vocational education and training (VET) had a positive impact on the development of design competence, which shows the potential of artistic and technical design in the development of professional creativity of future qualified workers taking into account the environmental approach.

• Journal of the Korean Regional Science Association
• /
• v.39 no.3
• /
• pp.13-34
• /
• 2023

Jeju is making multifaceted efforts to foster and attract businesses in order to increase its GRDP, which is only at the level of 1% nationwide. A firm's choice of location selection is such a significant decision that it can affect the growth of the firm. The concentration of firm locations in one region means that the characteristics of the region conduce to corporate profit maximization. Therefore, the analysis of the characteristics of regions preferred by firms and the reflection of the results thereof in policies for attracting firms will be helpful in inducing regional innovation and development. This study investigates the distribution of firm locations in Jeju, and analyzes the effects of regional characteristics on the determination of firm location by using the conditional logit model. The analysis results indicate that Jeju has various kinds of firms concentrated, regardless of the industry type, and a large economically active population in thinly populated areas. Additionally, firms in the knowledge-based industry tend to locate in areas where more firms in the same field are located in Jeju. This study is significant in that it is the basic analysis of the determinants of firm location in Jeju, which has never carried out, for the purpose of establishing policies for firm and industry promotion and local development in Jeju.

• The Korean Journal of Coaching Psychology
• /
• v.5 no.2
• /
• pp.25-51
• /
• 2021

The purpose of this study is to deeply explore the communication process with team members perceived by team leader. To this end, in-depth interviews were conducted with 10 team leaders, and analyzed according to the grounded theory research method procedure suggested by Strauss and Corbin. As a results, a total of 51 concepts, 17 subcategories, and 8 categories were derived. As a causal condition, the concept of 'contemplating and reinterpreting communication necessary for the organization' was derived, and the central phenomenon was 'intentional effort made in parallel with work and private conversations'. The contextual condition was 'recognizing the need to cope with environmental changes', and the mediating condition was 'self-reflection and self-coaching time' was derived. The action/interaction strategy was conceptualized as a communication process with task-oriented coping, conflict resolution coping, and relationship promotion coping, and was confirmed as 'recognizing virtuous cycle communication within the organization' as a result of interaction with the central phenomenon. As a result of analysis of the team leader's communication process, the effort stage, approach stage, coping stage, and cycle stage were shown. As a result of the type analysis, task-oriented coping was a facilitator, conflict resolution coping was a supporter, and relationship promotion coping was a considerate. This study is an empirical study on how the corporate team leader perceives and expresses communication in the relationship with the team members.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.158-170
• /
• 2022

The purpose of this study is to analyze class satisfaction with peer evaluation in Collaborative Learning-based classes. For collaborative learning-based classes, problem-based learning and project-based learning were selected. Educational implications were derived by designing Instructional procedures of Collaborative Learning-based classes, Peer evaluation types and questionnaire design, Peer evaluation progress of Collaborative Learning-based classes, Class satisfaction research and analysis In Collaborative Learning-based classes. The subjects of the study were participants in Collaborative Learning-based classes selected as problem-based learning and project-based classes. For class satisfaction with peer evaluation in Collaborative Learning-based classes, a survey was conducted on 168 participants A University in Korea. The research tool was designed as Learning procedures for peer evaluation Collaborative Learning-based classes is Team Building, Plan to the Task, To do Task, Mid-check on task, Task completion, Presentation & Evaluation, Reflection & Self-Evaluation. The content validity of items was confirmed by CVR of 12 experts. In the research results, the average class satisfaction of peer evaluation is 4.05(SD=91), followed by class concentration, diligence, voluntary, learning atmosphere. As a result of t-testing the difference in class type between collaborate learning-based classes, the satisfaction of PBL was higher than that of PjBL and a statistically significant difference was observed. The result of this study have significance in providing implications for class design and operation for the application and expansion of peer evaluation in higher education. However, there is a limit to generalization as a result of research using convenience.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.57-79
• /
• 1993

Chuncheon nephrite, which was formed by the polymetasomatic alteration of dolomitic marble, can be classified into pale green, green, dark green, and grey types on the basis of their occurrence, mineralogical and textural characteristics. The nephrites consist obiefly of fibrous or hairlike(length/width ratio>10) cryptocrystalline(crystal width < $2{\mu}m$) tremolite, and include less amounts of micro-crystalline diopside, calcite, clinochlore, and sphene as impurities. The oriented and rather curved crystal aggregate, of nephritic tremolite are densely interwoven, resulting in a massive-fibrous texture which may explain the characteristic toughness of nephritic jade. The characteristic greenish color of the nephrite may be preferably related to Fe rather than Cr and Ni. However, the variation of color and tint in the Chuncheon nephrite also depends on the mineralogical and textural differences such as crystallinity, texture, and impurities. The chemical composition of the nephritic tremolite is not stoichiometric and rather dispersed especially in the abundances of Al, Mg, and Ca. Al content and Mg/Ca ratio for the nephritic tremolite are slightly increased with deepening in greenish color of the nephrite. Fe content in the nephritic tremolite is generally very low, but comparatively richer in the dark green nephrite. In nephritic tremolite, wide-chain pyriboles are irregularly intervened between normal double chains, forming a chain-width disorder. Most nephritic tremolites in the Chuncheon nephrite show various type of chain-width defects such as triple chain(jimthompsonite), quintuple chain (chesterite), or sometimes quadruple chain in HRTEM observations. The degree of chain-width disorder in the nephritic tremolite tends to increase with deepening in greenish color. Triple chain is the most common type, and quadruple chain is rarely observed only in the grey nephrite. The presence of pyribole structure in the nephritic tremolite is closely related to the increase of Al content and Mg/Ca ratio, a rather dispersive chemical composition, a decrease of relative intensity in (001) XRD reflection, and an increase in b axis dimension of unit cell. In addition, the degree and variation of chain-width disorder with nephrite types may support that an increase of metastability was formed by a rapid diffusion of Mg-rich fluid during the nephrite formation.

• Journal of Sensor Science and Technology
• /
• v.12 no.6
• /
• pp.273-281
• /
• 2003

A stoichiometric mixture for $CdIn_2Te_4$ single crystal was prepared from horizontal electric furnace. The $CdIn_2Te_4$ single crystal was grown in the three-stage vertical electric furnace by using Bridgeman method. The quality of the grown crystal has been investigated by the x-ray diffraction and the photoluminescence measurements. The (001) growth plane of oriented $CdIn_2Te_4$ single crystal was confirmed from back-reflection Laue patterns. The carrier density and mobility of $CdIn_2Te_4$ single crystal measured with Hall effect by van der Pauw method are $8.61{\times}10^{16}\;cm^{-3}$ and $242\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CdIn_2Te_4$ single crystal obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.4750\;eV-(7.69{\times}10^{-3}\;eV)T^2/(T+2147)$. After the as-grown $CdIn_2Te_4$ single crystal was annealed in Cd-, In-, and Te-atmospheres, the origin of point defects of $CdIn_2Te_4$ single crystal has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{Te}$, $Cd_{int}$, and $V_{Cd}$, $Te_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Cd-atmosphere converted $CdIn_2Te_4$ single crystal to an optical n-type. Also, we confirmed that In in $CdIn_2Te_4$ did not form the native defects because In in $CdIn_2Te_4$ single crystal existed in the form of stable bonds.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.49-62
• /
• 2006

The republic of korea has put a great emphasis on the role of the road as widening a social infra-structural facility. Thus, vast amount of money has been invested on the road establishment. As a result, there has been fruitful outcomes in establishing the road system of the nation especially for the flat road with ease. However, in order to have more systematic and sustainable road system, we should turn our attention to more painful and high-cost regions such as mountainous districts and those are to be developed effectively. The configuration of the road is an important factor to be considered in making a decision for the road planning. Nevertheless, current road planning criterion has no such clarified and objective judging standard for figuring the configuration of the road out and, as a result, speed planning can be decided incorrectly. our research has acknowledged the necessity of estimating the configuration of the road and aimed to make it organized and sorted according to the height, slope, and the vehicle's speed. The results are as follows. First, our research made use of GIS data and classified the road into 9 different areas according to the height and the slope. Also, road classification being matched to the data of vehicle's speed, it has been shown that those characteristics of different areas have made an influence on vehicle's speed. Secondly, based on the results of the similarity between geographical classification and, vehicle's speed of sorted groups according to the height and the slope, conclusively we have classified as flat, rolling region and mountain. Since our research has made use of vehicle's speed for National Highway, it is not applicable to different functional highways. However, for the highway to be established hereafter, it can be a standard for reflection geographical characteristics.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.369-384
• /
• 2006

Korean Peninsula, located on the southeastern part of Eurasian plate, belongs to the intraplate region. The characteristics of intraplate earthquake show the low and rare seismicity and the sparse and irregular distribution of epicenters comparing to interplate earthquake. To evaluate the exact seismic activity in intraplate region, long-term seismic data including historical earthquake data should be archived. Fortunately the long-term historical earthquake records about 2,000 years are available in Korea Peninsula. By the analysis of this historical and instrumental earthquake data, seismic activity was very high in 16-18 centuries and is more active at the Yellow sea area than East sea area. Comparing to the high seismic activity of the north-eastern China in 16-18 centuries, it is inferred that seismic activity in two regions shows close relationship. Also general trend of epicenter distribution shows the SE-NW direction. In Korea Peninsula, the first seismic station was installed at Incheon in 1905 and 5 additional seismic stations were installed till 1943. There was no seismic station from 1945 to 1962, but a World Wide Standardized Seismograph was installed at Seoul in 1963. In 1990, Korean Meteorological Adminstration(KMA) had established centralized modem seismic network in real-time, consisted of 12 stations. After that time, many institutes tried to expand their own seismic networks in Korea Peninsula. Now KMA operates 35 velocity-type seismic stations and 75 accelerometers and Korea Institute of Geoscience and Mineral Resources operates 32 and 16 stations, respectively. Korea Institute of Nuclear Safety and Korea Electric Power Research Institute operate 4 and 13 stations, consisted of velocity-type and accelerometer. In and around the Korean Peninsula, 27 intraplate earthquake mechanisms since 1936 were analyzed to understand the regional stress orientation and tectonics. These earthquakes are largest ones in this century and may represent the characteristics of earthquake in this region. Focal mechanism of these earthquakes show predominant strike-slip faulting with small amount of thrust components. The average P-axis is almost horizontal ENE-WSW. In north-eastern China, strike-slip faulting is dominant and nearly horizontal average P-axis in ENE-WSW is very similar with the Korean Peninsula. On the other hand, in the eastern part of East Sea, thrust faulting is dominant and average P-axis is horizontal with ESE-WNW. This indicate that not only the subducting Pacific Plate in east but also the indenting Indian Plate controls earthquake mechanism in the far east of the Eurasian Plate. Crustal velocity model is very important to determine the hypocenters of the local earthquakes. But the crust model in and around Korean Peninsula is not clear till now, because the sufficient seismic data could not accumulated. To solve this problem, reflection and refraction seismic survey and seismic wave analysis method were simultaneously applied to two long cross-section traversing the southern Korean Peninsula since 2002. This survey should be continuously conducted.

• The Korean Journal of Health Service Management
• /
• v.2 no.1
• /
• pp.37-55
• /
• 2008

This study aims to enhance work efficiency and satisfaction by offering data that make a physical therapist cope with stress coming from the job efficiently by identifying and analyzing the job satisfaction and work stress perceived by a physical therapist, and the level of reaction of a physical therapist. The study distributed survey questionnaires to 300 physical therapists working in medical institutions in Busan via mail and by visit from March 3, 2007 by selecting them simply and randomly from the physical therapist list, and collected the questionnaires by March 20, 2007, 103 respondents were working at 17 general hospitals including a university hospital, 65 respondents at 12 medical centers, and 79 respondents at 39 doctor's offices. The study collected 251 copies, which showed the collection rate of 83.7%, and analyzed 247 copies (82.3%) excluding 4 copies of insincere answers. As a research tool for measuring job satisfaction the study used a tool employed for research into the job satisfaction of physical therapists who work at medical institutions in Gwangju, Jeonnam, and Jeonbuk by Kim Hee-Gwon(1992) and research regarding job satisfaction by Jeong Jeong-Hee(2004) as well as research regarding the factors of job satisfaction by Flippo(1980) & Seberhagen(1970) after adjusting the research tools to the purpose of the study. Also for questions about work stress, the study employed nurses' job stress measurement tool developed by Kim Mae-Ja and em Mi-Ok(1984) by modifying the tool to the purpose of the study, and for a measurement tool for reaction to stress, the study used a tool employed for research into reaction to stress of nurses at general hospitals by Choi Eun-Deok(2005) without modification. For data analysis, the study used the SPSS12.0 as a statistical method, and then used t-test or ANOVA for verifying actual numbers, percentile, average :score, standard deviation, rank, and difference. Also, the study conducted which is a post-test method for variables that show a significant difference at the level of p<.05 level after the analysis. The findings include the following. 1) The respondents' job satisfaction score was 3.21 points on the average (out of 5 full points). The peer relationship ranked the highest, posting 4.02 points on the average, and the job satisfaction with rewards was proven the lowest, posting 2.51 points. For the job satisfaction level by characteristics, there were significant differences (p<.05) in gender, hospital type, weekly working hours, monthly working days, number of patients per day, department in charge of therapy, and number of peers, and there was no significant difference in characteristics other than that. 2) The respondents' work stress score was 2.72 points (out of 5 full points) on the average. The respondents were shown to be under the highest stress when they suffered from excessive workload, posting 3.49 points on the average, and they were shown to be under the least stress when they had a conflict with peers at another department, recording 1.90 points on the average. for the job stress level by the characteristics of job, there was a significant difference in the reflection of job assessment(p<.05). 3) 1n respondents' reaction to stress, most of them were shown to make efforts in coping with stress, posting 2.80 points (out of 5 full points). For their experience of being wider stress, they answered that 'they felt depressed (2.85 points)" for their experience of coping with stress, they answered that 'they were indifferent to it or thought about something else' (2.62 points). Also, for their efforts in coping with stress, they answered that 'they were motivated to remove their strain by taking leave, playing, or using their preferences' (3.52 points), which ranked higher. For the level of reaction to stress by characteristics, there were significant differences by age, gender, marital status, total service years as a physical therapist, monthly working days, and department in charge of therapy(p<.05). It is necessary to offer correct information by conducting an in-depth analysis of the stressful situations of physical therapists who exert efforts in rehabilitating patients at hospitals by factor, and seeking management plans based on the research results. Also, it is necessary to develop a program for coping with stress efficiently for removing stress and to conduct research into the understanding and cooperation of administrators and persons in charge of physical therapists for reducing physical therapists' stress at hospitals.