• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.446-453
• /
• 2021

This paper deals with two methods regarding fact and value. One is the method of H. Putnam, which is to break the boundary between fact and value and to make a world where the two have an inherent connection. The other is the method of J. Habermas, which regards fact and value as the product of an intersubjective agreement based on argumentation. Putnam, through his position of internal realism, moves from realism to pragmatism, especially by combining the rationalist tradition of Kant and Dewey's pragmatic views. Habermas also stands in the tradition of rationalism and universalism in Kant, at the same time emphasizing the practicability of truth in Hegel's tradition of historical reason. The significance of the strategy of Putnam and Habermas is that they have attempted to revive the realm of value against the strict dichotomy of facts and values and the subsequent devaluation of rationality in the realm of value. The starting point of this attempt is that the practical foundation of rationality is laid on life and practice. This could provide the room for escaping from rationality, which prioritizes only truths that reveal facts, that is, instrument-reduced rationality, the room for the revival of practical rationality through reflection on what is the purpose of life, and, in turn, the room for resisting to pass the realm of values and norms to the logic of habitual routines or customs. However, despite such common goal, there are clear limitations to Putnam's approach due to the differences in the strategies taken on facts and values. Putnam's method can demolish the whole universal framework that is the foundation where pragmatic pluralism will be fostered, eliminating the difference between the specificity of values and the universality of norms and shaking up the status of universal ethics. Therefore, Habermas' ethical theory is proposed as an alternative to establish a basis for universal ethics by relying on communication rationality and to secure the coercion of norms and blossom cultural pluralism as a diverse lifestyle based on this coercion.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.157-165
• /
• 2023

Ultrasound imaging uses sound waves of frequencies to cause physical actions such as reflection, absorption, refraction, and transmission at the edge between different tissues. Improvement is needed because there is a lot of noise due to the characteristics of the data generated from the ultrasound equipment, and it is difficult to grasp the shape of the tissue to be actually observed because the edge is vague. The edge enhancement method is used as a method to solve the case where the edge surface looks clumped due to a decrease in image quality. In this paper, as a method to strengthen the interface, the quality improvement was confirmed by strengthening the interface, which is the high-frequency part, in each image using an unsharpening mask and high boost. The mask filtering used for each image was evaluated by measuring PSNR and SNR. Abdominal, head, heart, liver, kidney, breast, and fetal images were obtained from Philips epiq5g and affiniti70g and Alpinion E-cube 15 ultrasound equipment. The program used to implement the algorithm was implemented with MATLAB R2022a of MathWorks. The unsharpening and high-boost mask array size was set to 3*3, and the laplacian filter, a spatial filter used to create outline-enhanced images, was applied equally to both masks. ImageJ program was used for quantitative evaluation of image quality. As a result of applying the mask filter to various ultrasound images, the subjective image quality showed that the overall contour lines of the image were clearly visible when unsharpening and high-boost mask were applied to the original image. When comparing the quantitative image quality, the image quality of the image to which the unsharpening mask and the high boost mask were applied was evaluated higher than that of the original image. In the portal vein, head, gallbladder, and kidney images, the SNR, PSNR, RMSE and MAE of the image to which the high-boost mask was applied were measured to be high. Conversely, for images of the heart, breast, and fetus, SNR, PSNR, RMSE and MAE values were measured as images with the unsharpening mask applied. It is thought that using the optimal mask according to the image will help to improve the image quality, and the contour information was provided to improve the image quality.

• The Korean Journal of Health Service Management
• /
• v.2 no.1
• /
• pp.37-55
• /
• 2008

This study aims to enhance work efficiency and satisfaction by offering data that make a physical therapist cope with stress coming from the job efficiently by identifying and analyzing the job satisfaction and work stress perceived by a physical therapist, and the level of reaction of a physical therapist. The study distributed survey questionnaires to 300 physical therapists working in medical institutions in Busan via mail and by visit from March 3, 2007 by selecting them simply and randomly from the physical therapist list, and collected the questionnaires by March 20, 2007, 103 respondents were working at 17 general hospitals including a university hospital, 65 respondents at 12 medical centers, and 79 respondents at 39 doctor's offices. The study collected 251 copies, which showed the collection rate of 83.7%, and analyzed 247 copies (82.3%) excluding 4 copies of insincere answers. As a research tool for measuring job satisfaction the study used a tool employed for research into the job satisfaction of physical therapists who work at medical institutions in Gwangju, Jeonnam, and Jeonbuk by Kim Hee-Gwon(1992) and research regarding job satisfaction by Jeong Jeong-Hee(2004) as well as research regarding the factors of job satisfaction by Flippo(1980) & Seberhagen(1970) after adjusting the research tools to the purpose of the study. Also for questions about work stress, the study employed nurses' job stress measurement tool developed by Kim Mae-Ja and em Mi-Ok(1984) by modifying the tool to the purpose of the study, and for a measurement tool for reaction to stress, the study used a tool employed for research into reaction to stress of nurses at general hospitals by Choi Eun-Deok(2005) without modification. For data analysis, the study used the SPSS12.0 as a statistical method, and then used t-test or ANOVA for verifying actual numbers, percentile, average :score, standard deviation, rank, and difference. Also, the study conducted which is a post-test method for variables that show a significant difference at the level of p<.05 level after the analysis. The findings include the following. 1) The respondents' job satisfaction score was 3.21 points on the average (out of 5 full points). The peer relationship ranked the highest, posting 4.02 points on the average, and the job satisfaction with rewards was proven the lowest, posting 2.51 points. For the job satisfaction level by characteristics, there were significant differences (p<.05) in gender, hospital type, weekly working hours, monthly working days, number of patients per day, department in charge of therapy, and number of peers, and there was no significant difference in characteristics other than that. 2) The respondents' work stress score was 2.72 points (out of 5 full points) on the average. The respondents were shown to be under the highest stress when they suffered from excessive workload, posting 3.49 points on the average, and they were shown to be under the least stress when they had a conflict with peers at another department, recording 1.90 points on the average. for the job stress level by the characteristics of job, there was a significant difference in the reflection of job assessment(p<.05). 3) 1n respondents' reaction to stress, most of them were shown to make efforts in coping with stress, posting 2.80 points (out of 5 full points). For their experience of being wider stress, they answered that 'they felt depressed (2.85 points)" for their experience of coping with stress, they answered that 'they were indifferent to it or thought about something else' (2.62 points). Also, for their efforts in coping with stress, they answered that 'they were motivated to remove their strain by taking leave, playing, or using their preferences' (3.52 points), which ranked higher. For the level of reaction to stress by characteristics, there were significant differences by age, gender, marital status, total service years as a physical therapist, monthly working days, and department in charge of therapy(p<.05). It is necessary to offer correct information by conducting an in-depth analysis of the stressful situations of physical therapists who exert efforts in rehabilitating patients at hospitals by factor, and seeking management plans based on the research results. Also, it is necessary to develop a program for coping with stress efficiently for removing stress and to conduct research into the understanding and cooperation of administrators and persons in charge of physical therapists for reducing physical therapists' stress at hospitals.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2016

Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.29-36
• /
• 2020

This study was conducted to suggest the new grassland grade system on evaluating the grassland status. The grassland status has been evaluated based on the forage yield (good, fair and poor) by municipal authorities. The grassland grades by current system were 19 good, 11 fair and 11 poor among the 41 grassland farms from 6 provinces. This evaluation result differed greatly from the result of actual measurement of forage yields which showed all poor. The big difference was resulted from failing the reflection of the various characteristics, such as different seasonal growth and harvest frequency. Furthermore, the lack of consistent examining date and method added the inaccuracy of current grassland grade system. The new grassland grade system based on the grassland vegetation ratio (grass, weed and bare soil) was initially designed into 6-grade system (1st; 100~80%, 2nd; 79~60%, 3rd; 59~40%, 4th; 39~20%; 5th; 19~1% and 6th; 0% on the basis of grasses proportion), but later was changed into 4-grade system (1st, 2nd, 3rd, and 4th grades are 70% or more, 50% or more, 50% or less, and 0% of forage proportion, respectively) after reflecting the opinion of grassland farms and municipal authorities. Re-evaluation on the grassland status using the 4-grade system resulted in the total 80% consisted of 2nd, 3rd and 4th grade which means most grasslands needs the partial reseeding or the rehabilitation of entire grassland. Pictures and schematic diagrams depicting the 4-grade system were presented to improve the objectivity of evaluation. The optimal time for assessing grassland status is fall when plant height 20~30 cm. Conclusively, the 4-grade system is an efficient method for all non-professionals including grassland farms or municipal authorities in assessing the grassland status. To apply this system to the field, the institutional arrangements such as amendment of grassland act should take place in advance.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.487-499
• /
• 2021

Purpose:The purpose of the paper is to review the problems of performance enhancement of safety certification standards and to suggest directions for improvement in order to rationalize safety certification standards for future industrial development and environmental changes. Method: The problems and limitations of the safety certification system are summarized through literature review and interview with manager, and the status of safety certification standards is classified into design standards, performance standards, and detailed standards, and the status analysis is performed. In addition, by synthesizing the results of the investigation and analysis, improvements are suggested to improve the performance of the safety certification standards. Result: Through the survey, the problems and limitations of safety certification could be grouped into six categories: government-led certification system operation, standardized certification standards, long time required to improve certification, poor certification standards preparation system, and lack of reflection of industry opinions. And, as a result of analyzing the certification standards by dividing them into performance and design standards, in the case of machinery, equipment, and protection devices, the design standards were high at 69.7% and 64.9%, whereas in the case of protective equipment, the performance standards were high at 61.1%. In order to improve the performance of safety certification standards centered on design standards, it is necessary to determine the possibility of performance enhancement of the certification standards and determine the feasibility of the inspection test method. In order to improve performance, it was reviewed that it was necessary to establish a systemic foundation and infrastructure, such as strengthening the Product Liability Act, systematizing market monitoring, etc., distributing certification test tasks, and participating in the preparation of certification standards by the private sector. Conclusion: Through this study, the problems and limitations of Korea's safety certification system were summarized and the necessity for performance improvement was reviewed. Performance improvement of safety certification standards is a matter that requires preparatory work, such as legislative revision and infrastructure construction, and requires mid-to-long-term promotion. In addition, rather than improving the overall safety certification standards, the performance requirements for each item subject to certification should be reviewed and promoted, and details should be specified through additional research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.853-860
• /
• 2022

The purpose of this study is to suggest an improvement plan for the calculation method of the engineer standard wage rate (ESWR) and to compute a reasonable ESWR. To this end, an adequacy review of theESWR calculation criteria was conducted along with an extensive engineering industry survey. The survey results were analyzed using an effective response sample of 748 companies out of 1,000 survey samples extracted by stratifying the 5,879 survey population. The main results were as follows. ①When calculating the engineering service fee, the prime contractor's engineer wage is suitable for the ESWR. The ESWR can be estimated by the formula 'average wage÷[1-proportion of subcontract orders×(1-subcontract rate)].' ② The field survey showed that the number of monthly working days was 20.35-20.54 days at 99 % confidence interval, which was significantly different from the current standard (22 days). In addition, as a result of a legal review of the ESWR criteria, it was found that the number of working days should be calculated in accordance with the Labor Standards Act after 2022. ③ Applying government guidelines, the time difference between the wage survey and the ESWR application can be corrected by the past ESWR increase rate for a specific period. ④ Using modeling based on the analysis above, the current ESWR was 13.5-14.5 % lower than the appropriate level. A lower ESWR was driven by the non-reflection of subcontract structure (4.1 %), overestimation of monthly work days (6.8-7.8 %), and application of past wage (2.6 %). The proposed model is expected to be widely used in policy making, as it can provide a useful framework for calculating the standard wage rate in similar industries as well as calculating appropriate engineering fees.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.315-326
• /
• 2015

This study has started from a curiosity about how the concept and characteristics of mise en abyme, which is one of meta-discourse in the contemporary aesthetics and has affected every aspect of modern philosophy, art, and culture, are expressed in modern architecture. 'Mise en abyme' is a technique mainly used by writers of the nouveau roman after it was introduced first in the work of novelist Andre Gide; this technique of artistic expression has been extended across the whole contemporary art and has become the meta-discourse which essentially makes its appearance in the art after postmodernism. 'Mise en abyme', meaning endless formation of image between two mirrors, got involved with discourse of the various philosophers of the time such as Deleuze and Derrida, and was also expressed in the language of architecture by modern architects who have been influenced by their philosophy. In this context, the technique of mise en abyme which is mostly used in art has a relation to methods of space expression of architects. This research studied the characteristics of mise en abyme which show in the expressional method of the modern architecture based on the relationship between the technique of mise en abyme and the modern method of architectural expression. Moreover, on the basis of this an analysis was carried out on architectural works of Jean Nouvel, who uses de-materialization and singularity as the architectural language. Through the research it was confirmed that the characteristics of expression of mise en abyme in architecture are embodied in material of the surface which forms buildings' exterior, or expressed by using reflection and graphical factors. Through analysis this study allows the chance to see that even though the means and field for expressing mise en abyme are different, the characteristics of the fundamental concept are shared among them, and to think about the meaning in the technique of mise en abyme as one yardstick to understand modern architecture in modern times with no specific mainstream.

• Journal of the Daesoon Academy of Sciences
• /
• v.24_2
• /
• pp.231-270
• /
• 2015

This thesis examined Chu Hsi's self-cultivation theory as the representative theory of cultivation in Confucianism, while juxtaposing it to self-cultivation theory in Daesoon thought, concentrating on its similarity and difference. Neo-Confucianism is a scholarship which has wielded a tremendous influence upon East Asia, while functioning as an official scholarship for long period up to Yuan, Ming, and Ching period, after achieving its synthesis by Chu Hsi. After 13th century, Neo-Confucianism has been a representative academic system in Confucianism, and self-cultivation theory was in its center. It suggested various virtues that classical scholars have to equip to fulfill the sainthood and the politics of royal road. The self-cultivation theory of Chu Hsi was developed upon the basis of the theory 'Li-Qi' and the theory of mind. Here, the practice of Geokyung(morally awakened state with a reverent spirit in every moment) and Gyeokmul-tsiji(reaching into the utmost knowledge through investigation of things) formed a nucleus of Chu Hsi's self-cultivation theory. While Geokyung was to reveal one's true nature through cultivation of mind, Gyeokmul-tsiji was to demonstrate the complete use of mind's essence and function. Chu Hsi's self-cultivation theory attempted to realize the unity of heaven and man, and through cultivating self and governing people, it also tried to achieve its ideal of the society of Great Union(Daedong). Daesoon Thought is originated from Sangjenim who has descended to this world as a human being called Jeungsan. He went on his circuit to rectify the disorder of heaven and earth for 9 years to rectify the Three worlds of heaven, earth and human being which were faced with total annihilation due to its rule of mutual conflict, while creating an earthly paradise. Respecting the will of Sangjenim, Dojunim established the foundation of Do through launching 'Meukeukdo' and setting tenet, creed and object so that the cultivators (Doins) could believe and respect the truth of Sangje's great itineration (Daesoon). Among those, the two components of creed, which are four fundamental principles and the three fundamental attitudes are of great account as precept and cardinal point. Through this means, the cultivators of Daesoonjinrihoe aspire to guard against self-deception through transforming the human spirit, to realize earthly immortality through renewing human beings, and to create an earthly paradise through transforming the world. This thesis attempted to compare and analyze the theory of self-cultivation in Neo-Confucianism and Daesoon Thought in the aspect of ground, method, and object of cultivation. First, as for the ground of cultivation, the doctrines of Chu-tzu and Daesoon thought place the essence of cultivation on 'heaven'. Yet, whereas the former postulates Taekeuk (the Great Ultimate) as a principle as well as the heaven of a natural order, Daesoon thought postulates Sangenim as the heaven of superintendence as well as the heaven of a natural order, signified as its equation of Daesoon with circle, along with the unity of Meukeuk (Endlessness) and Taegeuk (the Great Ultimate). Further, the doctrine of Chu-zhu and Daesoon thought is identical in the point that both thoughts see mind as the subject of cultivation, while trying to restore a pure essence. Nevertheless, whereas Neo-Confucianism intends to give scope to ability of the complete use of mind's essence and function, Daesoon Thought sees mind as the essence which is used by spiritual beings and as an organ that heaven, earth and human being rely upon as the center of the universe. In the aspect of method of cultivation, the doctrine of Chuzhu lays emphasis on the rational factor in that it brightens its 'myung-deoki'(bright inner virtue),' while trying to correspond to the law of heaven on the basis of 'Geokyung' and 'Gyeokmul-tsiji.' On the contrary, Daesoon thought lays much emphasis on faith factor in that it aspires for human perfection based on the restoration of conscience by cultivating Daesoonjinri with sincerity, reverence and faith along with 'quieting the heart-mind', 'quieting the body', 'respecting the God of the Ninth Heaven', and 'observing ritual practice on the basis of the faith in Sangjenim. Yet, both thoughts have similarities in that cultivation of body forms the basis and that they attempt to realize their ideals through cultivation in daily life while taking 'Guarding against self-deception' as the key method of self-cultivation.' However, the principle of Chu-zhu can be said to be a voluntary and autonomous practice based on scripture of the saint as well as self-reflection. On the other hand, Daesoon thought reveals certain difference in that it combines faith factor with one's self-effort by concentrating on cultivation under the presence of Sangjenim as the object of belief and the spirits of heaven and earth. In the aspect of object of cultivation, both thoughts share similarities in that the saint and the perfected gentleman with a moral virtue as an ideal image of men in both thoughts attempt to realize each of their 'myung-deok' in human nature as a heavenly mandate while respecting morality. Further, they also share similarity in the point that the desirable characters in both thoughts want to participate in harmonious creation and nurturance. Yet, the perfected gentleman with a moral virtue is also characterized by its aim for a new heaven and earth where there is no mutual conflict but mutual beneficence, by promoting the moral influence and virtue of Sangjenim over one's own virtue, while practising the mutual beneficence of all life through harmonious union of divine beings and human beings.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2010

Seismic reflection surveying is one of the most widely used and effective techniques for coal seam structure delineation and risk mitigation for underground longwall mining. However, the ability of the method can be compromised by the presence of volcanic cover. This problem arises within parts of the Bowen and Sydney Basins of Australia and seismic surveying can be unsuccessful. As a consequence, such areas are less attractive for coal mining. Techniques to improve the success of seismic surveying over basalt flows are needed. In this paper, we use elastic wave-equation-based forward modelling techniques to investigate the effects and characteristics of seismic wave propagation under different settings involving changes in basalt properties, its thickness, lateral extent, relative position to the shot position and various forms of inhomogeneity. The modelling results suggests that: 1) basalts with high impedance contrasts and multiple flows generate strong multiples and weak reflectors; 2) thin basalts have less effect than thick basalts; 3) partial basalt cover has less effect than full basalt cover; 4) low frequency seismic waves (especially at large offsets) have better penetration through the basalt than high frequency waves; and 5) the deeper the coal seams are below basalts of limited extent, the less influence the basalts will have on the wave propagation. In addition to providing insights into the issues that arise when seismic surveying under basalts, these observations suggest that careful management of seismic noise and the acquisition of long-offset seismic data with low-frequency geophones have the potential to improve the seismic results.