• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.122-130
• /
• 2021

The types of artifacts that are observed in intraoperative neurophysiological monitoring (INM) is truly diverse. The removal of artifacts that interfere with the examination is essential. In addition, improving the quality of the examination by removing artifacts is a reflection of the competency of the examiner and is also the best way to ensure patient safety. However, if knowledge of the equipment or anesthesia in the operating room is insufficient due to lack of experience, artifacts cannot be removed even with a method appropriate to the situation. If artifacts are not separated and removed, the reading of the examination results in confusion in the operation process. This can be a fatal problem in neurosurgery that requires rapid and sophisticated procedures. In this paper, the causes of artifacts that occur during surgery are classified into electrical factors, non-electrical factors, and other factors, and a method and examination method for removing artifacts according to the specific situation is mentioned. Although the operating room environment is a very critical place to simultaneously consider various scenarios, we hope that a stable and optimal INM will play a role by knowing the types and causes of various artifacts and how to tackle them.

• Smart Media Journal
• /
• v.11 no.2
• /
• pp.77-83
• /
• 2022

The neuromorphic architecture uses a spiking neural network (SNN) model to derive more accurate results as more spike values are accumulated through inference experiments. When the inference result converges to a specific value, even if the inference experiment is further performed, the change in the result is smaller and power consumption may increase. In particular, in an AI-based IoT environment, power consumption can be a big problem. Therefore, in this paper, we propose a technique to reduce the power consumption of AI-based IoT by reducing the inference time by adjusting the inference image exposure time in the neuromorphic architecture environment. The proposed technique calculates the next inferred image exposure time by reflecting the change in inference accuracy. In addition, the rate of reflection of the change in inference accuracy can be adjusted with a coefficient value, and an optimal coefficient value is found through a comparison experiment of various coefficient values. In the proposed technique, the inference image exposure time corresponding to the target accuracy is greater than that of the linear technique, but the overall power consumption is less than that of the linear technique. As a result of measuring and evaluating the performance of the proposed method, it is confirmed that the inference experiment applying the proposed method can reduce the final exposure time by about 90% compared to the inference experiment applying the linear method.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.185-192
• /
• 2023

Currently, the number of Long-Term Care Hospital in Korea is continuously increasing with the increase in the elderly population. Patients admitted to Long-Term Care Hospital are mainly elderly with chronic diseases, and because they are for long-term care, they often die in Long-Term Care Hospital, and the importance of end-of-life care is gradually increasing. In spite of these characteristics Studies on end-of-life care for nurses in Long-Term Care Hospital are mainly quantitative studies, and there is a limit to in-depth understanding of end-of-life care experiences. Therefore, The purpose of this study is to understand the meaning of Long-Term Care Hospital nurses' nursing experienceof end-of-life patients through a phenomenological method, and to describe and understand the meaning of the phenomenon in depth. The subjects of this study were 7 nurses who had worked for more than 6 months at a nursing hospital located in C city. The research method was in-depth interviews, and data were collected from December 2021 to March 2022. The interview date were analyzed by Giorgi's phenomenological method. As a result of the study, 'nurses' attitude toward end-of-life care', 'ambivalence toward life prolongation', 'reality of end-of-life care in Long-Term Care Hospital', and 'reflection on life and death' were found. Therefore, it is thought that End-of-life nursing Continuing educationand interventional education programs should be developed to change Long-Term Care Hospital nurses' end-of-life care attitudes and improve coping skills.

• Journal of Korean Philosophical Society
• /
• no.117
• /
• pp.139-167
• /
• 2017

This essay attempts to reveal how taste spontaneously cultivates and why it is necessary for cultivating taste to edify our personality and to develop culture. It is a key of the solution of the problems that taste always reflects its judgment through pleasure. Because the grounds of the universal validity of the judgment of taste are found, whenever taste tests the validity of its own judgment, the so-called 'delight of discovery' makes taste cultivate itself. For having the moral personality, we need to practice spontaneously the morality of our own behaviour and for judging whether an artwork to represent the period is succeeded or not, we need to have a high insight to select the cultural heritage. But the autonomous thinking can delightfully be made a habit, judging the beauty of artworks. In the main body of this essay, it is determined from the three examples of the negative judgment of taste which Kant suggested in deduction. According to Kant, the negative judgment of taste means that the beautiful work is displeased, but what it asserts is that taste is cultivated. I formalize the methods of reflection of taste revealed in three negative judgments of taste into'resisting', 'indicating of error', 'self-retracting'.(Chapter 2) And from this, I emphasize the necessity to cultivate taste in the way that these methods of the cultivation of taste can affect building our personality by stimulating our reason to have interest in moral(Chapter 3) and in the way that taste directly judges the product of cultural succession.(Chapter 4) In the end of last chapter, I examine further essentially the method of the reflection of taste, to inquire into how to enable it.(Chapter 5) Especially, I try to illuminate its grounds through Schiller's concept of the "impulse of amusement(Spieltrib)", because his explanation helps us to understand the dynamics of taste's delight of discovery. Although the abilities of mind conflict with each other, taste has the characters that it reflects to encourage them for each other and that it is vitalized by its own activity. We, as it were, can pleasantly handle two tasks, because taste makes the impulse of amusement from conflictive impulses in mind. In conclusion, I state that we have to experience directly the impulse of amusement like creative artist, because it is maximized from creation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.559-575
• /
• 2014

In this paper, we propose a horizontal/vertical calibration kit for calibrating a vector network analyzer(VNA) to measure the vertical connector pin. If the conventional calibration kit is used, we should change the arm for a probe or need an assistant device and it takes a long time. In addition there is a risk of precision degradation caused by the position change of the probe tip sensitive to the surroundings. We suggest a 4-port vertical calibration kit to make up for the aforementioned shortcomings. The calibration kit was manufactured for the SOLT calibration method. 'Short', 'Open', and 'Load' are available in the horizontal plane, 'Thru' is available not only in the horizontal plane on the two planes of a PCB, but in the vertical plane between the two planes according to the positions of the probes. We complemented the conventional calibration kit to make a vertical calibration kit to be used for the vertical measurement method. We compared and analysed their reflection/transfer characteristics of the SOLT calibration standards of the proposed calibration kit and conventional one, we get a ${\pm}0.1$ dB differences of transfer characteristics in the range from 300 kHz to 8.5 GHz. In order to demonstrate usefulness, and we performed a case study for horizontal and vertical cases, and compared the results of the proposed calibration kit and conventional one.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.353-362
• /
• 2016

Thermal barrier coating (TBC) is an essential element consisting of a super-alloy base and ceramic coating designed to achieve long operational time under a high temperature and pressure environment. However, the top coat of TBC can be delaminated at certain temperatures with long operation time. As the delamination of TBC is directly related to the blade damage, the coupling status of the TBC should be assured for reliable operation. Conventional studies of nondestructive evaluation have been made for detecting generation of thermally grown oxide (TGO) or qualitatively evaluating delamination in TBC. In this study, the ultrasonic C-scan method was developed to obtain the damage map inside TBC by estimating the delamination in a quantitative way. All specimens were isothermally degraded at $1,100^{\circ}C$ with different time, having different partial delamination area. To detect partial delamination in TBC, the C-scan was performed by a single transducer using pulse-echo method with normal incidence. Partial delamination coefficients of 1 mm to 6 mm were derived by the proportion of the surface reflection signal and flaw signal which were theoretical signals using Rogers-Van Buren and Kim's equations. Using the partial delamination coefficients, the partial delamination maps were obtained. Regardless of the partial delamination coefficient, partial delamination area was increased when degradation time was increased in TBC. In addition, a decrease in partial delamination area in each TBC specimen was observed when the partial delamination coefficient was increased. From the portion of the partial delamination maps, the criterion for delamination was derived.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.213-218
• /
• 1996

An improved crystal rotation method with increased accuracy and range is proposed and experimentally verified for simultaneous measurement of molecular tilt angle and thickness of LC (liquid crystal) layer of an LC cell. The improvement is brought about by direct determination of difference between phases instead of intensities of two components of orthogonal linear polarization of the light passing through an LC cell filled with uniformly oriented molecules. By comparing the experimental data with theoretical result the thickness and pretilt angle are determined more precisely. Further improvement is brought about by use of a liquid gate filled with an index matching liquid in which the LC cell is immersed. Because of the index matching liquid reflection of light at the surfaces of an LC cell almost completely disappears and the range of angle of refraction in the LC layer increases significantly, which gives rise to increased signal to noise ration as well as decreased statistical error. With this improvement precise measurement for either very thin (<10 ${\mu}{\textrm}{m}$) and/or higher pretilt angle($\geq$10$^{\circ}$) LC cells become possible.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.9 no.1
• /
• pp.144-154
• /
• 2003

Recently, in the academic disciplines critical thinking has been emphasized as the new evolution in education. Problem-based learning is suggested as the evolutionary learning method in developing critical thinking. In the nursing education, PBL is offered as an appropriate teaching method to prepare nurse student for professional. PBL is a student-centered learning strategy aimed at developing critical thinking, motivating self-directed study and attaining autonomy. The purpose of this study was to develop the communication curriculum of nursing education based on PBL and implementing of it. PBL module was developed focused on five communication situations. And learning strategies to facilitate the learning process and the guided questions to stimulate student inquiry were also developed. This PBL education was conducted for six students in the master's course during the 14 weeks from March, 2000 to June, 2000. The outcomes of the PBL education were examined based on the content analysis of the students reflective journal. As a result, it was found that students experienced the effect of it focused on self-oriented, group-oriented, and practice-oriented domain. In the self-oriented domain, the findings indicate that there were 5 kinds of concepts including 'motivation for self-directed study', 'transition toward certainty in knowledge acquisition', 'attempt to apply their prior knowledge into new situation', 'enhancement of self-image in real situation', 'self-growth with self reflection'. In the group-oriented domain, there were 3 kinds of concepts including 'cognitive work in group', 'perception of co-responsibility in attaining learning objectives', 'socialization with group members'. In the practice-oriented domain, there were 3 kinds of concepts including 'linkage theoretical knowledge with real situation', 'attempt to apply in real situation', 'development problem solving skill in real situation'. In conclusion, PBL had a significant effect on self, group, and clinical domain. And assessing PBL outcomes is challenging because standardized instrument do not develop yet. So the findings of this study can suggest the basic data for examining the PBL outcome.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.3
• /
• pp.139-148
• /
• 2000

In this paper, the interaction of oblique incident waves with a bottom-mounted and fluid-filled flexible membrane structure is investigated in the frame of linear hydro-elastic theory. The static shape of a membrane structure containing the fluid of a specific density is initially unknown and must be calculated before the hydrodynamic analysis. To solve hydrodynamic problem, the fluid domain is divided into the inner and outer region. The inner solution based on discrete membrane dynamic model and simple-source distribution over the entire fluid boundaries is matched to the outer solution ba~ed on an eigenfunction expansion method. The numerical results were compared to a series of Ohyama's experimental results. The measured reflection and tran¬smission coefficients reasonably follow the trend of predicted values. Using the computer program developed, the performance of a bottom-mounted and fluid-filled flexible membrane strocture is tested with various system parameters (membrane shape, internal pressure, density ratio) and wave characteristics (wave frequencies, incident wave angle). It is found that a bottom-mounted and fluid-filled flexible membrane structure can be an effel;tive wave barrier if properly designed.

• Archives of design research
• /
• v.13 no.4
• /
• pp.233-242
• /
• 2000

The traditional image of hydraulic excavator started to change in two ways since 1990. First, post-heavy equipment's visual image was new waves to traditional image of heavy, strong, and wild. They are the negative aspect that excavators have. Another movement of getting rid of its negative image can be found in late-heavy equipment, which was intended to adapt traditional and positive, but off negative images. In 1990s, the design trend is moving from warm/hard to warm/soft, and KOBELCO can be exceptional example that went even further, gone up to cool-soft image. KOBELCO specially aimed 'post- excavator image' strategy, which has been successful. Image of cabin as a human space changed little bit further than outside image. Each company tried to differentiate the design of cabin focusing on its safety. Following paragraphs show specific trend of image change in form, colour, texture, and the composition. Major visual image change in form tries to follow the image of cars and home appliances which are showing the movement from tough and hard image to soft one. Structural change on local image shows the movement from angular edge to edgeless and the movement of cabin's pillar C placed to back of the equipment with gentle inclination. All of these movements are the result of effort to improve traditional excavator's negative image, that top structure is assembled separately, to positive ones. Today's tendency about its color becomes important to apply two different colour styles. Each style has brightness and tone comparison. As an enormous power convey system, it was in common that its brightness comparison was useful because of the alarm of its damage possibility. However, as its colour control and its design have been emphasized gradually, the tone comparison takes a part in an important role, too. As an example, there is an occasion that these comparisons are compromised simultaneously. In the respect of its image creation, its texture treatments make the tendency of being the same as passenger cars. It is caused from its development of the manufacture techniques of from the fabrication method in small business to the press method in big firm. Further, it is also because of its improvement of painting & coating skills. It may prohibit the reflection effect from solar rays. In the point of view of its visual images, it is recognized the prominent tendency that its composition has been gradually decreased. Lots of windows and the frames tends dark-colour as a whole. It is more preferred to have one colour image, but except KOBELCO and HITACHI. As well, there is another high-tendency to improve its standard treatments, especially for its corner and texture treatments.