• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.897-902
• /
• 2015

This study reports on a uniform resin coating method by using a doctor blade type dispenser. For high productivity, continuous imprint-lithography has been studied, and developed fabrication systems are used in several applications such as anti-reflection films, dry adhesives, and water collecting surfaces. In the continuous fabrication field, researchers have typically focused on patterning and demolding procedures. During the roll-to-roll fabrication process, however, the uniform resin coating process is also important in order to obtain a high quality product, which can be evaluated by uniform thickness, precise geometric expressions, and a thin residual layer. To achieve these, a doctor blade type dispenser was designed and fabricated. As a result, thickness of coated resin was well controlled by modulating the flow rate of the resin and blading gap. In addition, a very thin layer coating process (${\sim}10{\mu}m$) was achieved by softly contacting the blade on the substrate.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.51-61
• /
• 2003

Pollution purification using titanium dioxide (TiO$_2$) photocatalyst has attracted a great deal of attention with increasing number of relent environmental problems. Currently, the application of TiO$_2$ photocatalyst has been focused on purification and treatment of waste water. However. the use of conventional TiO$_2$ powder photocatalyst results in disadvantage of stirring during the reaction and of separation after the reaction. And the usage of artificial UV lamp has made the cost of photocatalyst treatment system high. Consequently, we herein studied the pilot-scale design to aid in optimization of the energy-saving process for more through development and reactor design by solar light/UV lamp/ TiO$_2$system. In this study, we manufactured the TiO$_2$sol by sol-gel method. According to analysis by XRD, SEM and TEM, characterization of TiO$_2$ sol were nano-size (5-6 nm) and anatase type. Inorganic binder (SiO$_2$) was added to TiO$_2$ lot to be coated for support strongly, and support of ceramic bead was used to lower separation rate that of glass bead The influences were studied of various experimental parameters such as TiO$_2$ quantity, pH, flow rate. additives, pollutants concentration, climate condition and reflection plate by means of reaction time of the main chararteristics of the obtained materials. In water treatment system, variable realtor as solar light/ or UV lamp according to climate condition such as sunny and cloudy days treated the phenol and E-coli(Escherichia coli) effectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1591-1596
• /
• 1991

The present paper describes a method of recognizing a polyhedron employing the notion of network constraint analysis. Typical difficulties in three-dimensional object recognition, other than shading, reflection, and hidden line problems, include the case where appearances of an object vary according to observation points and the case where an object to be recognized is occluded by other objects placed in its front, resulting in incomplete information on the object shape. These difficulties can, however, be solved to a large extent, by taking account of certain local constraints defined on a polyhedral shape. The present paper assumes a model-based vision employing an appearance-oriented model of a polyhedron which is provided by placing it at the origin of a large sphere and observing it from various positions on the surface of the sphere. The model is actually represented by the sets of adjacent faces pairs of the polyhedron observed from those positions. Since the shape of a projected face gives constraint to that of its adjacent face, this results in a local constraint relation between these faces. Each projected face of an unknown polyhedron on an acquired image is examined its match with those faces in the model, producing network constraint relations between faces in the image and faces in the model. Taking adjacency of faces into consideration, these network constraint relations are analyzed. And if the analysis finally provides a solution telling existence of one to one match of the faces between the unknown polyhedron and the model, the unknown polyhedron is understood to be one of those memorized models placed in a certain posture. In the performed experiment, a polyhedron was observed from 320 regularly arranged points on a sphere to provide its appearance model and a polyhedron with arbitrarily postured, occluded, or imposed another difficulty was successfully recognized.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.1
• /
• pp.155-163
• /
• 2010

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on-board the NASA's Terra spacecraft provides along-track digital stereo image data at 15m resolution with a base-height ratio 0.6. Automated stereocorrelation procedure was implemented using the ENVI 4.1 software to derive DEMs with $15m{\times}15m$ in 43km long and 50km wide area using the ASTER stereo images. The accuracy of DEMs was analyzed in comparison with those which were obtained from digital topographic maps of 1:25,000 scale. Results indicate that RMSE in elevation between ${\pm}7$ and ${\pm}20m$ could be achieved. Excluding cloud, water and building areas as the factors which make RMSE value exceeding 10m, the accuracy of DEMs showed RMSE of ${\pm}5.789m$. Therefore for the purpose of elevating accuracy of topographic information, we intended to detect the cloud areas and shadow areas by a landcover classification method, remove those areas on the ASTER DEM and then replace with those areas detached from the cartographic DEM by band math.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.365-377
• /
• 2018

The purpose of the study was to analyze the concept of happiness that would be experienced in life of Korean cancer survivors. The concepts of happiness were analyzed using the Rogers' evolutionary concept analysis method for 11 papers satisfying the selection criteria, among domestic journals published from January 2000 to September 2017. The result of this study was that attributes of happiness were subjective experience, positive mind, meaning of life and formation of relationship. Antecedents were to accept-risk-of-life, cope-with-the-reality, implement-self-reflection and environmental-support. As a result of the concept, cancer survivors' inner strength increased, they became feeling love and pursuing new lives, and felt happiness through self-realization. This study is valuable to suggest a basic framework for the stepwise assessment that can improve the happiness of Korean cancer survivors and cancer survivors should be managed through multidisciplinary convergence programs.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.5-14
• /
• 2001

The NDT(Non-Destructive Testing) technique, detecting defects without damaging foundations, has, lately, been a matter of concern. In this study, the applicability of the borehole methods(CSL, CT, PS) and the surface reflection methods(SE, IR) to the evaluation of integrity of drilled shaft was investigated through field test. Ten drilled shafts, 0.4 m in diameter and 7.0 m long each, were constructed, one shaft with no defect and nine shafts intentionally with the combination of the common defects such as soft bottom, necking, bulging, cave-in, and/or weak concrete. Analysing each NDP test result on the constructed drilled shafts, an optimum combination of the NDP methods as well as the applicability of each NDP method to detecting defects of drilled shaft have been investigated.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.2
• /
• pp.129-144
• /
• 2017

Throughout the rich human history, patterns have developed as a symbolic sign and representation of the inner psychology of human beings. Thanks to its intrinsic beauty and emotional richness, the flower has been utilized as a one of the major materials for patterns used in everyday life and art. As a product of nature, floral patterns have played a key role in fashion trends as a Surface Design with other elements of fashion design such as silhouette, fabric and color. Therefore, this research sought to identify the trends of floral patterns of women's garments that appeared at the four major global fashion collections (Paris, Milano, New York and London), and to analyze how importantly the fashion magazines' prediction were applied in the actual collections. Furthermore, the research aimed to suggest possible methods to utilize trend magazines for collections in the future. As a main research method, the authors investigated professional fashion literature and internet websites to extract a total of 4,681 items presented by sixteen designers who participated in the four major global fashion collections each time during the period of the 2012 S/S~2017 S/S seasons. First View Korea and Samsung Design Net were used as major sources for the pattern extraction and analysis. According to the analysis, floral patterns account for 31%(1,454 items) among the total number of patterns appearing in the four major global fashion collections(4,681 items). For the reflection ratio, Samsung Design Net recorded a 4% higher ratio(52%) than First View Korea(48%). Based on the data and analysis of this research, the authors expect that floral patterns in various forms will be continuously presented in fashion collections, and conclude that utilizing fashion magazines is highly useful due to their appropriate predictions.

• Journal of The Korean Association For Science Education
• /
• v.34 no.3
• /
• pp.295-301
• /
• 2014

The purpose of this study is to investigate the difficulties of teachers and students on the unit about 'measuring weight.' In this research, we have acquired data about teachers through survey, interview, and self-reflection journals, at the same time we have collected information on the students through survey, assessment test, and interview. We have extracted the difficulties from analysis with constant comparison method. In addition, we have analysed the curriculum of science and mathematics to know the leaning sequence. The analysis had been checked up by experts in science education. The result of the study is as follows: The difficulties of teachers are from the lack of teachers' descriptive knowledge, disorder of conceptual hierarchy in the curriculum, poor experimental instruments, and low psychomotor skill of students. The difficulties of students are from common misconceptions, opaque concepts, lack of manipulation skill, insufficiency of mathematical ability, difficulty of application of principles to the real situation, and lack of problem-solving ability. In addition, teachers have recognized that students face more difficulties in experiment class, while students think that they face more difficulties in conceptual understanding class.

• Korean Journal of Social Welfare
• /
• v.62 no.2
• /
• pp.349-373
• /
• 2010

The purpose of this paper is to critically analyze the way of knowledge production in social welfare and to graft feminist epistemology to the discipline of social welfare. To put it more concretely, as analyzing the epistemological and methodological issues appeared in the articles in "orean Journal of Social Welfare", this study examines the meanings of feminist epistemology and its implications to research and practice in social welfare. From its onset, feminist research criticized the 'mainstream' ways of conceptualizing knowledge construction via research conducted upon a positivist epistemological position. Particularly, western feminists have problematized the androcentric bias embedded within the so-called 'social sciences' that we have taken for granted as 'scientific,' 'objective,' and 'neutral,' and attempted to redirect and reformulate the way of knowledge production with new concepts of 'strong objectivity,' 'partial/situated knowledge,' and 'strong reflection.' We believe that the implications of feminist epistemology to enable us to reflect the power relationship between subject and object, I and Other, and the researcher and the researched will contribute to recover the original vision of social welfare as critical theory and liberating practice in social work.

• Composites Research
• /
• v.24 no.2
• /
• pp.38-45
• /
• 2011

In this paper, we present an optimization method for the single Dallenbach-layer type microwave absorbers composed of E-glass fabric/epoxy composite laminates. The composite prepreg containing carbon nanotubes (CNT) was used to control the electrical property of the composites laminates. The design technology using the genetic algorithm was used to get the optimal thicknesses of the laminates and the filler contents at various center frequencies, for which the numerical model of the complex permittivity of the composite laminate was incorporated. In the optimal design results, the content of CNT increased in proportion to the center frequency, but, on the contrary, the thickness of the microwave absorbers decreased. The permittivity and reflection loss are measured using vector network analyzer and 7 mm coaxial airline. The influence of the mismatches in between measurement and prediction of the thickness and the complex permittivity caused the shift of the center frequency, blunting of the peak at the center frequency and the reduction of the absorbing bandwidth.