• 제목/요약/키워드: Reflection Type Phase Shifter

검색결과 24건 처리시간 0.024초

A 5-17 GHz Wideband Reflection-Type Phase Shifter Using Digitally Operated Capacitive MEMS Switches

  • Kim, Jung-Mu;Lee, Sang-Hyo;Park, Jae-Hyoung;Baek, Chang-Wook;Kwon, Young-Woo;Kim, Yong-Kweon
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2003년도 추계학술대회 발표 논문집
    • /
    • pp.117-121
    • /
    • 2003
  • In this paper, a micromachined low-loss and ultra wide band reflection-type phase shifter (RTPS) is proposed. The phase shifter shows a constant phase shift from 5 to 17 GHz and consists of two cascaded reflection-type phase shifter. Low-loss reflection termination consists of digital capacitive switches, and air-gap overlay CPW couplers are used in order to employ the low-loss 3 dB coupling. The fabricated phase shifter showed the 5 discrete states, $0^{\circ},{\;}22.5^{\circ},{\;}45^{\circ},{\;}67.5^{\circ},{\;}90^{\circ}$ respectively, the average insertion loss of 3.48 dB, and maximum rms phase error of ${\pm}1.80^{\circ}$ for the relative phase shift from $0^{\circ}{\;}to{\;}90^{\circ}$ over 5-17 GHz.

  • PDF

DTV(Digital TV) 수신 모듈용 광대역 가변 위상기의 설계 (Design of the Broad Band Phase Shifter for DTV Receiver)

  • 한기진;김종필;나형기
    • 한국전자파학회논문지
    • /
    • 제14권3호
    • /
    • pp.296-303
    • /
    • 2003
  • 본 논문에서는 DTV(Digital TV) 수신 모듈에 적용되는 반사형 가변 위상기의 설계를 위한 설계식을 제안하고 이를 이용해 DTV 수신대역인 470 MHz에서 860 MHz까지 180$^{\circ}$ 이상의 위상 가변특성을 만족하는 가변 위 상기를 설계하였다. 제시된 설계식을 이용하여 원하는 위상 가변 범위와 삽입손실을 만족하는 반사형 가변 위상의 체계적인 설계가 가능하며, 제작된 가변 위상기가 주어진 사양을 만족함을 확인할 수 있었다.

가변 캐패시터와 Branch Coupler를 이용한 반사형 아날로그 위상 변위기 연구 (A Study on the Reflection Type Analog Phase Shifter using Varactor and Branch Coupler)

  • 유강희
    • 한국통신학회논문지
    • /
    • 제29권3A호
    • /
    • pp.311-317
    • /
    • 2004
  • Varactor 다이오드와 branch coupler를 이용한 반사형 아날로그 위상 변위기 설계에 대하여 기술하였다. 1단의 위상 변위기로 위상 변위를 크게 하기 위하여 마이크로 스트립 stub기법을 사용하였으며 2.260GHz 주파수대에서 제작 결과 170$^{\circ}$의 위상이 변화함을 확인하였다. 측정된 삽입손실을 3㏈ 이하이었고. 반사 손실은 12㏈ 이상이었다. 본 논문에서는 설계 기법과 제자 및 실험 결과를 상세히 기술하였다.

강유전체 위상 변위기를 위한 Reactive Circuit 설계 및 구현 (Design and Implementation of Reactive Circuit for Ferroelectric Phase Shifter)

  • 김영태;문승언;이수재;김선형;박준석;조홍구
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.286-288
    • /
    • 2003
  • In this paper, in order to obtain a large differential phase shift with a little change in applied voltage, a ferroelectric reflective load circuit has been designed on top of barium strontium titanate $(Ba,Sr)TiO_3$ [BST] thin film. The design of the ferroelectric reflection-type phase shifter is based on a reflection theory of terminating circuit, which has a reflection-type analogue phase shifter with two ports terminated in symmetric phase-controllable reflective networks. To achieve large amounts of phase shift in low bias-voltage range, the effects of change of capacitance and transmission line connected with two coupled ports of a 3-dB $90^{\circ}$ branch-line hybrid coupler have been investigated. A large phase shift with a small capacitance change in the parallel terminating circuit has been demonstrated in the paper.

  • PDF

2-6 GHz 디지털 위상변위기 모듈 (2-6 GHz Digital Phase Shifter Module)

  • 정명득;소준호;우병일;임중수;이상원;박동철
    • 대한전자공학회논문지TC
    • /
    • 제39권3호
    • /
    • pp.158-164
    • /
    • 2002
  • 2-6 GHz 디지털 위상변위기 모듈을 설계, 제작하였다. 위상변위기 모듈에 사용된 MMIC 칩은 광대역을 구현하기 위해 Lange 커플러로 구성된 반사형 회로를 이용하여 설계 및 제작하였다. 위상변위기 모듈은 6.1°RMS 위상오차, 13.5 dB 최대 삽입손실과 각각, 8 dB와 10 dB의 입·출력 반사손실 특성을 갖는다. 32개의 위상 상태를 측정하기 위해서 컴퓨터를 사용하여 측정을 자동화 시켰다. 8×8 위상배열용 모듈들간의 RMS 삽입 위상오차는 최대 ±0.5°이내이고, 모듈들간의 평균 삽입손실 편차는 최대 ±0.5 dB를 넘지 않았다. 제작된 위상변위기 모듈의 크기는 45 × 22.5 × 60 ㎣. 이다.

수평형 p-i-n 광다이오드의 제작, 특성 측정 및 광제어 스터브 장착 위상기의 설계 (Fabrication and Characterization of Lateral p-i-n photodiodes and design of stub mounted optically controlled phase shifter)

  • 한승엽;정상구
    • 전자공학회논문지A
    • /
    • 제32A권1호
    • /
    • pp.89-96
    • /
    • 1995
  • Lateral p-i-n photodiodes have been fabricated, electrically tested, and incorporated into microwave control circuits such as an optically excited microwave atttenuator and reflection type phase shifter. Circuit design procedures for the loaded-line phase shifter with the optically controlled p-i-n photodiode are presented. The equal loss loading mode presented for the first time for the phase shifter circuits with lossy load allows an equal insertion loss of the phase shifter in both of its phase states. It is found that the insertion loss of the equal loss loading mode phase shifter constructed with the fabricated p-i-n photodiode load are about 3dB for 11.25$^{\circ}$ bit and 1dB for 5.625$^{\circ}$ bit for the frequency range of 2GHz to 11GHz.

  • PDF

위상특성을 개선시킨 2 Bits MMIC 위상변위기 (2 Bits MMIC Phase Shifter Improving the Phase Characteristic)

  • 정명득
    • 대한전자공학회논문지TC
    • /
    • 제40권9호
    • /
    • pp.392-397
    • /
    • 2003
  • Lange 커플러를 이용한 반사구조 위상변위기는 광대역에서 위상변이를 얻는데 사용되는 회로이다. 이런 5-비트 반사구조에서 33.75°는 대개 11.25°와 22.5°를 동시에 "on"시켜서 얻는 방법이 사용되어져 왔다. 본 논문은 33.75° 위상특성을 개선하기 위하여 GaAs PM 다이오드와 리액티브 부하로 구성된 별도의 회로를 제안하였으며 MMIC로 구현하였다. 2-6 GHz에서 제안된 회로는 기 발표 논문에 비하여 33.75°를 기준으로 할 때 평균 4.7° 개선된 특성을 얻었다. 기존 회로와 비교할 때 삽입손실 및 반사손실은 거의 변화가 없었다.

Lange 커플러를 이용한 MMIC 위상변위기 특성 (The Characteristics of MMIC Phase Shifter with Lange Coupler)

  • 정명득;박동철
    • 한국전자파학회논문지
    • /
    • 제14권2호
    • /
    • pp.104-110
    • /
    • 2003
  • 광대역에서 동작되는 간단한 180$^{\circ}$ MMIC 위상변위기를 제안하였다. 제안된 회로는 1개의 Lange 커플러와 2개의 PIN 다이오드만으로 구성되어 있다. 2-6 GHz 대역에서 측정된 위상변위기는 최대 위상오차가 13$^{\circ}$이며 3.2 dB의 최대 삽입손실과 6.3 dB의 최소 반사손실을 보였다.

마이크로파 광대역 정위상기 (Microwave Wideband Constant Phase Shifter)

  • Bae, Jung-Yi
    • 대한전자공학회논문지
    • /
    • 제23권2호
    • /
    • pp.182-188
    • /
    • 1986
  • A method of wideband constant phase control is proposed. This can be applied to reflection type phase shifter with p-i-n diode. Using the proposed method, a microwave phase network which consists of a transmission line and reactive circuit element is suggested. By determining theproper values of design parameters, the desired wideband constant phase with different specification can easily be designed. Also, using the proposed method, the parameters variation, and 1.1 dB of insertion loss in the range of 12% bandwidth.

  • PDF