• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.125-134
• /
• 2003

This paper describes on the design of Passive-type Radar Reflector for small Ship (PRR-S) based on the newly revised 2000 SOLAS regulations. The design idea, adopted in the study, is to hold PRR-S in the proper ‘catch rain’ position to avoid fluctuations of Radar Cross Section (RCS) due to ship's heeling. The PRR-S consists of octahedral-type radar reflector with circular plates and three-axis gimbaled stabilizer with weight on the bottom of outer gimbal ring. Performance test for the PRR is carried out in an anechoic chamber. The test results show that the reflected radar signal from PRR-S is more uniformly distributed than the reference model (Davis Echomaster).

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.1
• /
• pp.245-252
• /
• 2014

Human METCAM/MUC18, a cell adhesion molecule (CAM) in the immunoglobulin-like gene super family, plays a dual role in the progression of several epithelium cancers; however, its role in the nasopharyngeal carcinoma (NPC) remains unclear. To initiate the study we determined human METCAM/MUC18 expression in tissue samples of normal nasopharynx (NP), NPCs, and metastatic lesions, and in two established NPC cell lines. Immunoblotting analysis was used for the determination in lysates of frozen tissues, and immunohistochemistry (IHC) for expression in formalin-fixed, paraffin-embedded tissue sections of 7 normal nasopharynx specimens, 94 NPC tissue specimens, and 3 metastatic lesions. Human METCAM/MUC18 was expressed in 100% of the normal NP, not expressed in 73% of NPC specimens (or expressed at very low levels in only about 27% of NPC specimens), and expressed again in all of the metastatic lesions. The level of human METCAM/MUC18 expression in NPC tissues was about one fifth of that in the normal NP and metastatic lesions. The low level of human METCAM/MUC18 expression in NPC specimens was confirmed by a weak signal of RT-PCR amplification of the mRNA. Low expression levels of human METCAM/MUC18 in NPC tissues were also reflected in the seven established NPC cell lines. These findings provided the first evidence that diminished expression of human METCAM/MUC18 is an indicator for the emergence of NPC, but increased expression then occurs with metastatic progression, suggesting that huMETCAM/MUC18, perhaps similar to TGF-${\beta}$, may be a tumor suppressor, but a metastasis promoter for NPC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.344-346
• /
• 2018

Air pollution has become a social issue. Particularly, interest in fine dust is increasing. Various kinds of sensors are being used to measure fine dust. The most commonly used infrared detection dust sensors operate by sensing the diffraction of light through an infrared receiver and sensing the light reflected by the dust in the air. However, this method has a drawback in which accurate data analysis is difficult due to deviation caused by the noise during measurement. In order to overcome such drawbacks, in this thesis, a low pass filter algorithm of FIR(Finite Impulse Response) filter was designed and implemented.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.397-404
• /
• 2020

In this paper, the propagating-wave attenuation characteristics at 1, 3, and 6 GHz in the open environment roadway where the ground-reflected wave dominates are analyzed through a propagation model simulation using a ray-tracing method and propagation measurements. Simulations has been performed by varying the ground material, the transmitting antenna height, and the receiving antenna height. The measurements were conducted using a directional transmission antenna installed at 10 m mast and a omnidirectional receiving antenna installed at 1.5 m mast in an open environment. Comparison of simulation and measurement results confirms that the null points having the weak signal strength depend on those parameters. Although this research has been investigated for the wide road, the derived result could be useful for installing the transmitter and receiver in the roadway open environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.930-937
• /
• 2014

Inverse synthetic aperture radar (ISAR) images can be generated by radar which radiates the electromagnetic wave to a target and receives signal reflected from the target. ISAR images can be widely used to target detection and recognition. This paper proposed a method of generation of high resolution ISAR images by synthesizing frequency spectrums of each stepped chirp waveform in one burst and sub-sampling in frequency domain. This process is performed over entire bursts during coherent processing interval. Conventional ISAR image generation method using stepped frequency waveform has a severe problem of short unambiguous range, loading to ghost phenomenon. However, this problem can be resolved by the proposed method. In simulations, we generate high resolution ISAR image of the moving target which is Boeing-737 aircraft model composed of several ideal point scatterers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.217-223
• /
• 2013

Population aging is a shift in the distribution of a country's population towards older ages. This is usually reflected in an increase in the population's mean and median ages, a decline in the proportion of the population composed of children, and a rise in the proportion of the population that is elderly. Population ageing is widespread across the world. Barrier-free or Design for All concept consists of modifying buildings or facilities so that they can be used by people who are disabled or have physical impairments. Design for All criteria are aimed at ensuring that everyone can participate in the Information society. Safety-related products being easy to adapt according to different needs, or using standardized interfaces that can be accessed simply by using assistive technology. To this end, policy makers and service providers, especially in the ubiquitous technologies, produce new technologies, products, services and applications for pedestrians.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.373-383
• /
• 2008

LiDAR, unlike satellite imagery and aerial photographs, which provides irregularly distributed three-dimensional coordinates of ground surface, enables three-dimensional modeling. In this study, urban area was classified based on 3D information collected by LiDAR. Morphological and spatial properties are determined by the ratio of ground and non-ground point that are estimated with the number of ground reflected point data of LiDAR raw data. With this information, the residential and forest area could be classified in terms of height and density of trees. The intensity of the signal is distinguished by a statistical method, Jenk's Natural Break. Vegetative area (high or low density) and non-vegetative area (high or low density) are classified with reflective ratio of ground surface.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1044-1053
• /
• 2010

Transmitting correct train control information is important in a train control system which demands safety. The train control information includes the maximum speed of trains, position of preceding trains, incline of tracks and curve sections etc. A radio frequency-communication based train control system is influenced by the noise and interference because the train control information is transmitted by wireless between a on-board system and wayside system. The radio frequency-communication based train control system is a mobile communication system due to moving trains. The inter symbol interference(ISI) occurs by the multipath fading in the mobile ommunication system. As signal-to-noise ratio(SNR) is decreased by the ISI, the train control information is not received correctly. In case of tunnel section, numerous reflected waves exist. Therefore, the power density of receiver is decreased by difference among the received times, magnitudes, phases through the multipath. So, the train suddenly is stopped by the fail-safe operation in the train control system on account of decreasing the power density of receiver. In this paper, a line of sight model-(Additive White Gaussian noise(AWGN) channel), rayleigh and rician fading model are presented. Probability density functions which are related to the SNR are derived from the models. The fading phenomenon severely occurs as a result of analyzing the probability density functions. So, the space diversity method is used in order to reduce the fading effect and it is demonstrated by using Matlab program.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.1
• /
• pp.11-18
• /
• 2006

Man has always striven to create a thermally comfortable environment. This is reflected in building traditions around the world - from ancient history to present day. Today, creating a thermally comfortable environment is still one of the most important parameters to be considered when designing buildings. It is defined in the ISO 7730 standard as being "That condition of mind which expresses satisfaction with the thermal environment". A definition most people can agree on, but also a definition is not easily converted into physical parameters. Thermal comfort is a matter of many physical parameters, and not just one, as for example the air temperature that is set by air-conditioner. The most important matter Today's common offices and homes are only depending on air-conditioning as a cooling system during the summer. This kind of system tends to be focused on the person who controls it and those who are around the air-conditioner while thermal-comfort is neglected. Futhermore, the people's body conditions are not considered during each time that beginning, middle, last of the air-conditioning which causing displeasure of the residents more and more. This kind of operating system is set for a long time may causes unbalanced air condition and man's psychologic displeasure goes to increase.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.78-87
• /
• 2016

Red blood cells (RBCs) are customarily adhered to a bio-functionalised substrate to make them stationary in interferometric phase-imaging modalities. This can make them susceptible to receive alterations in innate morphology due to their own weight. Optical tweezers (OTs) often driven by Gaussian profile of a laser beam is an alternative modality to overcome contact-induced perturbation but at the same time a steeply focused laser beam might cause photo-damage. In order to address both the photo-damage and substrate adherence induced perturbations, we were motivated to stabilize the RBC in OTs by utilizing a laser beam of ‘arbitrary intensity profile’ generated by a source having cavity imperfections per se. Thus the immobilized RBC was investigated for phase-imaging with sinusoidal interferograms generated by a compact and robust Michelson interferometer which was designed from a cubic beam splitter having one surface coated with reflective material and another adjacent coplanar surface aligned against a mirror. Reflected interferograms from bilayers membrane of a trapped RBC were recorded and analyzed. Our phase-imaging set-up is limited to work in reflection configuration only because of the availability of an upright microscope. Due to RBC’s membrane being poorly reflective for visible wavelengths, quantitative information in the signal is weak and therefore, the quality of experimental results is limited in comparison to results obtained in transmission mode by various holographic techniques reported elsewhere.