• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.59-72
• /
• 2017

As the part of study which handles the measure to use the individual vehicle information of taxi GPS data on signal controls in order to overcome the limitation of Loop detector-based collecting methods of real-time signal control system, this paper conducted series of evaluations and improvements on link travel time, queue vehicle time estimates and traffic condition decision algorithm from the research introduced in 2016. considering the control group and the other, the link travel time has enhanced the travel time and the length of queue vehicle has enhanced the estimated model taking account of the traffic situation. It is analyzed that the accuracy of the average link travel time and the length of queue vehicle are respectably both approximately 95 % and 85%. The traffic condition decision algorithm reflected the improved travel speed and vehicle length. Smoothing was performed to determine the trend of the traffic situation and reduce the fluctuation of the data, and the algorithms have refined so as to reflect the pass period on overflow judgment criterion.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.380-386
• /
• 2006

Electric fuel sender fur the vehicle fuel gauge system was designed and fabricated based on the CPW(Co-Planer Waveguide) transmission line theory. It is applied on this system that characteristic impedance of RF transmission line can be varied by the surrounded material of the line. By the characteristic impedance owing the level of gasoline or diesel fuel in vehicle fuel tank, CPW line has corresponding reflected signal as much as changed impedance. Detected signal is amplified, and delivered to fuel indicator into cluster unit on dash board. Conventional floating mechanical buoy level gauge has several defects as low reliability and high break down rate by mechanical operation, and has not good linearity for the fuel level difference. CPW line with electric circuits are constructed on 1.6 mm thickness epoxy substrate, and measurement shows that this system has more accurate level and better linearity than conventional mechanical system. New electric fuel sender which has good productivity with long lifetime and low-in-cost by the SMT chip assembling could be replaced this system with conventional floating buoy system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2008

This paper presents the reflection and transmission measurements conducted at the 60GHz suitable to provide a high speed wide band service. Mean received power and standard deviation are calculated and used to compare the characteristics of radio wave propagation to the various obstacles between transmitting and receiving antennas at the frequency. The results show that the transmitted signal strength by the steel door and copper plate are about 40dB lower than in free space, those by the rubber plate, glass and styroform are about 3dB lower than in free space. Also, the re(looted signal strengths at the 60 degree grazing angle show that in case by the partition is about 23dB lower, by the surface of a wall is about 6dB lower than by the copper plate. The presented results can be used for the design of 60 GHz picocell communication network that the reflected and transmitted waves affect to the service area.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.2
• /
• pp.161-168
• /
• 2021

In this paper, a Silent Speech Interface (SSI) technology was proposed in which Doppler frequency shifts of the reflected signal were used to synthesize the speech signals when 40kHz ultrasonic signal was incident to speaker's mouth region. In SSI, the mapping rules from the features derived from non-speech signals to those from audible speech signals was constructed, the speech signals are synthesized from non-speech signals using the constructed mapping rules. The mapping rules were built by minimizing the overall errors between the estimated and true speech parameters in the conventional SSI methods. In the present study, the mapping rules were constructed so that the distribution of the estimated parameters is similar to that of the true parameters by using Generative Adversarial Networks (GAN). The experimental result using 60 Korean words showed that, both objectively and subjectively, the performance of the proposed method was superior to that of the conventional neural networks-based methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1935-1941
• /
• 2021

In order to develop an algorithm using deep learning, which has been recently applied to various fields, it is necessary to have rich, high-quality learning data. In this paper, we propose an acquisition system for biological signals that simultaneously collects bio-signal data such as optical videos, thermal videos, and voices, which are mainly used in developing deep learning algorithms and useful in derivation of information, and transmit them to the server. To increase the portability of the collector, it was made based on Raspberry Pi, and the collected data is transmitted to the server through the wireless Internet. To enable simultaneous data collection from multiple collectors, an ID for login was assigned to each subject, and this was reflected in the database to facilitate data management. By presenting an example of biological data collection for fatigue measurement, we prove the application of the proposed acquisition system.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.694-706
• /
• 2022

This study focusses on the development of a motion-sensing smart leggings prototype with the help of a module that monitors motion using a fiber-type stretch sensor. Additionally, it acquires data on Electrocardiogram (ECG), respiration, and body temperature signals, for the development of smart clothing used in online exercise coaching and customized healthcare systems. The research process was conducted in the following order: 1) Fabrication of a fiber-type elastic strain sensor for motion monitoring, 2) Positioning and attaching the sensor, 3) Pattern development and three-dimensional (3D) design, 4) Prototyping 5) Wearability test, and 6) Expert evaluation. The 3D design method was used to develop an aesthetic design, and for sensing accurate signal acquisition functions, wearability tests, and expert evaluation. As a result, first, the selection or manufacturing of an appropriate sensor for the function is of utmost importance. Second, the selection and attachment method of a location that can maximize the function of the sensor without interfering with any activity should be studied. Third, the signal line selection and connection method should be considered, and fourth, the aesthetic design should be reflected along with functional verification. In addition, the selection of an appropriate material is important, and tests for washability and durability must be made. This study presented a manufacturing method to improve the functionality and design of smart clothing, through the process of developing a prototype of motion-sensing smart leggings.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.210-217
• /
• 2022

Passive source depth estimation has been studied for decades since the source depth can be used for target classification, target tracking, etc. The purpose of this paper is to solve the problem of ambiguity in the previous paper [S.-il. Cho et al. (in Korean), J. Acoust. Soc. Kr. 38, 120-127 (2019)] that source depth is estimated in two points. The patterns of phase shift of Channel Impulse Response(CIR) reflected in ocean surface and bottom is used for removing ambiguity of the source depth estimation, and after removing ambiguity, source depth is estimated at one point through the intersection of CIR. In order to extract CIR in case of unknown source signal and continuous signal or noise, Ray-based blind deconvolution is used. The proposed algorithm is demonstrated through numerical simulation in ocean waveguide.

• Smart Media Journal
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2023

Design-For-Security (DFS) methodology is to protect integrated circuits from physical attacks, and that can be implemented by adding a security circuit to detect abnormal external access. Among the abnormal accesses called invasive attack, microprobing and FIB circuit editing are classified as the most powerful methods because they have direct access. Microprobing deliberately inject defects into the wire of circuit through probes, or reads and changes data. FIB circuit editing is methods of reconnecting or destroying circuits to neutralize security circuits or to access data. Previous DFS methodology have responded to the attacks by detecting arrival time asymmetry between the two signals or by comparing input/output data based on encrypted communication. This study conducted to reduce hardware overhead, and the proposed circuit detects the reflected signal asymmetry generated through probe or FIB circuit editing and detects the attacks through comparison. Since the proposed security circuit reduces the size and test cycle of the circuit compared to previous studies, the cost used for security can be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.627-635
• /
• 2017

Modern warfare is gradually changing into a network war, and information electronic warfare is also progressing. In modern war, electronic warfare is all military activity concerned with electromagnetic field use, such as signal collecting, communication monitoring, information analysis, and electronic attack. The one key function of signal collecting for enemy signal analysis, direction finding, collects the signal radiated from enemy area and then calculates the enemy direction. This paper examined the Watson-Watt algorithm for an amplitude direction finding system and CVDF algorithm for phase direction finding system and analyzed the difference in the direction finding accuracy between in the clean electromagnetic field environment and in the real operating field environment of electronic warfare system. In the real field, the direction finding accuracy was affected by the reflected field from the surrounding obstacles. Therefore, this paper proposesan enhanced direction finding process for reducing the effect. The result of direction finding by applying the proposed process was enhanced above $1.24^{\circ}$ compared to the result for the existing process.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2009

In this paper, a 2.4 GHz doppler radar system consisting of a doppler radar sensor and a baseband module were designed to detect heart beat and respiration signal without direct skin contact. The doppler radar system emits RF signal of 2.4 GHz toward human chest, and then detects phase modulation of the reflected signal so as to investigate cardiopulmonary activities. The heartbeat and respiration signals acquired from I/Q channels of the doppler radar system are applied to the pre-processing circuit, the amplification circuit, and the offset circuit of the baseband module. The designed system was tested on mouse, rabbit and mankind, which have different range of heart rates and respiration signals, to evaluate detection accuracy of the system. ECG acquisition system and respiration transducer were used to generate the reference signal. In our experiments, a performance of detection were found to be high in the case that the subject stays still. In this paper, we confirmed that non-contact heart beat and respiration detection using the doppler radar has the possibility and limitation according to distance, cardiopulmonary activities, range of heart rates and respiration.