• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.6
• /
• pp.353-359
• /
• 2016

In this paper, we propose a high performance L1 cache structure for the high clock CPU. The proposed cache memory consists of three parts, i.e., a direct-mapped cache to support fast access time, a two-way set associative buffer to reduce miss ratio, and a way-select table. The most recently accessed data is stored in the direct-mapped cache. If a data has a high probability of a repeated reference, when the data is replaced from the direct-mapped cache, the data is stored into the two-way set associative buffer. For the high performance and fast access time, we propose an one way among two ways set associative buffer is selectively accessed based on the way-select table (WST). According to simulation results, access time can be reduced by about 7% and 40% comparing with a direct cache and Intel i7-6700 with two times more space respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.281-285
• /
• 1990

Our N.C. sewing machine is a device that acts sewing automatically in reference to N.C. data made by data input device. Our N.C. sewing mechine is composed of induction motor that has electric clutch and brake, step motor that drives x-y table. Sewing area of our machine is 170 mm * 100 mm, maximum sewing speed is about 2000 spm, maximum stitch length 6.2 mm. In actual sewing, synchronization between motion of needle up-down and motion of x-y table is a critical factor. In this paper, technology about synchronization will be profoundly discussed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1124-1136
• /
• 2017

Direct Power Control technique has become popular in the grid connected Voltage Source Converter (VSC) applications due to its simplicity, direct voltage vector selection and improved dynamic performance. In this paper, a direct method to determine the effect of voltage vector on the instantaneous active and reactive power variations is developed. An alternative Look Up Table is proposed which minimizes the commutations in the converter and results in minimum reactive power variation. The application of suggested table is established for Shunt Active Power Filter (SAPF) application. The Predictive Direct Power Control method, which minimizes apparent power variation, is further investigated to reduce commutations in converters. Both the methods are validated using 2 kVA laboratory prototype of Shunt Active Power Filters (SAPF).

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.818-830
• /
• 2000

Automation tools for program analysis are needed in order to program understand and maintain, extract the characteristics of object-oriented program such as class name, member function and data member. In this paper, we carried out design and implementation of the automation tool for effective maintenance of object-oriented software. Being based on Reverse Engineering, this approach extracts class relationship information from C++ source code and generates object-oriented model of class diagram using UML as the standard object-oriented methodology. Therefore, this paper provides developers visualized including class information, definitions of classes, inheritance relationships, set relationships, and simple reference relationships. Finally in this paper, we propose a method that construct class relationship information to table in analysis state and make form of table construction to link form so tat developers can perform understanding and maintaining program efficiently. And this method enable to restructure and reuse in object-oriented model.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.157-163
• /
• 1997

In the case of direct connecting the nut of ballscrew to guide table, machining error and misalignment of ballscrew largely affect to the motional accuracy of guideway. For decreasing these influences, two type of floating couplings: leaf spring type and hybrid type which releases the table from nut of ballscrew except feed and rotational direction is proposed in this study. In order to verify practical availability of the proposed floating couplings, motional accuracy, dynamic characteristics and micro step response of hydrostatic guideway, mounted with each type of couplings are tested. The conventional fixed type coupling is also tested as the reference in characteristics. From the results of experiments, it is proved that the hybrid type coupling is superior to other couplings and is available to high precision feeding system with ballscrew.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.1
• /
• pp.92-99
• /
• 2004

In this paper, the decoupled neural network reference compensation technique (DRCT) is applied to the control of a two degrees-of-freedom inverted pendulum mounted on an x-y table. Neural networks are used as auxiliary controllers for both the x axis and y axis of the PD controlled inverted pendulum. The DRCT method known to compensate for uncertainties at the trajectory level is used to control both the angle of a pendulum and the position of a cart simultaneously. Implementation of an on-line neural network learning algorithm has been implemented on the DSP board of the dSpace DSP system. Experimental studies have shown successful balancing of a pendulum on an x-y plane and good position control under external disturbances as well.

• IE interfaces
• /
• v.4 no.2
• /
• pp.1-12
• /
• 1991

This paper deals with the development of a computer aided fixture planning system that automatically selects set-ups, set-up sequence and fixture design for prismatic parts. This study presents the hierarchical data structure for feature-based part model and the preprocessing procedure for the proposed system. The preprocessing procedure generates tools such as DDR(Degree of Dimensional Relationship), AMV(Admissible Misalignment Value) and the datum reference frame of each feature according to the proposed decision table. The proposed system is called AFIX(Automated FIXture planning system) which is implemented by using C language on the workstation. A case study for a cavity plate is presented to show the performance of the AFM.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.31-38
• /
• 2002

A method of DID generating step is suggested for applying the XML technology to the information data extracted from the Legacy databases. The IDREF-ID attribute reference modeling is used for representing the complex relationship between tables and excluding the prearranged step of ID insertion. ID Insertion procedure is performed in parallel with investigating the relationship between the tables and the frequent search direction between the table data. As a result, ID insertion procedure can be performed simultaneously with understanding of the IDREF-ID relationship between tables, and DID are also generated.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3196-3198
• /
• 1999

In this paper, we are proposed ATM AAL 1 source clock recovery methods for CBR service. The proposed method compute the difference between network clock level and the reference level by inspecting the variation of a buffer. Also it is the service clock recovery method that control local clock using the look-up table defined clock dividing rate of the difference in advance. It can be applicable to both SDH network and PDH network which has no common reference clock between its ends, it has an important mean in view of the internetworking between existing networks for the integrated service chased by B_ISDN.

• Journal of Biomedical Engineering Research
• /
• v.12 no.1
• /
• pp.49-56
• /
• 1991

In this paper, a method for camera position estimation in gasher using elechoendoscopic image sequence is proposed. In orders to obtain proper image sequences, the gasser in divided into three sections. It Is presented thats camera position modeling for 3D information extvac lion and image distortion due to the endoscopic lenses is corrected. The feature points are represented with respect to the reference coordinate system below 10 percents error rate. The faster distortion correction algorithm is proposed in this paper. This algorithm uses error table which is faster than coordinate transform method using n -th order polynomials.