• Investigative Magnetic Resonance Imaging
• /
• v.17 no.1
• /
• pp.19-25
• /
• 2013

Purpose : Renal blood oxygen level-dependent (BOLD) MRI has been used in the evaluation of renal oxygenation. We tried to provide the normal $R2^*$ value of the human kidney with 3.0 T, and evaluated the differences in $R2^*$ values according to gender and location. Materials and Methods: Twenty-four healthy volunteers underwent BOLD MRI at 3.0 T. Multi gradient echo-echo planar imaging sequence with seventeen echoes was used. After generation of the $T2^*$ map, the $R2^*$ was calculated. The statistical differences in $R2^*$ values between the cortex and medulla, males and females, and the right and left kidney were analyzed. The regional differences of $R2^*$ within the both kidneys were evaluated respectively. Results: BOLD MRI was successful in all participants. No gross artifact interfered with $R2^*$ measurement. The mean $R2^*$ at 3.0 T was $17.1{\pm}2.60s^{-1}$ in the cortex and $27.7{\pm}4.83s^{-1}$ in the medulla (p < 0.001). The $R2^*$ value in the medulla was significantly higher in the male than female volunteers (p = 0.025). There were no statistical differences of $R2^*$ according to the side and location in the kidney (p = 0.197). Conclusion: Renal BOLD MRI can be efficiently performed with 3.0 T MRI. Renal medullary hypoxia is present in normal volunteers. Our results may be used as reference values in the evaluation of pathologic conditions using BOLD MRI.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.1-13
• /
• 2014

As part of reconsideration on naming of the scenic site No.1 "Myeongju Cheonghak-dong Sogumgang," this study attempts to identify whether there is any mistake with reference to place naming of Korea's No.1 scenic site and if so, to correct the problem by examining the origin of the name and its transition progress through analysis and interpretation of old maps, ancient documents such as traditional geographic books, Yusangi(遊山記) and Letters Carved on the Rocks. The findings of this study are as follows: In traditional geographic books, a term of 'Mt. Cheonghak(靑鶴山)' was first found from "SinjungDonggookyeojisungram(新增東國輿地勝覽)" and after a place name, 'Sogumgang(小金剛)' first appeared in "Yeojidoseo(輿地圖書)" in the middle of the 17th century, it was reproduced in "Jungsuimyeongji(增修臨瀛誌)", which was published in the early 20th century. However, as a result of analyzing old maps, the place name, Sogumgang cannot be found in any local or national map except place names such as Cheonghak-dong, Mt. Cheonghak and Temple Cheonghak. Even though 'Biseonam,' 'Cheonyudong,' 'Gyeongdam' and 'Mt. Cheonghak' appear in Yulgok's "Yucheonghaksangi(遊靑鶴山記)", any part in which 'Sogumgang' was referred is not found. Later, Cheonghak-dong Sogumgang seemed to had been called 'Mt. Cheonghak' or 'Cheonghak-dong(靑鶴洞)' for more than three centuries as seen in Lee Sun-il's "Godamilgo(孤潭逸稿)", Heo Geun's farewell records, Heo Mok's "Cheonghak-dong Guryongyeongi(靑鶴洞九龍淵記)", Yoon Sun-geo(尹宣擧)'s "Padongilgi(巴東日記)" and Lee Won-jo's letters and a poem composed by Gang Jae-hang in the middle of the 18th century is the only record in which the place name, 'Sogumgang' is shown. Meanwhile, 'Sogumgang' carved on Inung Rock(二能巖) in front of Temple Gumgang is presumed to be carved by Inunggyeoone(二能契員) in the 1870s or in 1930s, considering the size of each character, calligraphy, overall layout, wear extent and records in Jiriji. Therefore, no evidence can be found to say that each character of 'Sogumgang' was written by Yulgok because 'Sogumgang' has strong evidences of the origin of its place name. To sum up the findings stated above, since Yulgok's "Yucheonghaksangi", this place seems to have been referred as 'Mt. Cheonghak Cheonghak-dong' and as it is confirmed that the place name, 'Sogumgang' first appeared in "Ohyeongosijo(五言古時調)" of "Ibjaeseonsangyugo(立齋先生遺稿)" and "Yeojidoseo" in the middle of the 18th century, it can be inferred that the place name, Sogumgang had been partly mingled as an another name of Mt. Cheonghak. Therefore, even though it is difficult to say the existing place name has a significant problem, it is thought that it will be better to name 'Mt. Cheonghak Cheonghak-dong' rather than 'Cheonghak-dong Sogumgang' in order to stress on this place's traditional identity as a scenic site related to Yulgok. In addition, as confirmed in this study process, it is said that each character of place names, 'Mt. Cheonghak' and 'Gyeongdam(鏡潭)' and name 'Yoon Sun-geo' carved in Rock Sikdang stated in Yoon Sun-geo's "Padongilgi" in 1964 is a pledge showing the influence of "Yucheonghaksangi" as an ancient travel literature as well as a mark of the Giho school scholars' respect and spirit to honor Yulgok.

• Journal of the Korean Society of Radiology
• /
• v.14 no.2
• /
• pp.157-168
• /
• 2020

Advancements in segmentation methodology has made automatic segmentation of brain structures using structural images accurate and consistent. One method of automatic segmentation, which involves registering atlas information from template space to subject space, requires a high quality atlas with accurate boundaries for consistent segmentation. The Allen Mouse Brain Atlas, which has been widely accepted as a high quality reference of the mouse brain, has been used in various segmentations and can provide accurate coordinates and boundaries of mouse brain structures for tractography. Through probabilistic tractography, diffusion tensor images can be used to map comprehensive neuronal network of white matter pathways of the brain. Comparisons between neural networks of mouse and human brains showed that various clinical tests on mouse models were able to simulate disease pathology of human brains, increasing the importance of clinical mouse brain studies. However, differences between brain size of human and mouse brain has made it difficult to achieve the necessary image quality for analysis and the conditions for sufficient image quality such as a long scan time makes using live samples unrealistic. In order to secure a mouse brain image with a sufficient scan time, an Ex-vivo experiment of a mouse brain was conducted for this study. Using FSL, a tool for analyzing tensor images, we proposed a semi-automated segmentation and tractography analysis pipeline of the mouse brain and applied it to various mouse models. Also, in order to determine the useful signal-to-noise ratio of the diffusion tensor image acquired for the tractography analysis, images with various excitation numbers were compared.

• Journal of radiological science and technology
• /
• v.34 no.4
• /
• pp.323-331
• /
• 2011

We evaluated clinical usefulness of Arterial spin labeling perfusion MR imaging on the acute ischemic cerebral infarction patients through this study. We compared 22 patients who were done with DSC imaging and ASL imaging in admitted emergency room with acute ischemic cerebral infarction, with 36 normal comparison persons (DSC image on 21persons, ASL images on 15persons). Siemens Magnetom Verio 3.0T with 12 channel head coil was used for this study. DSC image obtained 4 maps(rCBV, rCBF, rMTT, TTP) through post-processing. For qualitative analysis we compared the area of lesion macro-diagonal with the size of diffusion weighted MR image for rMTT, TTP, rCBF, rCBV, ASL maps. For Quantitative analysis we analyzed significant correlations between less than 3 cm infarction group and normal comparison group using mean relative value of flowing image with Mann-Whitney U test. TTP(95.5%) and rCBF(95.5%) maps showed high recognition rate in qualitative analysis for >3cm infarction group. The rCBF and rCBV map tests were highly related with final stage stroke areas. Mean relative value of infarction group showed a significant correlations in quantitative analysis(p<0.05). As a conclusion, arterial spin labeling image showed high lesion recognition rate in the >3cm infarction group. Mean relative values in quantitative evaluation were used for reference data. If we do more sustainable researches, ASL image will be useful for an early diagnosis of cerebral infarction, determination of the range of ischemic pneumbra and effective treatments.

• Journal of Korea Port Economic Association
• /
• v.25 no.1
• /
• pp.15-28
• /
• 2009

The purpose of this paper is to show the empirical extraction way of benchmarking ports for overcoming the shortcoming which the traditional DEA method has by using 20 Korean ports in 2003 for 2 inputs (birthing capacity, cargo handling capacity) and 2 outputs(Export and Import Quantity, Number of Ship Calls). Because DEA method has produced the limited set of efficient units which are reference to inefficient units respective of their differences in efficiency scores, it is necessary to adopt the more feasible benchmarking information according to the path analysis(tier or stratification). The core empirical results of this paper are as follows. Benchmarking ports against inefficient ports according to the tier analysis are that Masan Port(Janghang$\rightarrow$Jeju$\rightarrow$Seogoipo$\rightarrow$Yeosu), Jinhae Port(Janghang$\rightarrow$Mogpo$\rightarrow$Seogoipo$\rightarrow$Wando), Pohang&DonghaePort(Janghang$\rightarrow$Samcheonpo$\rightarrow$Pyungtag$\rightarrow$Samcheog), and Sogcho Port(Janghang$\rightarrow$Mogpo$\rightarrow$Seogoipo$\rightarrow$Wando). The policy implication to the Korean seaports and planners is that Korean seaports should introduce the new methods like Tier analysis of this paper for evaluating the port performance and enhancing the efficiency in short term, mid term, and long term according to the tier 3 stage, the tier 2 stage, and the tier 1 stage with original DEA stage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.175-185
• /
• 2020

Three-dimensional registration is a process of matching data with or without a coordinate system to a reference coordinate system, which is used in various fields such as the absolute orientation of photogrammetry and data combining for producing precise road maps. Three-dimensional registration is divided into a method using points and a method using linear features. In the case of using points, it is difficult to find the same conjugate point when having different spatial resolutions. On the other hand, the use of linear feature has the advantage that the three-dimensional registration is possible by using not only the case where the spatial resolution is different but also the conjugate linear feature that is not the same starting point and ending point in point cloud type data. In this study, we proposed a method to determine the scale and the three-dimensional translation after determining the three-dimensional rotation angle between two data using quaternion to perform three-dimensional registration using linear features. For the verification of the proposed method, three-dimensional registration was performed using the linear features constructed an indoor and the linear features acquired through the terrestrial mobile mapping system in an outdoor environment. The experimental results showed that the mean square root error was 0.001054m and 0.000936m, respectively, when the scale was fixed and if not fixed, using indoor data. The results of the three-dimensional transformation in the 500m section using outdoor data showed that the mean square root error was 0.09412m when the six linear features were used, and the accuracy for producing precision maps was satisfied. In addition, in the experiment where the number of linear features was changed, it was found that nine linear features were sufficient for high-precision 3D transformation through almost no change in the root mean square error even when nine linear features or more linear features were used.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.144-161
• /
• 1990

Pine forest communities developed in Mt. Palgong, southeastern Korea, were studied phytosociologically, with special reference to multiple management of local forests, and were classified into two communities, Pinus densiflora - Quercus mongolica community(I : mountain forest) and P. densiflora-Climbing plants community (II : valley forest) and six subgroups accompanied by several subgroups. Judging from the coincidence method, the division of communities (vegetation units) was closely related to altitude and topography. Based on vegetation units, a vertical distribution map of pine forest communities was prepared. The species composition(%) of pine forest communities under stratification, in upper and lower tree layer, teas I higher than II, in middle and shrubs lacer II higher than I (Total : Upper 15.5%, Middle 28.4%, Lower 34.6%. Shrubs 21.5%. Sum of mean coverage%i of understory vegetation was II twice as high as I (Total. shrubs 28.4%. forbs 11.4%, Graminoids 11.8%, ferns 1.0%). Based on constance, coverage and d.b.h. class etc., an actual growth and occurrence table of tree species and understory vegetation by vegetation unity were prepared, and could assume a criterion for judging potential dominance-growth conditions.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.3-46
• /
• 2010

Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.18-26
• /
• 2021

Purpose: Generally, patients are noticed to store denture in water when removed from the mouth. However, few studies have reported the advantage of volumetric change in underwater storage over dry storage. To be a reference in defining the proper denture storage method, this study aims to evaluate the volumetric change and dimensional deformation in case of underwater and dry storage. Materials and methods: Definitive casts were scanned by a model scanner, and denture bases were designed with computer-aided design (CAD) software. Twelve denture bases (upper 6, lower 6) were printed with 3D printer. Printed denture bases were invested and flasked with heat-curing method. 6 upper and 6 lower dentures were divided into group A and B, and each group contains 3 upper and 3 lower dentures. Group A was stored dry at room temperature, group B was stored underwater. Group B was scanned at every 24 hours for 28 days and scanned data was saved as stereolithography (SLA) file. These SLA files were analyzed to measure the difference in volumetric change of a month and Kruskal-Wallis test were used for statistical analysis. Best-fit algorithm was used to overlap and 3-dimensional color-coded map was used to observe the changing pattern of impression surface. Results: No significant difference was found in volumetric changes regardless of the storage methods. In dry-stored denture base, significant changes were found in the palate of upper jaw and posterior lingual border of lower jaw in direction away from the underlying tissue, maxillary tuberosity of upper jaw and retromolar pad area of lower jaw in direction towards the underlying tissue. Conclusion: Storing the denture underwater shows less volumetric change of impression surface than storing in the dry air.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1285-1300
• /
• 2022

Turbidity, the measure of the cloudiness of water, is used as an important index for water quality management. The turbidity can vary greatly in small river systems, which affects water quality in national rivers. Therefore, the generation of high-resolution spatial information on turbidity is very important. In this study, a turbidity retrieval model using the Korea Multi-Purpose Satellite-3 and -3A (KOMPSAT-3/3A) images was developed for high-resolution turbidity mapping of Han River system based on eXtreme Gradient Boosting (XGBoost) algorithm. To this end, the top of atmosphere (TOA) spectral reflectance was calculated from a total of 24 KOMPSAT-3/3A images and 150 Landsat-8 images. The Landsat-8 TOA spectral reflectance was cross-calibrated to the KOMPSAT-3/3A bands. The turbidity measured by the National Water Quality Monitoring Network was used as a reference dataset, and as input variables, the TOA spectral reflectance at the locations of in situ turbidity measurement, the spectral indices (the normalized difference vegetation index, normalized difference water index, and normalized difference turbidity index), and the Moderate Resolution Imaging Spectroradiometer (MODIS)-derived atmospheric products(the atmospheric optical thickness, water vapor, and ozone) were used. Furthermore, by analyzing the KOMPSAT-3/3A TOA spectral reflectance of different turbidities, a new spectral index, new normalized difference turbidity index (nNDTI), was proposed, and it was added as an input variable to the turbidity retrieval model. The XGBoost model showed excellent performance for the retrieval of turbidity with a root mean square error (RMSE) of 2.70 NTU and a normalized RMSE (NRMSE) of 14.70% compared to in situ turbidity, in which the nNDTI proposed in this study was used as the most important variable. The developed turbidity retrieval model was applied to the KOMPSAT-3/3A images to map high-resolution river turbidity, and it was possible to analyze the spatiotemporal variations of turbidity. Through this study, we could confirm that the KOMPSAT-3/3A images are very useful for retrieving high-resolution and accurate spatial information on the river turbidity.