• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.469-477
• /
• 2012

This paper describes the characteristic analysis of ice impact force for the Arctic structure shape. In the present study an energy method has been used to predict the impact force during the ice-structure collision. This study also employs two concepts for reference contact area and normalized stress in analysis procedure. The influences of factors, such as impact velocity, full penetration depth, structure shape and ice floe size, are investigated. Full penetration occurs, particularly at lower impact velocity when ice thickness increase. But "typical size" ice floe does not expected ever to achieve full penetration during the impact procedure. The structure shape is the dominant factor in ice impact force characteristic. The results for various ice-structure collision scenarios are analyzed.

• ETRI Journal
• /
• 제39권6호
• /
• pp.859-865
• /
• 2017

This paper presents a method for determining the optimum active-area width (OAW) of solar cells in a module architecture. The current density-voltage curve of a reference cell with a narrow active-area width is used to reproduce the current density profile in the test cell whose active area width is to be optimized. We obtained self-consistent current density and electric potential profiles from iterative calculations of both properties, considering the distributed resistance of the contact layers. Further, we determined the OAW that yields the maximum efficiency by calculating efficiency as a function of the active-area width. The proposed method can be applied to the design of the active area of a dye-sensitized solar cell in Z-type series connection modules for indoor and building-integrated photovoltaic systems. Our calculations predicted that OAW increases as the sheet resistances of the contact layers and the intensity of light decrease.

• Journal of Korean Medical Science
• /
• 제33권51호
• /
• pp.332.1-332.8
• /
• 2018

Background: The trend of aging society is occurring globally, and with it, one of the health problems that is emerging is frailty. Efforts are being made to account for the increasing prevalence of frailty, and various modifiable factors are being considered in regards to frailty. Because social contact has shown beneficial effects in terms of health in previous studies, it is increasingly being considered in relation to frailty. The purpose of this study was to assess the association of different types of social contact with frailty status. Methods: A total of 1,200 Korean elders aged 70-84 years old were included in the study. Using Fried's Cardiovascular Health Study index to categorize the frailty status, the relationship between frailty status and frequency of contact (i.e., with family members, friends, or neighbors) was analyzed using multinomial logistic regression accounting for confounders. Results: Adjusting for all covariates, frequency of contact with friends was the most statistically significant. Less frequent contact was associated with a significantly higher odds of pre-frailty: monthly (odds ratio [OR], 2.02; 95% confidence interval [CI], 1.27-3.20), and rarely (OR, 1.87; 95% CI, 1.17-2.99), with daily contact group as reference. Also, those contacting friends monthly (OR, 5.04; 95% CI, 2.29-11.08) or rarely (OR, 3.23; 95% CI, 1.58-6.61) were more likely to be frail compared to the daily group. Conclusion: Frequency of social contact, especially with friends, is strongly associated with frailty.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.503-517
• /
• 2016

Objective: The aim of this study was to evaluate the effectiveness of 3 dimensional contoured pillow through analyzing contact pressure and to suggest its design guidelines through analyzing the posture of head and neck area. Background: The quality of sleep is a very important factor closely related with human's health. To improve the quality of sleep, the verification of design factors affecting the posture of the head and neck is needed, and a pillow design that can induce proper posture is required. Method: This study measured the contact pressures of the two reference groups (bead and cotton pillows) as a method to evaluate the design effectiveness of the contoured pillow. This study proposed 3-dimensional design guidelines by drawing anthropometry (head length) affecting cervical curvature angle (CCA) through the measurement of the participants' cervical curvature angles. Results: In the design effectiveness evaluation, the contact pressure of cervical region was higher than that of a reference group (cotton pillow), and contract area increased, and contract pressure decreased in the shape distributing the occipital region's body pressure. This study proposed pillow's cervical supporting height by percentile of a head length [head length (%tile) (cervical supporting height) affecting the posture of the head and neck: 14.6cm (5%tile) (6.2cm), 15.5cm (25%tile) (6.7cm), 16.4cm (50%tile) (7.1cm), and 19.3cm (75%tile) (8.9cm)]. Conclusion: This study confirmed the contoured pillow's design effectiveness maintaining cervical angle comfortable to sleep with the shape supporting the cervical vertebrae and by reducing the contact load of the occipital region. Also, this study proposed pillow design guidelines based on the 3-dimensional contoured pillow design effectiveness, through which the study laid the foundation for pillow design in a systematic method. Application: The results of this study are expected to be utilized as the basis data by which the optimum pillow type and pillow design according to main percentile can be standardized.

• 자원환경지질
• /
• 제6권4호
• /
• pp.195-200
• /
• 1973

Temperature environments of the formation of fluorite deposits in the Wolaksan area and the Cheonil Mine, Chungcheongbuk-Do are presented and interpreted in brief. These deposits occur more or less near the contact zone between the Paleozoic limestone formations and the Cretaceous biotite granites as a number of hydrothermal veins or replacement deposits. The homogenization temperatures of fluorite crystals from the Wolaksan area fall within the narrow range of $149{\sim}167^{\circ}C$, of which lower limit is quite high, while those of the Cheonil Mine show wide range of $126{\sim}177^{\circ}C$, which indicates much lower mean temperature of formation. If the possible correction for pressure, which may not exceed $+30^{\circ}C$ as the depth of the deposits was 1.5km, were applied, the possible highest value of the true formation temperatures of fluorites in both area might be reached to around $200^{\circ}C$ that means these deposits were formed as a series of early products of the epithermal stage of hydrothermal processes.

• 한국의류산업학회지
• /
• 제25권2호
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1031-1041
• /
• 2012

This study was carried out to investigate the characteristics of disinfection by-products (DBPs-trihalomethanes (THMs), haloacetic acids (HAAs) and haloacetonitriles (HANs) formation in chlorination of principal raw waters used for drinking water on Jeju Island, Korea. The domestic water supply of other area and humic acid solution (HA) were used as a reference point. The effects of chlorine contact time, solution temperature and pH on DBPs formation potential (DBPFP) were investigated for raw waters. In addition, the effect of $Br^-$ was studied for HA. The DBPFP (THMFP, HAAFP and HANFP) were increased with increasing chlorine contact time. Comparing the individual DBPFPs for raw waters, they decreased in the order of HAAFP > THMFP ${\geq}$ HANFP. As the solution temperature was increased, the THMFP, HAAFP and HANFP increased. With increasing the solution pH, the THMFP was increased, but HAAFP and HANFP were decreased. With the addition of 0.3 mg/L $Br^-$ for HA, the DBPFP was increased and the major chemical species changed: from trichloromethane to dibromochloromethane and tribromomethane for THMs; from dichloroacetic acid and trichloroacetic acid to tribromoacetic acid for HAAs; and from dichloroacetonitrile to dibromoacetonitrile for HANs.

• 대한전자공학회논문지SP
• /
• 제41권5호
• /
• pp.71-75
• /
• 2004

본 논문에서는 플라즈마 디스플레이 패널 생산 공정에서 카메라를 이용한 검사장비와 색차계를 이용한 검사장비 사이의 색차를 줄이기 위한 칼라 보정 방법을 제안한다. 칼라 보정 행렬은 두 장비에서 RGB 원색과 기준백색의 색도좌표로 획득한 RGB에서 XYZ 변환 행렬들 사이의 관계를 이용함으로써 구성할 수 있다. 제안한 칼라 보정 방법이 적용된 비접촉식 칼라 검사장비가 다양한 테스트 칼라에 대하여 영역 칼라 CCD 카메라에 의해 획득된 색도좌표를 색차계에 의해 측정된 색도좌표로 만족스럽게 보정됨을 실험결과에서 확인할 수 있다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.96-102
• /
• 1998

In this study, the theory and application of phase-shifting shadow moire topography is focused on the non-contact measurement of object surfaces for practical use in the field of production engineering. Shadow moire topography has been studied during last few decades in the area of the optical physics, and now its mathmatical theory has been established. Generally, in case of the classical shadow moire topography, the sensitivity is a few tenths of millimeter in best cases. Here we tried the application of phase-shifting method to the conventional shadow moire topography. But the reference grating and the deformed grating are mutually dependent because it is impossible to obtain uniform phase shifts on the whole Held. Therefore it is difficult to use a phase-shifting method in shadow moire topography. However, it was shown that constant phase-shifting was able to be measured by moving both the grating and light source. Finally we obtained a better result by using this procedure and applied the phase-shifting shadow moire to three dimensional object measurement.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.691-702
• /
• 2017

Clearances are essential for the assemblage of mechanisms to allow the relative motion between the joined bodies. This clearance exists due to machining tolerances, wear, material deformations, and imperfections, and it can worsen the mechanism performance when the precision and smoothly-working are intended. Energy is a subject which is less paid attention in the area of clearance. The effect of the clearance on the energy of a flexible slider-crank mechanism is investigated in this paper. A clearance exists in the joint between the slider and the coupler. The contact force model is based on the Lankarani and Nikravesh model and the friction force is calculated using the modified Coulomb's friction law. The hysteresis damping which has been included in the contact force model dissipates energy in clearance joints. The other source for the energy loss is the friction between the journal and the bearing. Initial configuration and crank angular velocity are changed to see their effects on the energy of the system. Energy diagrams are plotted for different coefficients of friction to see its influence. Finally, considering the coupler as a flexible body, the effect of flexibility on the energy of the system is investigated.