• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.881-886
• /
• 2013

Even though a multi-view camera system is able to capture multiple images at different viewpoints, the color distributions of captured multi-view images can be inconsistent. This problem decreases the quality of multi-view images and the performance of post-image processes. In this paper, we propose an improved polynomial model for effectively correcting the color inconsistency problem. This algorithm is fully automatic without any pre-process and considers occlusion regions of the multi-view image. We use the 5th order polynomial model to define a relative mapping curve between reference and source views. Sometimes the estimated curve is seriously distorted if the dynamic range of extracted correspondences is quite low. Therefore we additionally estimate the first order polynomial model for the bottom and top regions of the dynamic range. Afterwards, colors of the source view are modified via these models. The proposed algorithm shows the good subjective results and has better objective quality than the conventional color correction algorithms.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.417-425
• /
• 2014

Color characteristics of the Cu-Sn alloys (bronze) in as-cast conditions were determined by reference to the $L^*$, $a^*$, $b^*$ color space. Results show that the values of $a^*$ and $b^*$ decrease with the increase in Sn levels, indicating that the colors of bronze alloys are increasingly away from red and yellow with the increase in the fraction of the ${\delta}$ phase while the opposite is true with the ${\alpha}$ phase. It has also been found in similar experiments with the Cu-22% Sn alloys that heat treatments in varying conditions produce subtle differences in their color characteristics as observed in the $L^*$, $a^*$, $b^*$ color space, due likely to the formation of various phases in different fractions.

• Journal of Technologic Dentistry
• /
• v.34 no.4
• /
• pp.369-377
• /
• 2012

Purpose: The aim of study was to compare the dimensional stability of digitized dental stone replica using different color of gypsum materials using a white light scanner with three-dimensional software. Methods: A master model(500B-1, Nissin dental product, Japan) with the prepared lower full arch tooth was used. Several type IV stones(white, yellow, green) were used for 30 stone casts(10 casts each) duplicated a master model of mandible. The master model and the replicas were digitized with the non-contacting white light scanner to create 3-dimensional digital models. The linear distance between the reference points were measured and analyzed on the Delcam Copycad$^{(R)}$(Delcam plc, UK) 3D graphic software. One-way analysis of variance(ANOVA) combined with a Tukey multiple-range test were used to analysis the data(${\alpha}$=0.05). Results: There were considerable differences in mean values between gypsum materials within each color(white, yellow, green), and this difference was statistically significant, p=0.001. Conclusion: Digitization of dental materials on optical scanner was affected by color. Three different color of gypsum materials showed clinically acceptable accuracies of full arch digital model produced by them. Besides, these results will have to be confirmed in further clinical studies.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1111-1118
• /
• 2003

We present one-color nonlinear wavepacket interferometry (WPI) signal calculations for a system of two electronic levels and one vibrational degree of freedom. We consider two cases, a displaced harmonic oscillator system, which can be treated analytically, and a model photodissociative system, whose WPI signal must be calculated by numerical wavepacket propagation. We show how signals obtained with different combinations of intrapulse-pair phase shifts can be combined to isolate the complex-valued overlap between a given onepulse target wavepacket and a variable three-pulse reference wavepacket. We demonstrate that with a range of inter- and intrapulse-pair delays the complex overlaps and variable reference states can be used to reconstruct the target wavepacket. We compare our results with previous methods for vibronic state reconstruction based on linear WPI and discuss further generalizations of our method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.149-149
• /
• 2000

We experimented on AGV driving test with color CCD camera which is setup on it. This paper can be divided into two parts. One is image processing part to measure the condition of the guideline and AGV. The other is part that obtains the reference steering angle through using the image processing parts. First, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, AGV knows the driving conditions of AGV. After then using of those information, AGV calculates the reference steering angle changed by the speed of AGV. In the case of low speed, it focuses on the left/right error values of the guide line. As increasing of the speed of AGV, it focuses on the slop of guide line. Lastly, we are to model the above descriptions as the type of PID controller and regulate the coefficient value of it the speed of AGV.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.58-64
• /
• 2012

Instead of the surface pattern arranged repeatedly in two axial direction on a plane, we propose double patterns superposing two one-axial linear patterns as a reference target for surface encoding. A upper layer of the superposed pattern is the transparent glass with grooves cut in it at a fixed pitch. The position is sensed by detecting a shift of beam due to difference of a refractive index. And a lower layer is the aluminum with color-coated grooves. The amount of beam reflected on the layer varies according to its targeting position and is detected for encoding. For the above reference pattern, we can detect two-axial positions using only the single beam. Furthermore, the pattern size can be expanded with a size of the detector kept constant, meaning that the measured range can be expanded easily. In this paper, we review the existing optical encoding methods for grid pattern, and discuss the hardware implementation of the suggested surface encoding method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.7
• /
• pp.83-91
• /
• 1993

A ghost cancelling method using the multiplicationless adaptive multipath channel identification is proposed. The IIR filter and the LMS algorithm are used for ghost cancelling. The coefficients of IIR filter are obtained by multipath channel identification. The LMS algorithm which is simple relatively is used as the adaptive algorithm. An MPS is selected as the reference signal and it is used as the input of the adaptive algorithm for the multipath channel identification. If an MPS is not exist, the horizontal syne, and color burst signal can be used as the reference signal. Improving of accuracy of the ghost cancelling in the presence of the phase variation in the multipath channel, a complex processing are also performed.

• Parasites, Hosts and Diseases
• /
• v.45 no.1 s.141
• /
• pp.65-68
• /
• 2007

The application of Giemsa technique to stain compressed diaphragm samples obtained from rodents experimentally infected with Trichinella spiralis is described. Diaphragm samples from rats heavily infected with 20 muscle larvae per gram of body weight(20 ML/gbw) were cut into several pieces and stained with Giemsa; on the other hand, whole diaphragms from slightly infected mice(1 ML/gbw) were also stained with Giemsa. Besides, muscle samples were also stained with Giemsa. Observation at 10 $\times$ magnification revealed that both ML and nurse cells(NC) look as bluish structures clearly contrasting with the pinkish color of the non-infected muscle fibers. NC in the diaphragms of mice could be easily observed at naked eye as blue points contrasting with the pink surrounding areas formed by the non-infected muscle fibers. Among NC observed in the diaphragms of rats infected with 20 ML/gbw, 4.4% was multiple infection. These findings were confirmed in sectioned and hematoxylin-eosin stained specimens. This data could be usefulness for a rapid diagnosis of trichinellosis in post-mortem mammals without magnification procedures.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.06a
• /
• pp.76-79
• /
• 2002

Ghost cancelers need to accurately estimate the distortions suffered by transmitted signals on their way to receivers by capturing ghost canceling reference signals in the vertical blanking interval. As ghosts become much severer, sync separation tends to malfunction, making it impossible to acquire measurement data for channel estimation. This paper presents a robust method of acquiring ghost data using their correlation properties, and evaluates its performance through computer simulation. The reference signals are inserted in such a manner that the polarity alternates from one frame to another to remove color bursts and sync signals, and to increase the signal-to-noise ratio as well. As a result, however, they are prone to timing jitters. So a simple yet effective method is proposed that can correct for even fractional time delays. The timing errors are found to be less than about 4% of the sample spacing.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.3
• /
• pp.492-501
• /
• 2015

To improve the shortcomings of baked Yugwa 0.5, 1.0, 1.5 and 2.0% natural ind igestible materials,- (gellan gum, glucomannan and carrageenan) were each treated with glutinous rice-baked Yugwa was processed, and quality imprpvements were deducted. Baked Yugwa with natural additives,- (gellan gum, glucomannan and carrageenan) was compared,- to additional test results with sample 1.5%(w/w) additives,- The one showing the highest preference from the sensory test was the acid number reference group at $2.19{\pm}0.42$, while the sample groups,- with different additives, were lower than the reference group by $1.48{\pm}0.39$ to $1.67{\pm}0.68$. The peroxide number reference group showed the highest preference of $49.34{\pm}0.42$, whereas the sample groups, with different additives, showed lower preferences than the reference group by $36.72{\pm}$0.42 compared to the sample group of glucomannan 1.5% (w/w), $32.45{\pm}0.59$ compared to the sample group of gellan gum 1.5%(w/w), and $28.65{\pm}0.56$ compared to the sample group of carrageenan 1.5% (w/w). According to the preference test targeting employees of Korean cake, manufacturers, there was no significant difference in color and flavor among all groups, whereas the sample group of carrageenan 1.5% (w/w) showed the highest scores in items of taste, texture and overall-preference, and also sample groups of glucomannan 1.5% (w/w) and gellan gum 1.5% (w/w) scored higher than the reference group. Baked Yugwa with 1.5% (w/w) additives of carrageenan, glucomannan and gellan gum have higher marketability by decreasing deterioration caused by oxidation of existing deep fried Yugwa and by improving the solid texture of baked Yugwa.