• Composites Research
• /
• 제12권2호
• /
• pp.62-69
• /
• 1999

복합재료가 피로하중을 받으면 재료 내부에 손상이 누적되며, 이는 재료의 물성 변화로 나타난다. 본 연구에서는 손상을 나타내는 인자로 피로계수를 사용하였다. 피로계수와 참고계수로 정의되는 손상함수로부터 복합재료의 피로수명 예측을 이론적으로 연구하였다. 제안된 모델들은 인가 응력 수준, 피로주기 및 피로수명의 함수로 유도하였다. 예측 결과는 유리섬유/에폭시 복합재료와 유리섬유/폴리에스터 복합재료를 사용한 다중응력 피로 실험 데이터를 이용하여 검증하였다.

• Steel and Composite Structures
• /
• 제12권2호
• /
• pp.167-181
• /
• 2012

Ultra high performance cementitious composite material is applied to the design of multifunctional permanent form for bridge pier in this paper. The basic properties and calculating constitutive model of ultra high performance cementitious composite are introduced briefly. According to momental theory of thin-walled shell, the analytical solutions of structural behavior parameters including circumferential stress, longitudinal stress and shear stress are derived for UHPCC thin-walled circular tube. Based on relevant code of construction loads (MHURD of PPC 2008), the calculating parameter expression of construction loads for UHPCC thin-walled circular tube is presented. With geometrical dimensions of typical pier, the structural behavior parameters of UHPCC tube under construction loads are calculated. The effects of geometrical parameters of UHPCC tube on structural behavior are analyzed and the design advices for UHPCC tube are proposed. This paper shall provide a scientific reference for UHPCC permanent form design and UHPCC hybrid structure application.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.353-355
• /
• 2007

A simple technique for PFC circuit is presented using UC3854. This technique is about current peak controlling by a reference current generator. Decreased peak currents of the boost pre-regulator reduce circuit current stress and so rated currents of circuit elements are minimized. Simulation and experimental results will verify the viability of the new scheme.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.205-214
• /
• 2022

Research on reducing the thickness of polyethylene terephthalate (PET) bottles is necessary to reduce the amount of plastic used. However, as decreasing a PET bottle's thickness weakens it, a robust bottle design is required. Therefore, in this study, we numerically analyzed various bottom designs of a carbonated soft drink PET bottle with 245 and 500 ml capacities and complicated petaloid shapes. Deformation, equivalent stress, maximum principal stress, and its direction according to each design were analyzed to study the strength of the bottle. The results serve as a reference to design robust petaloid PET bottle bottoms with a reduced thickness for carbonated soft drinks.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.50-57
• /
• 2013

The high temperature thermal attacks in welding can affect the residual stress of a frame for automotive assembly accompanying frame deformation. Also the residual stress can induce the negative effect on durability performance of the automobile. In order to analyze the frame deformation, the simplified test frame which had the similar shape (form) of the real automotive frame was fabricated. The contactless optical 3D scanner was used for the shape difference measurement of the frame between before and after the welding. The FE-model of the test frame was composed and the deformation and residual stress simulation were performed. The simulated results were compared with the measured results for the reference of the frame design following as the variation of welding sequency. The deformation shape of the frame by simulation was in good agreement with that by the experimental measurement. In addition, the optimized welding sequency with reduced deformation after welding could be achieved through these analyses.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1659-1670
• /
• 2001

It has been reported that cracks at mechanical fastener holes usually nucleate as elliptical corner cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks after penetrating the opposite surface. The weight function method is an efficient technique to calculate the stress intensity factors fur elliptical cracks using uncracked stress field. In this study the weight function method for three dimensional mixed-mode problem applied to elliptical comer cracks Is modified for elliptical arc through cracks and the stress intensity factors at two surface points of elliptical arc through cracks at mechanical fastener holes are analyzed by the weight function method. This study consists of two parts and in part I , the weight function method for elliptical arc through cracks is developed and verified.

• 한국식품과학회지
• /
• 제27권2호
• /
• pp.193-198
• /
• 1995

여러 저장온도($5{\sim}25^{\circ}C$)에서 저장하는 동안의 두부의 물성 변화는 응력완화현상을 이용하여 시간-온도 중첩 이론을 통해 계산하고 분석하였으며 WLF(Williams-Landel-Ferry)식을 이용해서 품질변화를 예측할 수 있는 적용식을 제시하였다. 저장온도가 낮을수록 저장시 두부 조직의 초기응력 및 평형응력(equilibrium stress)이 강하게 나타났고, $15^{\circ}C$ 온도를 기준으로 이동인자를 이용하여 좌우 수평으로 이동시 하나의 중첩곡선(master curve)을 구하였다. 이동인자와 중첩곡선을 이용하여 WLF식에 적용해서 활성화 에너지를 계산하였고 임의 온도에서 저장 시간을 예측하였으며, 실제 두부 조직의 저장성을 논하였다.

• 대한간호학회지
• /
• 제38권6호
• /
• pp.779-788
• /
• 2008

Purpose: This study was designed to construct a structural model explaining depression in university students. Methods: Data were collected from 1,640 university students by questionnaire, and analyzed using AMOS 5.0 to test the hypothetical model. Results: Fitness statistics for the modified model were GFI=.93, AGFI=.89, NFI=.91, and RMSEA=.081. All the 12 paths in the modified model proved to be statistically significant. Depression of university students accounted for 52% of the covariance by the factors. The factor that had the most influence on depression was individual vulnerability, and followed by sequence order, stress, social support, coping, and self-efficacy. Depression was influenced directly by individual vulnerability, stress, social support, and coping, and indirectly by individual vulnerability, stress, social support, and self-efficacy. Conclusion: A screening and management system for the high risk group is needed to effectively prevent depression and reduce rate of depression in university students. Detailed support programs which specifically deal with prevailing stressors should be developed to effectively reduce the harmful effects of individual vulnerability and stress. It is anticipated that the model constructed in this study could be utilized as a reference in developing various strategies to prevent and intervene depression in university students.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.895-906
• /
• 2015

Background: Mitigation of primary water stress corrosion cracking (PWSCC) is a significant issue in the nuclear industry. Advanced nickel-based alloys with lower susceptibility have been adopted, although they do not seem to be entirely immune from PWSCC during normal operation. With regard to structural integrity assessments of the relevant components, an accurate evaluation of crack growth rate (CGR) is important. Methods: For the present study, the extended finite element method was adopted from among diverse meshless methods because of its advantages in arbitrary crack analysis. A user-subroutine based on the strain rate damage model was developed and incorporated into the crack growth evaluation. Results: The proposed method was verified by using the well-known Alloy 600 material with a reference CGR curve. The analyzed CGR curve of the alternative Alloy 690 material was then newly estimated by applying the proven method over a practical range of stress intensity factors. Conclusion: Reliable CGR curves were obtained without complex environmental facilities or a high degree of experimental effort. The proposed method may be used to assess the PWSCC resistance of nuclear components subjected to high residual stresses such as those resulting from dissimilar metal welding parts.

• Journal of Animal Science and Technology
• /
• 제63권4호
• /
• pp.892-903
• /
• 2021

The objective of this study is to investigate effect of air cleaner operated during pig breeding period on stress hormones of pigs and their pork quality. The stress hormones (cortisol, epinephrine and norepinephrine) in blood sample of pigs reared in the housing rooms with or without air cleaner have been measured according to a pig's rearing stage: 0 day (farrowing), 21st day (farrowing-weaning), 70th day (weaning-nursery), 140th day (nursery-growing), and 180th day (growing-fattening). The comparison of pork quality according to the application of an air cleaner was performed through the carcass analysis of the pigs shipped from swine house. The levels of cortisol, epinephrine, and norepinephrine in pigs reared in housing rooms with and without air cleaners were found to be within the range of normal reference values. Among pork quality evaluation items, the thickness of intermuscular fat and final carcass grade of pigs raised in housing room with air cleaner was generally superior to those of pigs raised in housing room without air cleaner (p < 0.05). Based on the results obtained from this study, it is concluded that air cleaner does not have a significant effect on reducing pig stress but contributes to improving pork quality in pig breeding.