• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1837-1839
• /
• 1998

This paper proposes the strain-insensitive temperature sensing in quasi-distributed sensor system using different thermal expension coefficient materials. This system has the high sensitivity and hasn't the necessity of reference signal. We can monitor the condition of the power cable with this system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.156-161
• /
• 1992

In this research a monitoring system for turning using NC information and the current of feed motor as a monitoring signal was developed. The overall system consists of modules such as learning process, NC data transmission, generation of forecast information, signal acquisition, monitoring and post process. In the learning process, the reference data and the cutting force equation necessary for monitoring are obtained from the accumulated monitoring results. In the generation of forecast information, the information of forecasted cutting forces is acquired from the cutting force equation and NC program and appended to each NC block as a monitor code. Reliability of monitoring is improved by using the monitor code in the real-time monitoring. Monitoring module is divided into two parts : the off-line monitoring where errors of NC program are checked and the on-line monitoring where the level of motor current is monitored during cutting operations. If the actual current level exceeds the limit value provided by the monitor code in the level monitoring, it is recognized as abnormal. In the event of abnormal status, the post processor sends the emergency stop signal to NC controller to stop the operation. Actual experiments have shown that the developed monitoring system works well.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.174-180
• /
• 2015

This study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses safety culture impact index (SCII) to monitor the status of safety culture of the NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of the NPPs. As a result of applying SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of the NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.23 no.2
• /
• pp.201-217
• /
• 1998

This paper attempts to show how DEA(data envelopment analysis), a nonparametric productivity analysis method, can be employed for insurance companies to improve their respective efficiencies and competitiveness. Specifically, we measured relative technical efficiencies and returns to scale of 11 Korean property-liability insurance companies using BCC model, and raised several issues including the cause of inefficiency, benchmarking toward reference set and resource allocation concerning the insurance companies. Also, in order to monitor the variability of the research results over periods, we employed longitudinal analysis to see the moving patterns of technical efficiencies, returns to scale and frequencies included in the reference set of the individual insurance companies under consideration. The methodology and the results in this paper may also serve as a useful guideline for individual insurance companies to set their respective business strategies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.319-322
• /
• 1997

In vector control technique, stator currents of an induction motor are transformed to equivalent d-q currents in reference frame consist of d and q axis, each of which is coincide with flux and torque direction respectively. In this paper, the new algorithm is suggested where the stator current through an induction motor torque is monitored by using a vector control method where an additional equipment is not need. The G-programming is used to apply the suggested algorithm in the experiment and this is applied to an actual system to monitor the torque value of an induction motor on real time. To solve the vibration trouble of estimated torque caused from an unbalanced real rotating speed of an induction motor and measured rotating speed by suggesting the reconstructed in a method based on measurement current signal. This produced system testifies an accuracy of an induction motor through the experiment by comparing the reference value of the control method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.481-484
• /
• 2004

A form of measured temperature distribution to estimate condition of a electrical apparatus is a absolute reference for condition of the apparatus, time rate of transition, and difference between reference and currently temperature. Because passive thermography which has not injection of external thermal stimulation shows difference of temperature being on surface of a structure and temperature difference between the structure and back ground, the result could apply only to estimation or monitor for condition of terminal relaxation and overload related with temperature rising. However, a thermal flow in active thermography is differently generated by structure and condition of surface and subsurface. This paper presents the nondestructive testing using the properties and includes the results by heat injection and cooling to the apparatus. The buried discontinuity of subsurface could be detected by these techniques.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2009

Lane Keeping Assistant Systems (LKAS) require the cooperative operation between drivers and active steering angle/torque controllers. An LKAS is proposed in this study such that the desired reference path generation (DRPG) system generates the desired path to minimize the trajectory overshoot. Based on the reference path from the DRPG system, an optimal controller is designed to minimize the cost function. A HIL (Hardware In the Loop) simulator is constructed to evaluate the proposed LKAS system. The single camera is mounted on the simulator and acquires the monitor images to detect lane markers. The performance of the proposed system is evaluated by HIL system using the Carsim and the Matlab Simulink.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.221-226
• /
• 2006

Around 2002, the United States Coast Guard (USCG) identified a need to re-capitalize their Reference Station (RS) and Integrity Monitor (IM) equipment used in the Nationwide Differential Global Position System (NDGPS). Commercially available off-the-shelf differential RS and IM equipment lacked the open architecture required to support long-term goals that include future system improvements such as use of new civil frequencies on L2 and L5 and realization of a higher rate NDGPS beacon data channel intended to support RTK. The first step in preparing for this future NDGPS was to port current RTCM SC-104 compatible RS and IM functionality onto an open architecture PC-based platform. Trimble's product Charisma is a PC-based RS and IM software designed to meet these USCG goals. In fact USCG engineers provided key designs and design insights throughout the development. We cannot overstate the contribution of the USCG engineers. Fundamental requirements for this effort were that it be sufficiently flexible in hardware and software design to support fluid growth and exploitation of new signals and technologies as they become available, yet remain backward compatible with legacy user receivers and existing site hardware and system architecture. These fundamental goals placed an implicit adaptability requirement on the design of the replacement RS and IM. Additionally, project engineers were to remain focused on sustaining the high level of differential GPS service that 1.5 million legacy users have come to depend on. This paper will present new hardware and software (i.e., Trimble's Charisma software) architecture for the next generation NDGPS RS and IM. This innovative approach to engineering on an open architecture PC-based platform allows the system to continue to fulfill legacy NDGPS system requirements and allows the USCG and others to pursue a scalable hardware re-capitalization strategy. We will use the USCG's recapitalization project to explain the essential role of the Charisma software.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.4
• /
• pp.35-42
• /
• 2010

This paper reviews the current studies about the current secure OS, security module and SELinux, and suggests Linux access control module that uses the user discriminating authentication, security authority inheritance of subjects and objects, reference monitor and MAC class process and real-time audit trailing using DB. First, during the user authentication process, it distinguishes the access permission IP and separates the superuser(root)'s authority from that of the security manager by making the users input the security level and the protection category. Second, when the subjects have access to the objects through security authority inheritance of subjects and objects, the suggested system carries out the access control by comparing the security information of the subjects with that of the objects. Third, this system implements a Reference Monitor audit on every current events happening in the kernel. As it decides the access permission after checking the current MAC security attributes, it can block any malicious intrusion in advance. Fourth, through the real-time audit trailing system, it detects all activities in the operating system, records them in the database and offers the security manager with the related security audit data in real-time.