• Quality Improvement in Health Care
• /
• v.9 no.2
• /
• pp.176-197
• /
• 2002

Backgound : This study is to suggest the standardized format of the clinical sheets and the standardized items of every clinical sheet. The standardization of the medical records will increase the faithfullnes of the contents in them and it will contribute to construct the good health information system. Method : From Jan. 1st. 2001 to March 31st 2001, we gathered as many paper clinical sheets as possible by every class of institutions to review the faithfulness of the clinical contents in them. Clinical sheets of 9 tertiary care hospitals, 6 general hospitals and 56 clinics were gathered. Two experienced medical record administrators reviewed them. The review focus was to check whether the items recommend by the hospital standardization review criteria and hospital service evaluation organization were appeared in the clinical sheets and whether the contents of every item were written. Results : Tertiary care hospitals; In case of administrative data, the contents were filled well if the items were fixed. The clinical data like C.C, history,physical examiniation were filled well, but if the items were not fixed, some items were omitted. The result is that more items are to be filled if they are fixed. General hospitals Administrative data were filled more than 50%. Final diagnosis was filled about 66.7%.But other clinical data were not filled well and not many clinical related items were appeared in the sheets.In the legal point of view, the reason for visiting hosptals or the right diagnosis, patient condition at discharge could not be confirmed well.In surgery cases, surgical procedures could not be confirmed well as many surgical related information(surgery time, fluids and blood, number of sponges, biopsy, etc) were omitted. Clinics More than 70% administrative data were filled and fixed as items. Among the clinical related data, laboratory result was the most credible data. But without the right diagnosis, drug orders were given and doctors' written signatures were not appeared over 96.4%. So the clinical sheets cannot be used as a legal document. Conculusion : There was a tendency that the contents were filled well if the items were fixed in the documents, We also suggest a clinical check list to review the completeness and faithfulness of the clinical sheets. If many hospitals use the suggested clincal check list and if they make the necessary items fixed in the clinical sheets, the quality of the medical record will increase dramatically.

• Informatization Policy
• /
• v.24 no.3
• /
• pp.3-26
• /
• 2017

The amount of unstructured data generated online is increasing exponentially and the analysis of text data is being done in various fields. In order to identify the research trends on the platform government, the title, year, academic society, and abstract information of the academic papers on the subject of platform government were collected from the database of the domestic papers, DBPIA(www.dbpia.co.kr). The results of the existing research on the platform government and related fields were analyzed based on each stage of the national informatization promotion. The technology, service, and governance topics were extracted from papers on platform government and the trends of core topics were analyzed by year. Entering the era of the intelligent information society, this study has significance for providing the basis for defining a new role of government - the platform government that sets the stage for the private sector to lead the innovation, and plays the role of an 'enabler' and 'facilitator' instead. The purpose of this study is to understand the platform government research through objective analysis of its trends. Looking for future directions, this study will contribute to future research by providing reference materials.

• Journal of the Korean Society for Library and Information Science
• /
• v.22
• /
• pp.109-141
• /
• 1992

University library must have a substantial collection development policy, by which the short and long term plannings are set up to meet the goals of university education and to support university function. Only when university library organizes collection building based on the well-planned policy, can it establish the systematic collection building, which can satisfy users, support continuity of work, use budget efficiently, and solve the space problem by with-drawing the materials. But most Korean university libraries, contrary to many foreign cases, don't have proper systematic collection development policy or guideline that controls overall library work from planning the collection of materials to evaluating and preserving them. Questionaire on whether university library has collection development policy or guideline was answered positively by only 6 cases out of 57 cases, which is just 10.5 percent. Even in cases that they have a guideline, the content of the copied guideline they sent was confined to acquisition, which is just a part of collection development. Collection development is a statement needed to set up long and short term plannings in consideration of the aims of the library and the needs of users and to shape and manage the library collection systematically. With the above conception and definition, we try to make a proper collection development policy and guideline for the Korean university libraries. Here we must define the object of the university. Object of university is to have good curriculum, good courses, research activities on the part of the faculty, enlargement of graduate school, and establishment of various institutes, etc. And in guideline, selector, method of selection, level of selection and arrangement of budget, etc. must be described concretely in its contents. Since collection development policy and guideline of Korean university libraries should concern their situation, we must confer with the result of the survey and analysis on the matter of collection determination. Here the contents include the priority of materials to be collected, method of collecting materials, arrangement of budget, and others. The purpose of this study is to develop a tenative collection development guideline in reference to the Jeonju University Library by means of analyzing the guiding principle, contents of the guideline, and present conditions of the Korean university libraries. The systematic collection development based on the Guideline for Collection Development of the Korean University Library, can offer a satisfactory service to the users of the university community, and also contribute to the development of the university itself as well as the university library.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.782-792
• /
• 1999

효과적인 ATM 망의 관리는 연결 지향 환경, 다양한 서비스 등급, 대규모 트래픽, 가상 망 구성 그리고 여러가지 트래픽 유형 등과 같은 다양한 ATM 특성을 다룰 수 있어야만 한다. 이를 위해 ATM 포럼에서는 ATM 장치, 사설망, 공중망 및 그들간의 상호작용을 지원하기 위한 ATM 망 관리 참조 모델을 정의하였으며, 그 중 하나가 서로 다른 판매자로부터의 ATM 장비들간의 상호동작성을 보장하기 위해 SNMP 기반 망 관리 프로토콜을 통해 상호 연결된 인터페이스를 관리할 수 있도록 정의된 통합 지역 관리 인터페이스(ILMI) 프로토콜이다. ILMI의 목적은 두 인접한 ATM 장치로 하여금 그들 간에 공통의 ATM 링크에 대한 동작 파라메타를 자동적으로 구성할 수 있도록 함으로서, 관리자에 의해 수동 구성이 아닌 ATM 장치 상호간의 플러그 앤 플러그 기능을 지원하는데 있다. 본 논문에서는 이러한 ILMI 기술을 바탕으로 공중망 ATM 교환기에 연결된 가입자의 물리 인터페이스, ATM 계층 인터페이스, VPC 및 VCC의 구성 및 상태 정보를 효율적으로 관리하며, 가입자 시스템의 ATM 주소를 자동으로 등록, 관리할 수 있도록 하는 가입자 인터페이스 관리 시스템(SIMS)을 설계하고, 구현하였다. Abstract An effective ATM management must address the various features of ATM such as connection-oriented environment, varying class of service, large scale traffic, virtual network configurations and, and multiple traffic types. For this, ATM network management reference model defined by ATM Forum describes the various types of network management needed to support ATM devices, private networks, public networks, and the interaction between them. One of these types is Integrated Local Management Interface (ILMI) defined to manage interconnected interface through SNMP-based network management protocol for ensuring the interoperability of ATM devices from different vendors. The purpose of ILMI is to enable two adjacent ATM devices to automatically configure the operation parameters of the common ATM link between them and then to provide a Plug and Plug function to any ATM devices with not a passive configuration by manager but a automatic configuration. This paper design and implement a Subscriber Interface Management System (SIMS) which provide automatic registration and management of ATM address of subscriber system and efficiently manages physical interface of subscriber who is connected to public ATM switch, ATM layer interface, configuration information and status information of VPC and VCC.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.2
• /
• pp.41-56
• /
• 2019

Cloud manufacturing is a new concept of manufacturing process that works like a single factory with connected multiple factories. The cloud manufacturing system is a kind of large-scale CPS that produces products through the collaboration of distributed manufacturing facilities based on technologies such as cloud computing, IoT, and virtualization. It utilizes diverse and distributed facilities based on centralized information systems, which allows flexible composition user-centric and service-oriented large-scale systems. However, the cloud manufacturing system is composed of a large number of highly heterogeneous subsystems. It has difficulties in interconnection, data exchange, information processing, and system verification for system construction. In this paper, we derive the user requirements of various aspects of the cloud manufacturing system, such as functional, human, trustworthiness, timing, data and composition, based on the CPS Framework, which is the analysis methodology for CPS. Next, by analyzing the user requirements we define the system requirements including scalability, composability, interactivity, dependability, timing, interoperability and intelligence. We map the defined CPS system requirements to the requirements of oneM2M, which is the platform standard for IoT, so that the support of the system requirements at the level of the IoT platform is verified through Mobius, which is the implementation of oneM2M standard. Analyzing the verification result, finally, we propose a large-scale cloud manufacturing platform based on oneM2M that can meet the cloud manufacturing requirements to support the overall features of the Cloud Manufacturing CPS with dependability.

• Journal of Distribution Research
• /
• v.15 no.1
• /
• pp.1-24
• /
• 2010

I. Introduction The industry of domestic discount store was reorganized with 2 bigs and 1 middle, and then Home Plus took over Home Ever in 2008. In present, Oct, 2008, E-Mart has 118 outlets, Home Plus 112 outlets, and Lotte Mart 60 stores. With total number of 403 outlets, they are getting closer to a saturation point. We know that the industry of discount store has been getting through the mature stage in retail life cycle. There are many efforts to maintain existing customers rather than to get new customers. These competitions in this industry lead firms to acknowledge 'store loyalty' to be the first strategic tool for their sustainable competitiveness. In other words, the strategic goal of discount store is to boost up the repurchase rate of customers throughout increasing store loyalty. If owners of retail shops can figure out main factors for store loyalty, they can easily make more efficient and effective retail strategies which bring about more sales and profits. In this practical sense, there are many papers which are focusing on the antecedents of store loyalty. Many researchers have been inspecting causal relationships between antecedents and store loyalty; store characteristics, store image, atmosphere in store, sales promotion in store, service quality, customer characteristics, crowding, switching cost, trust, satisfaction, commitment, etc., In recent times, many academic researchers and practitioners have been interested in 'dual path model for service loyalty'. There are two paths in store loyalty. First path has an emphasis on symbolic and emotional dimension of service brand, and second path focuses on quality of product and service. We will call the former an extrinsic path and call the latter an intrinsic path. This means that consumers' cognitive path for store loyalty is not single but dual. Existing studies for dual path model are as follows; First, in extrinsic path, some papers in domestic settings show that there is 'store personality-identification-loyalty' path. Second, service quality has an effect on loyalty, which is a behavioral variable, in the mediation of customer satisfaction. But, it's very difficult to find out an empirical paper applied to domestic discount store based on this mediating model. The domestic research for store loyalty concentrates on not only intrinsic path but also extrinsic path. Relatively, an attention for intrinsic path is scarce. And then, we acknowledge that there should be a need for integrating extrinsic and intrinsic path. Also, in terms of retail industry, this study is meaningful because retailers want to achieve their competitiveness by using store loyalty. And so, the purpose of this paper is to integrate and complement two existing paths into one specific model, dual path model. This model includes both intrinsic and extrinsic path for store loyalty. With this research, we would expect to understand the full process of forming customers' store loyalty which had not been clearly explained. In other words, we propose the dual path model for discount store loyalty which has been originated from store personality and service quality. This model is composed of extrinsic path, discount store personality$\rightarrow$store identification$\rightarrow$store loyalty, and intrinsic path, service quality of discount store$\rightarrow$customer satisfaction$\rightarrow$store loyalty. II. Research Model Dual path model integrates intrinsic path and extrinsic path into one specific model. Intrinsic path put an emphasis on quality characteristics and extrinsic path focuses on brand characteristics. Intrinsic path is based on information processing perspective, and extrinsic path emphasizes symbolic and emotional dimension of brand. This model is composed of extrinsic path, discount store personality$\rightarrow$store identification$\rightarrow$store loyalty, and intrinsic path, service quality of discount store$\rightarrow$customer satisfaction$\rightarrow$store loyalty. Hypotheses are as follows; Hypothesis 1: Service quality perceived by customers in discount store has an positive effect on customer satisfaction Hypothesis 2: Store personality perceived by customers in discount store has an positive effect on store identification Hypothesis 3: Customer satisfaction in discount store has an positive effect on store loyalty. Hypothesis 4: Store identification has an positive effect on store loyalty. III. Results and Implications We examined consumers who patronize discount stores for samples of this study. With the structural equation model(SEM) analysis, we empirically tested the validity and fitness of the dual path model for store loyalty in discount stores. As results, the fitness indices of this model were well fitted to data obtained. In an intrinsic path, service quality(SQ) is positively related to customer satisfaction(CS), customer satisfaction(CS) has very significantly positive effect on store loyalty(SL). Also, in an extrinsic path, the store personality(SP) is positively related to store identification(SI), it shows significant effect on store loyalty. Table 1 shows the results as follows; There are some theoretical and practical implications. First, Many studies on discount store loyalty have been executed from various perspectives. But there has been no integrative view on this issue. And so, this research was theoretically designed to integrate various and controversial arguments into one systematic model. We empirically tested dual path model forming store loyalty, and brought up a systematic and integrative framework for future studies. We want to expect creative and aggressive research activities. Second, a few established papers are focused on the relationship between antecedents and store loyalty; store characteristics, atmosphere, sales promotion in store, service quality, trust, commitment, etc., There has been some limits in understanding thoroughly the formation process of store loyalty with a singular path, intrinsic or extrinsic. Beyond these limits in single path, we could propose the new path for store loyalty. This is meaningful. Third, discount store firms make and execute marketing strategies for increasing store loyalty. This research provides real practitioners with reference framework needed for actual strategy formation. Because this paper shows integrated and systematic path for store loyalty. A special feature of this study is to represent 6 sub dimensions of service quality in intrinsic path and 4 sub dimensions of store personality in extrinsic path. Marketers can make more analytic marketing planning with concrete sub dimensions of service quality and store personality. When marketers of discount stores make strategic planning like MPR, Ads, campaign, sales promotion, they can use many items which are more competitive than competitors.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.331-344
• /
• 2022

This study analyzed the characteristics of the soil and hydrological environment of abandoned paddy wetlands examined the changes in land cover type in the ecological affect area, analyzed the environmental factors of abandoned paddy wetlands, and examined the changes in land cover type in the ecological impact area. The ecological environment characteristics of the reference abandoned paddy wetlands were investigated through literature research, environmental spatial information service, and preliminary exploration of the abandoned paddy wetlands, and the basic data for the restoration of abandoned paddy wetlands ware provided by examining the changes in land cover type in the ecological impact area for 40 years. Through this study, it will be possible to manage the rapidly increasing number of abandoned farmland to be converted into wetlands so that it can perform functions equivalent to or greater than that of natural wetlands. In particular, as we checked the clues that abandoned paddy wetlands could spread to surrounding ecological influences through land cover changes, the study sites are highly likely to be reference wetlands, and if the topography, soil, water circulation system, and carbon reduction performance are analyzed carefully, it will be possible to standardize the development process. In addition, through the change in land cover, clues were confirmed that the abandoned paddy wetlands could spread to the surrounding ecological affect areas. The land cover type in the ecological impact area, forests was mainly distributed, but generally decreased rapidly in the last 10-20 years, and forests were changing from coniferous forests to broad-leaved forests, mixed forests, or grassland. It has not yet been fully called to the wetland, and it is found that it has maintained the form of barren or grassland, and as can be seen in the case of natural wetlands after more than 30 years after abandoned, it is expected that the transition will gradually proceed to wetlands that are structurally and functionally similar to natural wetlands.

• Journal of Nutrition and Health
• /
• v.55 no.1
• /
• pp.21-35
• /
• 2022

The recommended meal composition allows the general people to organize meals using the number of intakes of foods from each of six food groups (grains, meat·fish·eggs·beans, vegetables, fruits, milk·dairy products and oils·sugars) to meet Dietary Reference Intakes for Koreans (KDRIs) without calculating complex nutritional values. Through an integrated analysis of data from the 6th to 7th Korean National Health and Nutrition Examination Surveys (2013-2018), representative foods for each food group were selected, and the amounts of representative foods per person were derived based on energy. Based on the EER by age and gender from the KDRIs, a total of 12 kinds of diets were suggested by differentiating meal compositions by age (aged 1-2, 3-5, 6-11, 12-18, 19-64, 65-74 and ≥ 75 years) and gender. The 2020 Food Balance Wheel included the 6th food group of oils and sugars to raise public awareness and avoid confusion in the practical utilization of the model by industries or individuals in reducing the consistent increasing intakes of oils and sugars. To promote the everyday use of the Food Balance Wheel and recommended meal compositions among the general public, the poster of the Food Balance Wheel was created in five languages (Korean, English, Japanese, Vietnamese and Chinese) along with card news. A survey was conducted to provide a basis for categorizing nutritional problems by life cycles and developing customized web-based messages to the public. Based on survey results two types of card news were produced for the general public and youth. Additionally, the educational program was developed through a series of processes, such as prioritization of educational topics, setting educational goals for each stage, creation of a detailed educational system chart and teaching-learning plans for the development of educational materials and media.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.