• Journal of Technologic Dentistry
• /
• v.12 no.1
• /
• pp.15-21
• /
• 1990

This research was to investigate and study on 92 Dental Technicians who had had some experience of working or being employed at dental craft-shops or craft-rooms in Seoul area and had transferred to other types of occupation, with regard to their reasons for changing their profession. For an approach to the study, some questionnaires and interview including 3 aspects of in quiriesmental, economic and social backgrounds-were administered, and major findings are as follows ; 1. The ages in which transferring to other kinds of job happened occurred mostly from 20 to 30(78.26%) an a group of subjects whose ages ranged from 20 to 30 years old. And, with regard to their experience of working or being employed at dental craft-shops or craftrooms, the transfer of their profession to the other kinds mosty happened in a group of subjects(94.56%) whose experience of working in the dental field is less than 4 years. 2. The reason of transfer with reference to the mental background was mostly mattered in a group that expressed "Excessive Work Duties"(34.78%), and most lowly mattered in a group of subjets who had "Certain Relations with Dentists"(8.70%). Thus, it appeared that the biggest reason of transfer by the mental background was, due to the excessive duty work, not to have Sufficient time to be usualized by dental technicians for their own purpose. 3. With reference to the economical background, a group that declared there was "No Wage Standards in Ratio to Their Labor" was the most in the separation rate as shown 45.56%. And, a group suspecting "No Guarantee for Their Living after Retirement" Showed a separation rate, 9.78%. In other words, the reason for transfer was that they did not receive due wage according to their amount of labor. 4. With reference to the social background, a group making a subject for no good working environments or conditions had a separation rate, 41.30%, which was the most among others, and a group with a subject of "The Rarity of Employment because of Excessive Supply of Dental Technicians" had the rate, 10.87%, which was the lowest. This meant that the major cause of transfer by the social background was a phenomenon for dental technicans to escape from unclean working places.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2014

PURPOSE. The accuracy of a gypsum model (GM), which was taken using a conventional silicone impression technique, was compared with that of a polyurethane model (PM), which was taken using an iTero$^{TM}$ digital impression system. MATERIALS AND METHODS. The maxillary first molar artificial tooth was selected as the reference tooth. The GMs were fabricated through a silicone impression of a reference tooth, and PMs were fabricated by a digital impression (n=9, in each group). The reference tooth and experimental models were scanned using a 3 shape convince$^{TM}$ scan system. Each GM and PM image was superimposed on the registered reference model (RM) and 2D images were obtained. The discrepancies of the points registered on the superimposed images were measured and defined as GM-RM group and PM-RM group. Statistical analysis was performed using a Student's T-test (${\alpha}=0.05$). RESULTS. A comparison of the absolute value of the discrepancy revealed a significant difference between the two groups only at the occlusal surface. The GM group showed a smaller mean discrepancy than the PM group. Significant differences in the GM-RM group and PM-RM group were observed in the margins (point a and f), mesial mid-axial wall (point b) and occlusal surfaces (point c and d). CONCLUSION. Under the conditions examined, the digitally fabricated polyurethane model showed a tendency for a reduced size in the margin than the reference tooth. The conventional gypsum model showed a smaller discrepancy on the occlusal surface than the polyurethane model.

• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.263-277
• /
• 2024

The primary aim of this study is to introduce an innovative configuration for stirrup hooks in reinforced concrete beams and analyze the impact of factors such as stirrup spacing, placement, and hook lengths on the structural performance of reinforced concrete beam elements. A total of 18 specimens were produced and subjected to reversed cyclic loading, with two specimens serving as reference specimens and the remaining 16 specimens utilizing a specifically developed stirrup hook configuration. The experiment used reinforced concrete beams scaled down to half their original size. These beams were built with a shear span-to-depth ratio of 3 (a/d=3). The experimental samples were divided into two distinct groups. The first group comprises nine test specimens that consider the contribution of concrete to shear strength, while the second group consists of nine test specimens that do not consider this contribution. The preparation of reference beam specimens for both groups involved the utilization of standard hooks. The stirrup hooks in the test specimens are configured with a 90-degree angle positioned at the midpoint of the bottom section of the beam. The criteria considered in this study included the distance between hooks, hook angle, stirrup spacing, hook orientation, and hook length. In the experimental group examining the contribution of concrete on shear strength, it was noted that the stirrup hooks of both the R1 reference specimen and specific test specimens displayed indications of opening. However, when the contribution of concrete on shear strength was not considered, it was observed that none of the stirrup hooks proposed in the R0 reference specimen and test specimens showed any indications of opening. Neglecting the contribution of concrete in the assessment of shear strength yielded more favorable outcomes regarding structural robustness. The study found that the strength values obtained using the suggested alternative stirrup hook were similar to those of the reference specimens. Furthermore, all the test specimens successfully achieved the desired strengths.

• Journal of the Korean Home Economics Association
• /
• v.40 no.12
• /
• pp.31-48
• /
• 2002

The objective of this study was to find variables related to propensity of compensatory consumption of university students in Korean and Japan. Questionnaires research method was conducted and 477 samples were selected. Korean undergraduates have higher propensity of compensatory consumption for negative feelings than Japan undergraduates. Japan undergraduates have higher propensity of compensatory consumption for positive feelings than Korean undergraduates. Korean undergraduates have a tendency to compensate positive and negative feelings by drinking. Japan undergraduates have a tendency to compensate positive feelings by eating out, and to compensate negative feelings by buying books. In compensatory consumption for positive feelings, Korean undergraduates is influenced by group identity, but Japan undergraduates is influenced by reference group. Propensity of compensatory consumption of Korean undergraduates is mostly influenced by consumption tendency, materialism, group identity, and self-concept. Propensity of compensatory consumption of Japan undergraduates is influenced by consumption tendency, materialism, reference group, and their family income. The strongest predictor of propensity of compensatory consumption of Korean and Japan undergraduates is consumption tendency, followed by materialism.

• The Korea Journal of Herbology
• /
• v.28 no.4
• /
• pp.1-6
• /
• 2013

Objectives : In other to determine the optimal extraction conditions, the various Bojungikgi-tang (BJIGT) decoctions prepared by different pressure levels and different extraction times were compared and evaluated in terms of the extract yield and the total soluble solid content. Methods : Decoctions were prepared by the pressure levels of 0 (non-pressurized) and 1 $kgf/cm^2$ (pressurized) for 60, 120 and 180 min. The extract yield and the total soluble solids content of decoctions were measured, and the amounts of the reference compounds in decoctions were investigated by the analysis using high performance liquid chromatography. Results : The extract yield and the total soluble solid content were higher in decoctions extracted by the pressurized method than those from decoction with non-pressurized method. The patterns of yield and contents showed a proportional increase to the extraction time. In analysis of the linear regression for four reference compounds such as liquiritin, nodakenin, hesperidin, and glycyrrhizin, the good linearity with the correlation coefficient more than 0.9999 was observed. The highest contents for four reference compounds were observed at 180 min of both the pressurized method and the non-pressurized method. Conclusions : This study suggests that the pressure in extraction method and the extraction time affect the compositional constituents in BJIGT decoctions. The extraction time of 180 min could be chosen in both pressurized and non-pressurized method as optimal extraction condition.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.2
• /
• pp.65-70
• /
• 2005

Those specifications of the CLIA analytical tolerance limits are consistent with the performance goals in Six Sigma Quality Management. Six sigma analysis determines performance quality from bias and precision statistics. It also shows if the method meets the criteria for the six sigma performance. Performance standards calculates allowable total error from several different criteria. Six sigma means six standard deviations from the target value or mean value and about 3.4 failures per million opportunities for failure. Sigma Quality Level is an indicator of process centering and process variation total error allowable. Tolerance specification is replaced by a Total Error specification, which is a common form of a quality specification for a laboratory test. The CLIA criteria for acceptable performance in proficiency testing events are given in the form of an allowable total error, TEa. Thus there is a published list of TEa specifications for regulated analytes. In terms of TEa, Six Sigma Quality Management sets a precision goal of TEa/6 and an accuracy goal of 1.5 (TEa/6). This concept is based on the proficiency testing specification of target value +/-3s, TEa from reference intervals, biological variation, and peer group median mean surveys. We have found rules to calculate as a fraction of a reference interval and peer group median mean surveys. We studied to develop total error allowable from peer group survey results and CLIA 88 rules in US on 19 items TP, ALB, T.B, ALP, AST, ALT, CL, LD, K, Na, CRE, BUN, T.C, GLU, GGT, CA, phosphorus, UA, TG tests in chematology were follows. Sigma level versus TEa from peer group median mean CV of each item by group mean were assessed by process performance, fitting within six sigma tolerance limits were TP ($6.1{\delta}$/9.3%), ALB ($6.9{\delta}$/11.3%), T.B ($3.4{\delta}$/25.6%), ALP ($6.8{\delta}$/31.5%), AST ($4.5{\delta}$/16.8%), ALT ($1.6{\delta}$/19.3%), CL ($4.6{\delta}$/8.4%), LD ($11.5{\delta}$/20.07%), K ($2.5{\delta}$/0.39mmol/L), Na ($3.6{\delta}$/6.87mmol/L), CRE ($9.9{\delta}$/21.8%), BUN ($4.3{\delta}$/13.3%), UA ($5.9{\delta}$/11.5%), T.C ($2.2{\delta}$/10.7%), GLU ($4.8{\delta}$/10.2%), GGT ($7.5{\delta}$/27.3%), CA ($5.5{\delta}$/0.87mmol/L), IP ($8.5{\delta}$/13.17%), TG ($9.6{\delta}$/17.7%). Peer group survey median CV in Korean External Assessment greater than CLIA criteria were CL (8.45%/5%), BUN (13.3%/9%), CRE (21.8%/15%), T.B (25.6%/20%), and Na (6.87mmol/L/4mmol/L). Peer group survey median CV less than it were as TP (9.3%/10%), AST (16.8%/20%), ALT (19.3%/20%), K (0.39mmol/L/0.5mmol/L), UA (11.5%/17%), Ca (0.87mg/dL1mg/L), TG (17.7%/25%). TEa in 17 items were same one in 14 items with 82.35%. We found out the truth on increasing sigma level due to increased total error allowable, and were sure that the goal of setting total error allowable would affect the evaluation of sigma metrics in the process, if sustaining the same process.

• Publications of The Korean Astronomical Society
• /
• v.1 no.1
• /
• pp.39-54
• /
• 1984

For F,G,K stars, their photometric data and metallicity, [Fe/H] are collected and their correlations between $\delta$(U-B) and [Fe/H] for each spectral group are examined, using a reference sequence which is defined by the stars in Woolley's catalogue and other reference sequences. Detailed examination shows that the reference sequence by Woolley's catalogue appears to be properly defined for the calculation of $\delta$(U-B) of population I stars in the solar neighborhood. It is suggested that accuracies of metallicities derived from $\delta$(U-B) can be improved if we derive the correlations between [Fe/H] and $\delta$(U-B) from the stars in each spectral group.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.259-262
• /
• 2012

In this paper, we propose a new fast algorithm for effective scene change detection. The proposed algorithm exploits Otsu threshold matching technique, which was proposed earlier. In this method, the current and the reference frames are divided into square blocks of particular size. After doing so, the pixel histogram of each block is generated. According to Otsu method, every histogram distribution is assumed to be bimodal, i.e. pixel distribution can be divided into two groups, based on within-group variance value. The pixel value that minimizes the within-group variance is said to be Otsu threshold. After Otsu threshold is found, the same procedure is performed at the reference frame. If the difference between Otsu threshold of a block in the current frame and co-located block in the reference frame is larger than predefined threshold, then a scene change between those two blocks is detected.

• International Journal of Human Ecology
• /
• v.9 no.2
• /
• pp.45-54
• /
• 2008

This study examines the influence of acculturation level and ethnic groups as a fashion reference group on Korean-American consumer attitude toward luxury fashion brands. Of interest is the role of Korean culture, which emphasizes luxury brand consumption due to the Confucion value of 'face', on Korean-American attitudes toward luxury brands. Data were collected from 108 young Korean-Americans living in the Pacific Northwest of the United States. Descriptive statistics, factor analysis, and multiple regressions were conducted for the analysis. In general, the respondents had relatively negative attitudes toward luxury fashion brands. Even though the acculturation level did not have a significant influence, attitudes toward luxury fashion brands were influenced by Korean reference groups. Age at immigration did not have a significant relationship with attitudes toward luxury brands. Korean-Americans who maintain ties with Korean culture are more likely to have a positive attitude towards luxury fashion, regardless of familarity with American culture.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.5
• /
• pp.372-382
• /
• 2002

As the most of dentofacial deformity patients indicated to orthognathic surgery have strong desire for esthetic improvement as well as functional improvement, ideal esthetic evaluation should be made at surgical prediction. Lateral cephalographs has been commonly used for surgical prediction, however, remarkable discrepancy between esthetic viewpoint by simple looking and analysis on lateral cephalographs often found on evaluation of sagittal position of the upper and lower jaws especially in cases of mandibular prognathism of Koreans. In these cases, we have been employed Esthetic NaP(ENaP)-line for corrective evaluation and ideal surgical prediction on lateral cephalographs, but the efficacy of ENaP-line has not been evaluated. This is a study on efficacy of ENaP-line for orthognathic surgery of Korean mandibular prognathism. 170 Korean patients who had been diagnosed as mandibular prognathism and planned for orthognathic surgery at Department of Oral and Maxillofacial Surgery, College of Dentistry, Yonsei University during last 10 years are studied. The obtained results are as followings; among 170 patients of mandibular prognathism, 132 patients(77.6%) had not discrepancy in evaluation of sagittal position of the maxilla between cephalometric and esthetic evaluation(they are classified as Group I), however, 38 patients(22.4%) had definite discrepancy(they are classified as Group II). ENaP-line was employed in all cephalometric analysis of Group II. The proportions of male and female were similar in both Groups. Sixteen vertical reference lines perpendicular to 16 horizontal reference lines were obtained as followings; Each of the representative degree of ${\angle}SN/AFH$, ${\angle}SN/CFH$ and ${\angle}AFH/CFH$ obtained at Group I was applied to SN plane, AFH plane and CFH plane of Group II each other, and so 16 horizontal reference lines could be obtained individually according to each of the applied degree to each plane. And then their reliability to coincide with ENaP-line of Group II was evaluated. A vertical reference line perpendicular to a horizontal line made by application of the representative degree of ${\angle}$AFH/CFH in Group I to AFH line in Group II had the most highest coincidence with ENaP-line of Group II, however, its agreement was 42% in male and 47% in female. From this results, the rest of them should be determined their corrective jaw position definitely depend on