• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.322-326
• /
• 2008

In this paper, we have studied the images which have been reconstructed by using combination of images acquired by the variation of operating frequency. When inner images have been reconstructed, they have been superposed by the surface state effect. In this case, the images of the phase object can be enhanced by the contrast of inner images. There is a kind of specimen, one is a reference block having 1/4T, 1/2T, 3/4T side drilled holes as main run piping material of the steam generator in nuclear power plants. It has been shown that the two results of defect shapes have better than before in this processing and phase contrast grow about twice. And we have constructed the acoustic microscope by using a quadrature detector that enables to acquire the amplitude and phase of the reflected signal simultaneously. Further more we have studied the reconstruction method of the amplitude and phase images, the enhancement method of the defect images' contrast.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.324-330
• /
• 1995

Stimulated Brillouin scattering theory is described in an optical fiber. Frequency change with an optical heterodyne method is analyzed between reference signal of a source and stimulated Brillouin scattering signal in an optical fiber. By coupling a source with a few axial modes and an optical fiber ring resonator, Brillouin scattering is studied with a spectrum analyzer. Using reference beating signal of a source, we have reduced the Brillouin beating frequency from 13 GHz range to below GHz. Experimentally, we can see the Brillouin beating frequency from 13 GHz range to below GHz with a dispersion shifted fiber (1.32 GHz), Ti-doped fiber (900 MHz) and single mode optical fiber (870 MHz). MHz).

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.9-23
• /
• 2013

In recent days, there are many researches of wireless LAN services as the communication environment of wireless LAN are so improved that a lot of services are available in wireless environments. The frequency of the wireless LAN is a general resource that can be used to everyone without any permission. Many technologies using this ISM (Industry Science Medical) frequency band are developed fast and widely. But, as many devices use the same frequency band at th same time, the service quality is degraded and the speed of the service rate id degraded by the result of the interference. For overcome this problem, we must provide the new technology of the mobile devices and a new cell design scheme for obtaining maximum throughput that considering the wireless environments effectively. In this paper, we explain the main technology at the IEEE 802.11n environments and proposes the optimal cell design and reference model for gaining maximum performance to many mobile devices at the same time by investigating real environment testing results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.239-245
• /
• 2013

In this paper, we propose a time-frequency domain reflectometry (TFDR) based measurement method for localizing concentric neutrals corrosion on live underground power cable. It consists of two inductive couplers which can transmit the reference signal into live underground power cable and measure the reflected signals from the impedance discontinuities of concentric neutrals corrosion. In order to compensate the dispersion of the measured reflected signal via inductive coupler, an equalizer based on Wiener filtering is designed. To improve the localizing performance of concentric neutrals corrosion in the vicinity of the measurement point, the reference signal is removed from the measured reflected signals. The localization performance of the proposed method is verified by the concentric neutrals corrosion localization experiment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.113-121
• /
• 2005

In this paper, a constant output power supply system for ozonizer is proposed to remove the noise of ozonizer and control the output of ozonizer using feedback control. The proposed system is based on the rouble control loop such as the outer voltage control loop and inner current control loop. In the proposed system overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an internal model controller. The internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.2
• /
• pp.116-127
• /
• 2003

In this paper, a new fully digital control method for UPS inverter, which is based on the double control loop such as the outer voltage control loop and inner current control loop, is proposed. In the proposed control system, overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an Internal model controller The Internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the simulation and experimental results respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.8 s.350
• /
• pp.6-12
• /
• 2006

Recently, according to the rapid development of mobile system, the development of relative mobile components has been required, and especially, with the miniaturization of mobile component, the complex with nearby components has been progressed. In this paper, multi-output VC-TCXO (Voltage Controlled-Temperature Compensated Crystal Oscillator) for WCDMA integrates the additional CMOS inverter, so it can be the normal clipped sinewave output and additional CMOS output, and also it can be satisfied the VC-TCXO's requirements for WCDMA system. And the important characteristics of reference oscillator, like phase noise and frequency short term stability, are satisfied with WCDMA(UMTS) system's requirement In this paper, however, 25MHz is used for reference frequency, similarly and practically, we think that it can be used from 10MHz to 40MHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.550-557
• /
• 2017

Ionospheric delay, which affect the accuracy of GNSS positioning, is generated by electrons in Ionosphere. Solar activity level, region and time could make change of this delay level. Dual frequency receiver could effectively eliminate the delay using difference of refractive index between L1 to L2 frequency. But, Single frequency receiver have to use limited correction such as ionospheric model in standalone GNSS or PRC(pseudorange correction) in Differential GNSS. Generally, these corrections is effective in normal condition. but, they might be useless, when TEC(total electron content) extremely increase in local area. In this paper, monitoring algorithm is proposed for local ionospheric anomaly using multiple reference stations. For verification, the algorithm was performed with specific measurement data in Ionospheric storm day (20. Nov. 2003). this algorithm would detect local ionospheric anomaly and improve reliability of ionospheric corrections for standalone receiver.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.35-42
• /
• 2010

In this study, crosstalk between dominant interconnect pairs in an A/D converter circuit is analyzed in frequency domain and effects of termination conditions on crosstalk are described, based on the practical circuit conditions. An A/D converter circuit is a mixed circuit where both clean and noisy signals coexist such that the circuit probably suffers from distortion by crosstalk. An analog input signal and the reference voltage signal, which dominate the overall conversion performance of the A/D converter circuit, are ready to be distorted by crosstalk and include specific termination conditions, such as non-matching and capacitive termination, respectively. Thus, this study presents the model of crosstalk considering impedance mismatch at both ends and analyzes effects of the practical termination conditions in the analog input and the reference voltage interconnects on crosstalk. A typical circuit configuration of the two interconnects is described and crosstalk including near-end and far-end termination impedances is modeled. Effects of the near-end impedance mismatch in the analog input interconnect and the far-end capacitive termination in the reference voltage interconnect are estimated in the frequency domain by using the model of crosstalk and experiments are performed to confirm the estimated results. Microstrip lines are used as interconnects, involving the increase of loss in high frequencies.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.1-11
• /
• 2007

In this paper, a new fully digital control method for UPS inverter, which is based on the double control loop such as the outer voltage control loop and inner current control loop, is proposed. In the proposed control system, overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an internal model controller. The internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the simulation and experimental results respectively.