• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.5
• /
• pp.413-418
• /
• 2002

This paper proposed a feed-forward adaptive position controller that is robust for variable Inertia. The control system consists of PI Position controller, feed-forward and model reference adaptive control. A parameter g(t) of the feed-forward adaptive position controller is adapted by using both the reference model speed and position error. So it improves the transient response and reduces the settling time. And normalization function Is used to make linear adaptation time. The validity of the feed-forward adaptive controller is confirmed by simulation results.

• Journal of Aquaculture
• /
• v.21 no.2
• /
• pp.89-95
• /
• 2008

Flounder were fed a reference diet and test diets containing various feed ingredients: mackerel fish meal, meat meal, soybean meal, wheat flour, wheat gluten, corn gluten meal and brewer's yeast. Apparent digestibility was determined using a reference diet with 0.5% chromic oxide indicator and test diets contained 70% reference diet and 30% of the feed ingredient being evaluated. Apparent digestibility coefficients for amino acid and energy in the reference and test diets were determined, and digestibility coefficients for the test ingredients were calculated based on differences in the digestibility of test diets relative to the reference diet. The fish averaging 300 g were held in 2000 L tanks at a density of 20 fish per tank. Feces were collected from three replicate groups of fish using a fecal collection column attached to fish rearing tank. Apparent total amino acids digestibilities(90-95%) of mackerel fish meal, soybean meal, wheat gluten, corn gluten meal and brewer's yeast were higher than those of meat meal and wheat flour(P<0.05). Apparent energy digestibilities(86-98%) of mackerel fish meal, meat meal, soybean meal, wheat gluten and corn gluten meal were significantly higher(P<0.05) than those of wheat flour and brewer's yeast. These results provide useful information about nutrient and energy utilization for flounder.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.367-375
• /
• 2022

Generally, a proportional-resonant controller is used to eliminate steady-state errors during the voltage-current control of a double-conversion uninterruptible power supply (UPS) in a stationary reference frame. Additionally, the feed-forward control compensating for the load current, which can be considered a disturbance of the voltage controller, can be used to improve the disturbance rejection performance. However, during the parallel operation of UPSs, circulating current can occur between UPS modules when performing both feed-forward control and droop control because feed-forward control reduces the circulating current impedance. This study proposes a feed-forward compensation technique that considers the impedance of circulating current. An additional feed-forward compensation technique is developed to enhance the disturbance rejection performance. The validity of the proposed feed-forward compensation technique is verified by the experiment results of the parallel operation of a 500 W double-conversion UPS module.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.8-13
• /
• 2001

In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results present that these systems can be useful for the FMS(flexible manufacturing system) and unmanned automation system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1446-1452
• /
• 2002

In the turning process, the feed is usually selected by a machining operator considering workpiece, cutting tool and depth of cut. Even if this selection can avoid power saturation or tool breakage, it is usually conservative compared to the capacity of the machine tools and can reduce the productivity significantly. This paper proposes a selection method of the feed and the reference cutting force based on MRR(material removal rate), maximum spindle power and specific energy. In order to estimate and control cutting force accurately in transient and steady state, this study utilizes a synthesized cutting force estimation method and a Fuzzy controller. The experimental results show that these systems can be useful for the unmanned turning process.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.303-308
• /
• 2004

In this Paper a transmitter system for IMr-2000 using feed-forward linearization method was Proposed to linearize power amplifier. The feed-forward structure needs a reference signal to compare and neutralize distortion : this is achieved through the second modulator which is operated at very low input level to obtain a signal with a negligible distortion. Therefore, this structure can reduce distortion of modulator as well as Power amplifier. This is the advantage over the existing system structure. The Proposed transmitter system is designed and simulated by Agilent ADS ver.2002. A two tone test for the system is done at 1.98GHz center frequency with frequency spacing of 2MHz. The reduction of Inter-Modulation Distortion(IMD) is around 49.95dB. This proposed system offers an excellent combination of linearity and simplicity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.97-100
• /
• 1992

Locally available milk mix, coconut meal, cassava root meal, cassava leaf meal, maize, meat meal, fish meal, rice bran, rice polishings, wallow, molasses and coral sand in Fiji were analysed for proximate components, gross energy and mineral contents. The results obtained indicated typical and variable amounts of nutrients in these materials. On the basis of their nutrient contents, the potential usefulness and weaknesses of the various feed materials are discussed with specific reference to the formulations of diets for livestock and poultry in Fiji based on these locally available feed materials.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.46-53
• /
• 2017

We work for big offshore project in the Korean shipyards as a EPC contract. There are a lot of risks even though the FEED Engineering was taken in the famous engineering company. In case of ICHTHYS CPF, it worked on the FEED activity for several years. Here is mention that design modification was carried how to modify material and specification according to shipyards human resource and yard practice for your reference. Furthermore, I expect that this paper is used for Korean engineer for their reference.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.431-436
• /
• 2000

Adaptive feed forward control algorithms based largely upon LMS approach have developed in recent two decades, and they have been widely applied to practical sound and vibration control problems in the case of the reference signal is available. Feedforward control can be applied only when reference signals can be measured or regenerated, while feedback controllers are used to reduce; sound and vibration when reference signals are not available. In recent years, hybrid control schemes in which adaptive feed forward controllers are combined with feedback ones have been studied based on simulations and experiments. The results have shown that the hybrid control may have better control performances in convergence speed and steady state error than the single control schemes. Hybrid control has the advantages of improving stability and performance as well as the disturbance rejection property. However, little effort has been made to the analysis or interpretation of hybrid control systems. In this study, we discussed the feedback controller effects on the stability of feed forward control algorithm in the presence of uncertain error path and a simple example showed that a stable feedback controller could make the feedforward controller unstable. A design criterion of feedback controllers is proposed in order to guarantee the stability of feedforward algorithms in the presence of error paths with uncertainties.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.53-61
• /
• 2006

In high speed flash type or pipelining type A/D Converter, the faster sampling frequency is, the more the effect of DC reference fluctuation is increased by clock feed-through and kick-back. When we measure A/D Converter, further, external noise increases reference voltage fluctuation. Thus reference fluctuation reduction circuit must be needed in high speed A/D converter. Conventional circuit simply uses capacitor but layout area is large and it's not efficient. In this paper, a reference fluctuation reduction circuit using transmission gate is proposed. In order to verify the proposed technique, we designed and manufactured 6bit 2GSPS CMOS A/D converter. The A/D converter is based on 0.18um 1-poly 5-metal N-well CMOS technology, and it consumes 145mW at 1.8V power supply. It occupies chip area of $977um\times1040um$. Experimental result shows that SNDR is 36.25 dB and INL/DNL ${\pm}0.5LSB$ when sampling frequency is 2GHz.