• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.69-73
• /
• 2004

This paper deals with the transient performance of zero signal reference grid(ZSRG) and insulated/isolated ground(IG) in case of lightning strike or surge currents in buildings. Using HIFREQ, which is a commercial code for electromagnetic field analysis, the difference of transient performances of ZSRG and IG type grounding structure have been presented based on the numerical calculations. It is expected that the quantitative and numerical calculation based analysis, which is adopted in this paper, will attribute to the selection of optimal grounding method in the intelligent buildings.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1887-1893
• /
• 2016

The VSA(Video Signal Analysis) method is the time-domain approach for estimating ultrasonic attenuation which utilizes the envelop signals from backscattered rf signals. The echogenicity of backscattered ultrasonic signals, however, from deeper depths are distorted when the broadband transmit pulse is used and it degrades the estimation accuracy of attenuation coefficients. We propose the modified VSA method using adaptive bandpass filters according to the centroid shift of echo signals as a pulse propagates. The technique of dual-reference diffraction compensation is also proposed to minimize the estimation errors because the difference of attenuation properties between the reference and sample aggravates the estimation accuracy when the differences are accumulated in deeper depth. The proposed techniques minimize the distortion of relative echogenicity and maximize the signal-to-noise ratio at the given depth. Simulation results for numerical tissue-mimicking phantoms show that the Rectangular-shaped filter with the appropriate center frequency exhibits the best estimation performance and the technique of the dual-reference diffraction compensation dramatically improves accuracy for the region after the beam focus.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1525-1533
• /
• 2003

In the precision hot plate for wafer processing, uniform temperature of the upper plate is one of key factors affecting the quality of wafers. The state-of-the-art precision hot plates require temperature Variations less than $\pm$0.4$^{\circ}C$ during heating to 15$0^{\circ}C$, Which is difficult to be obtained only by the improvement of manufacturing techniques alone. In this study, computer aided heat transfer analysis was carried out to obtain the temperature distribution of the currently used reference hot plate for 200mm wafer. The analysis on the reference model assuming constant heat generation rate and uniform heating area showed total variation of 0.926$^{\circ}C$ at 15$0^{\circ}C$. One of the new design approaches based on the change of heating location together with different heat generation rate resulted in total variation of 0.297$^{\circ}C$ which is a 68% improvement compared to that of the reference model.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.877-888
• /
• 2002

Price is a product attribute, which is determined by the function of the producing cost and profit. It is also identified as one of the most important components of the marketing mix. For consumers, price is an always-existing cue, definite evaluation criteria, and easily accessible information in the purchasing process. Considering the concept of the clothing-price in a comprehensive perspective encompassing economic, psychological and marketing perspectives, a theoretical model was developed. The model includes souses and dimensions of price perception and related behaviors. Souses of price perception were: the actual retail price at selling point, the internal reference price and external reference price. The dimensions of price perception included sacrifice perception, economic value perception, inference, savings perception and price as information perception. Clothing price related behaviors that flowed these dimensions were: low price consciousness, value for money consciousness, price-quality inference, price-prestige inference, sale proneness and price mavenism. An empirical study was conducted to validate the theoretical model. A questionnaire was developed and data were collected from 680 adult women living in Seoul, Korea. Confirmatory factor analysis as well as exploratory factor analysis results showed that theorized price related behaviors were successful classifications.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.2
• /
• pp.67-75
• /
• 2012

Different from other natural hazards including floods, drought advances slowly and spreads widely, so that the preparedness is quite important and effective to mitigate the impacts from drought. Evaluation and forecast the status of drought for the present and future utilizing the meteorological scenario for agricultural drought can be useful to set a plan for agricultural drought mitigation in agriculture water resource management. In this study, drought climate scenario model on the basis of historical drought records for preparing agricultural drought mitigation was developed. To consider dependency and correlation between various climate variables, this model was utilized the historical climate pattern using reference year setting of four drought levels. The reference year for drought level was determined based on the frequency analysis result of monthly effective rainfall. On the basis of this model, drought climate scenarios at Suwon and Icheon station were set up and these scenarios were applied on the water balance simulation of reservoir water storage for Madun reservoir as well as the soil moisture model for Gosam reservoir watershed. The results showed that drought climate scenarios in this study could be more useful for long-term forecast of longer than 2~3 months period rather than short-term forecast of below one month.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.741-747
• /
• 2001

Three-dimensional, elastic-plastic finite element analyses for circumferential through-wall cracked pipes are performed using actual tensile data of stainless steels, for two purposes. The first one is to validate the recently-proposed enhanced reference stress (ERS) method to estimate the J-integral and COD for circumferential through-wall cracked pipes. The second one is to compare those results with the GE/EPRI estimations. It is found that the J-integral and COD estimations according to the GE/EPRI method can be very sensitive to how the stress-strain data are fitted using the Ramberg-Osgood relation. Moreover, no tendency can be found regarding the most appropriate fitting range for the Ramberg-Osgood fit. On the contrary, the J-integral and COD estimations based on the ERS method give more accurate results than the GE/EPRI estimation. The present results provide confidence in applying the proposed method to the Leak-Before-Break(LBB) analysis.

• Journal of The Korean Astronomical Society
• /
• v.22 no.1
• /
• pp.63-79
• /
• 1989

Current estimates, based on the same star-count analysis, of the distance to the globule Bamard 361 range from 300 pc to 650 pc. All the problems associated with the estimates have been fully rectified in this study, and a modification has been made to the classical Wolf diagram to improve the accuracy in the distance determination. A reference field was carefully selected close to the globule but well outside the globule boundary, and star counts for this field were performed on the blue POSS plate in order to set up the reference magnitude sequence appropriate to the general area of B 361. From the reference sequence, the stellar density function has been derived specifically for the direction toward the globule. Correction was made for the general interstellar extinction, and the luminosity function with the Wielen's dip was adopted. The resulting density function clearly reveals the existence of the local Cygnus-Orion arm in the direction of B 361 at about 700 pc away from the Sun. Analysis of the star-count data for the program field locates the globule at distance $600{\pm}50$ pc ; thus, the globule is an object located in the Cygnus-Orion arm, residing somewhat toward its leading edge.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.80-86
• /
• 2006

Bioequivalence is a term in pharmacokinetics used to access the expected in vivo biological equivalence of two proprietary preparations of a drug. Bioequivalence studies are usually performed for generic drugs. Two pharmaceutical products are bioequivalent if they are pharmaceutically equivalent and their bioavailabilioes after administration in the same molar dose are similar. Bioequivalence is usually accessed by single dose in vivo studies in healthy volunteers and the reference product is usually the innovator product that is marketed. Regulatory definition of bioequivalence is based on the statistical analysis of thebioavailability of the reference and test product. In general, two products are evaluated as bioequivalent if the 90% confidence interval of the relative mean Cmaxand AUC of the test to reference product are within 80.00% to 125.00% in the fasting state. Key process in bioequivalence study is development and validation of bioanalytical method, determination of the drug concentration in the biosamples (usually plasma or serum) obtained from volunteers, calculation of the pharmacokinetic parameters and statistical analysis of the pharmacokinetic parameters. Although current guidelines and regulations do not require the bioequivalence studies to be done under good laboratory practice (CLP), the issues to perform the bioequivalence studies under GLP environment is emerged both from the regulatory and industry side. GLP perspectives of bioequivalence studiesare needed to be discussed in respect to achieve quality assurance in bioequivalence studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2791-2798
• /
• 2015

The purpose of this study is to suggest Process Reference Model(PRM) for BIM/GIS-based Energy Information Modeling(BG-EIM) efficiently. Through the study, the detail process and consideration were derived to design EIM for the purpose of energy analysis depending on specific use-cases. To do this, we survey related studies and analyze the detailed EIM process. By using the results, BIM/GIS-based energy analysis consideration is defined and BG-EIM PRM is proposed.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.183-192
• /
• 2020

Purpose: This study was performed to assess the accuracy of preoperative cone-beam computed tomography (CBCT), when justified for other reasons, in locating the apical foramen and establishing the working length. Materials and Methods: Six electronic databases were searched for studies on this subject. All studies, of any type, were included if they compared measurements of working length with preoperative CBCT to measurements using an electronic apex locator (EAL) or histological reference standard. Due to the high levels of heterogeneity, an inverse-variance random-effects model was chosen, and weighted mean differences were obtained with 95% confidence intervals and P values. Results: Nine studies were included. Compared to a histological reference standard, CBCT indicated that the apical foramen was on average 0.40 mm coronal of its histological position, with a mean absolute difference of 0.48 mm. Comparisons were also performed to an EAL reference standard, but the conclusions could not be considered robust due to high levels of heterogeneity in the results. Conclusion: A low level of evidence is produced suggesting that preoperative CBCT shows the apical foramen to be on average 0.40 mm coronal to its histological position, with a mean absolute difference of 0.48 mm.