• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.59-64
• /
• 2023

Fire and disaster broadcasting systems are divided into analog, digital, and network-based digital public address systems, and important specifications in network-based digital public address systems are low-latency audio, high sampling rate, and multi-channel input and output. In the past, it has been widely used to the AoE method for distinguishing based on the MAC address of the data link layer. However, this method has a problem of increasing complexity and cost. This proposal is an AoIP/UDP method, which allows communication to be easily distinguished by IP address without the need for a separate redundant network, so that the network can be freely used and configured, and cost can be reduced by reducing complexity. After implementing the AoIP/UDP method, the experimental results showed that the cost was improved with the equivalent performance with 2.66ms latency.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.611-620
• /
• 2006

The composite two plate-girder bridges are generally defined as a non-redundant load path structure because the bridge can collapse if one of the two girders is seriously damaged by a fatigue crack. In this paper, a numerical study on the evaluation of the after-fracture redundancy of the composite two-girder bridges was accomplished. The evaluation has been performed on the simple and three-span continuous bridges with I-section cross beams which serve as transverse bracing, and with or without the bottom lateral bracing system. The load carrying capacities of the intact and damaged bridges with or without lateral bracing were evaluated from material and geometric nonlinear analysis, respectively and the redundancy was evaluated for each case. It was acknowledged from the analytical results that both simple and continuous intact two-girder bridges have sufficient redundancy even without lateral bracing, but it takes an important role to improve the redundancy of damaged bridges.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.2
• /
• pp.311-326
• /
• 2024

The rapid development of neural network technology promotes the neural network model driven by big data to overcome the texture effect of complex objects. Due to the limitations in complex scenes, it is necessary to establish custom template matching and apply it to the research of many fields of computational vision technology. The dependence on high-quality small label sample database data is not very strong, and the machine learning system of deep feature connection to complete the task of texture effect inference and speculation is relatively poor. The style transfer algorithm based on neural network collects and preserves the data of patterns, extracts and modernizes their features. Through the algorithm model, it is easier to present the texture color of patterns and display them digitally. In this paper, according to the texture effect reasoning of custom template matching, the 3D visualization of the target is transformed into a 3D model. The high similarity between the scene to be inferred and the user-defined template is calculated by the user-defined template of the multi-dimensional external feature label. The convolutional neural network is adopted to optimize the external area of the object to improve the sampling quality and computational performance of the sample pyramid structure. The results indicate that the proposed algorithm can accurately capture the significant target, achieve more ablation noise, and improve the visualization results. The proposed deep convolutional neural network optimization algorithm has good rapidity, data accuracy and robustness. The proposed algorithm can adapt to the calculation of more task scenes, display the redundant vision-related information of image conversion, enhance the powerful computing power, and further improve the computational efficiency and accuracy of convolutional networks, which has a high research significance for the study of image information conversion.

• Journal of the International Relations & Interdisciplinary Education
• /
• v.4 no.2
• /
• pp.63-76
• /
• 2024

Digital technology is progressively transforming rural education and offering unprecedented opportunities for advancement. This study aims to analyze the impact of digital technology on rural education, focusing on the usage of digital resources in Wencheng County, Zhejiang Province, as a case study. The primary objective of this research is to explore how the application of digital technology contributes to balanced educational development in rural areas and to identify the key challenges and issues that accompany such technological advancements. The study revealed several significant issues in Wencheng County's rural education system, including inefficient use of digital resources, inadequate digital skills among educators, and insufficient exploration of digital innovation. In particular, the redundant purchasing of digital educational resources and the inefficient utilization of these resources, coupled with the low adaptability of teachers to digital technologies, emerged as major concerns. The study proposes strategies to address these issues. Ultimately, it presents an optimized pathway for successfully implementing digitalization in rural education and offers policy insights that could be applied in other regions to achieve similar improvements.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.11
• /
• pp.1015-1026
• /
• 2019

The purpose of this study is to develop evaluation indexes for improving the quality of long-term care institutions (facility salary) evaluation in the sense that the applicability and effectiveness of previous studies related to the development of evaluation indexes for long-term care facilities for elderly are insufficient. There was this. To this end, an analytical review of the 2018 long-term care institution (accommodation benefit) evaluation index, an analysis of Japan's elderly long-term care home evaluation index, and the elderly long-term care facility workers in Korea and the special care home for the elderly in Japan FGI on evaluation indicators and evaluation system was conducted. Based on the results of the research, evaluation indicators were developed in terms of supporting users to receive high quality services. The characteristics of the elderly, that is, the characteristics of elderly diseases that are difficult to maintain and improve, the direction and transparency of institutional operation, and the need for terminal care were reflected. Forty-three evaluation indicators were presented, covering institutional operations, environment and safety, beneficiary rights protection, payroll process, and payroll results. In addition, we proposed a four-step multi-level evaluation system that can improve the efficiency of the evaluation process by improving the redundant and unnecessary evaluation process.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.26-32
• /
• 2021

In ocean field, the spread of the Fourth Industrial Revolution based on information and communication technology requires high precision and stable PNT&D (Position, Navigation, Timing and Data). As the IMO (International Maritime Organization) and IALA (The International Association of Marine Aids to Navigation and Lighthouse Authorities) are requiring backup systems due to mitigate vulnerabilities and the increase of dependency on GNSS (Global Navigation Satellite System), Korea is conducting a research & development of R-Mode. An DGPS (Differentiate Global Positioning System) reference station that uses MF, an existing maritime infrastructure, and AIS (Automatic Identification System) base stations that use 34 integrity station and VHF will be utilized in this study to avoid redundant investment. Because there are radio shadow areas that display low signal levels in the west sea, the establishment of new R-Mode reference and integrity station will be intended to resolve problems regrading the radio shadow area. Because the frequency has a characteristic in that radio wave transmits well along the ground (water surface) in low frequency band, simulation and measurement were conducted therefore this paper to propose candidate sites for R-Mode reference and integrity station resulted through p wave's propagation characteristics analysis. Using this paper, R-Mode reference and integrity station can be established at appropriate locations to resolve radio shadow areas in other regions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1623-1636
• /
• 2009

A currently domestic governmental R&D business is early to 100. And this is each managed individually in 15 professional organizations of research and management by characteristics of a business. For this Reason, A redundant investment issue regarding national R&D occurs, and an issue regarding efficiency of R&D investment by insufficiency of systematic R&D research project and result management is continuously raised. Ministry of Education Science and Technology establishing National Science & Technology Information Service(NTIS) in order to solve these issues. NTIS is the national R&D Portal System which can support efficiency of research and development to result utilization in planning of national research and development. As data of the same meaning are named particularly in each organizations, and that made to different data types, It is an issue to be difficult to achieve high level qualify, accuracy of integrated data in case of integration of distributed data like NTIS In this paper We consider integrated DB constructions and Information Linking of R&D Participants/Projects/Results information in a NTIS system for data qualify Improvement, and then We analyze the cause of the data quality problem, and we propose the improvement plan for data quality elevation of NTIS system.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.591-602
• /
• 2003

Delay and discontinuance phenomenon of service are cause by sudden increase of the network communication amount and the quantity consumed of resources when Internet users are driven excessively to a conventional single large database sewer. To solve these problems, spatial database cluster consisted of several single nodes on high-speed network to offer high-performance is risen. But, research about spatial join operation that can reduce the performance of whole system in case process at single node is not achieved. So, in this paper, we propose efficient parallel spatial join processing method in a spatial database cluster system that uses data partitions and replications method that considers the characteristics of space data. Since proposed method does not need the creation step and the assignment step of tasks, and does not occur additional message transmission between cluster nodes that appear in existent parallel spatial join method, it shows performance improvement of 23% than the conventional parallel R-tree spatial join for a shared-nothing architecture about expensive spatial join queries. Also, It can minimize the response time to user because it removes redundant refinement operation at each cluster node.

• Science of Emotion and Sensibility
• /
• v.12 no.4
• /
• pp.433-442
• /
• 2009

People are tending to buy products through the Internet rather than purchasing them from the store. Some of the consumers give their feedback on line such as reviews, replies, comments, and blogs after they purchased the products. People are also likely to get some information through the Internet. Therefore, companies and public institutes have been facing this situation where they need to collect and analyze reviews or public opinions for them because many consumers are interested in other's opinions when they are about to make a purchase. However, most of the people's reviews on web site are too numerous, short and redundant. Under these circumstances, the emotion scanning system of text documents on the web is rising to the surface. Extracting writer's opinions or subjective ideas from text exists labeled words like GI(General Inquirer) and LKB(Lexical Knowledge base of near synonym difference) in English, however Korean language is not provided yet. In this paper, we labeled positive, negative, and neutral attribute at 4 POS(part of speech) which are noun, adjective, verb, and adverb in Korean dictionary. We extract construction patterns of emotional words and relationships among words in sentences from a large training set, and learned them. Based on this knowledge, comments and reviews regarding products are classified into two classes polarities with positive and negative using SO-PMI, which found the optimal condition from a combination of 4 POS. Lastly, in the design of the system, a flexible user interface is designed to add or edit the emotional words, the construction patterns related to emotions, and relationships among the words.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.147-153
• /
• 2020

Developments in aircraft require safety verification through flight testing for many hours with prototype design and production. The test evaluation step of performing flight tests was an important process that determines the success in the development of the system. In particular, safety development through flight tests in the armed flight test is important for the development of attack helicopters. In the development of attack helicopters, the evaluation period and cost related to the armed flight test are closely related to the required ammunition requirement. Therefore, this paper presents the amount of ammunition required for the military flight test between attack helicopter developments through an analysis of the AH-1 helicopter in a similar case and ADS-44-HDBK of military specification. The AH-1 can be used to calculate the ammunition demand by considering the exclusion of redundant firing tests and configuration differences. In the case of the machine gun-equipped configuration, approximately 10,500R was required, and approximately 324R was required in the case of a rocket-mounted configuration. In addition, if the armed integrated bench is used properly, it is expected to promote efficiently the flight test in the armed flight by identifying the possible risk factors with armed flight tests and excluding them.