• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1003-1005
• /
• 1997

To evaluate the quality of a system or its ability to perform a required function, it is necessary to quantify the reliability of that system. The reliability techniques are based on the concept of expected failure rate and average-outage-duration method. For each load point, the expected failure rate, average outage duration and average annual outage time are evaluated. This paper deals with the reliability evaluation for distribution system including the protection relay system. In evaluating the reliability, it suggests a method for the analysis of protective system reliability, that provides a probabilistic measure of the success of the protective apparatus to perform its intended function. The analysis shows the dependency of success on the reliability of many components, and the way this reliability may be enhanced by redundancy.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.557-564
• /
• 2002

One of the primary factors like plate structure In ship is redundancy structure that is comparable with ocean structure and frame structure. The more component material becomes buckling collapsed locally the less structure stiffness becomes accordingly. As a result, by increasing the load distribution of any other subsidiary structure continually component member collapses, therefore the structure could be in danger of collapse. So, in order to interpret this phenomenon precisely, the study on boundary condition of the ship's Plate and post-buckling analysis must be considered. In this study, the rectangular plate is compressed by the in-plane load. Buckling ＆ Ultimate strength characteristics we applied to be the elasto-plasticity large deformation by F.E.M. On this basis, elasto-plasticity of the plain plate are investigated. This study proved elasto-plasticity behaviour of tile ship's plate In accordance with boundary condition based on the series analysis In case of the compressive load operation.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2557-2560
• /
• 2000

The protection system of the nuclear reactor and chemical reactor are representative of PPC(Plant Protection Controller). This PPC must be designed based on reliability as well as concept of safety, which is a failed system go a way of safe. PPC is consist of part of data acquisition, calculator, communication with redundancy, and a voter is important factor of reliability. Because it is serial connected. This paper presents a Design and Analysis of a Voting Mechanism considering Safety for NMR PPC Using EPLD. In the case of digital implementation a coincidence logic(voter) of PPC, it needs CPU and memory, so increase a number of units. Therefore the failure rate and cost is increased. On the contrary when it is designed EPLD or FPGA.

• Structural Engineering and Mechanics
• /
• v.45 no.2
• /
• pp.201-209
• /
• 2013

A new dynamic reliability analysis of structure under repeated random loads is proposed in this paper. The proposed method is developed based on the idea that the probability density of several times random loads can be derived from the probability density of single-time random load. The reliability prediction models of structure based on time responses under several times random loads with and without strength degradation are obtained by using the stress-strength interference theory and probability density evolution method. The resulting differential equations in the prediction models can be solved by using the forward finite difference method. Then, the probability density functions of strength redundancy of the structures can be obtained. Finally, the structural dynamic reliability can be calculated using integral method. The efficiency of the proposed method is demonstrated numerically through a speed reducer. The results have shown that the proposed method is practicable, feasible and gives reasonably accurate prediction.

• Proceedings of the KSPS conference
• /
• 2003.05a
• /
• pp.123-126
• /
• 2003

We discuss how to reduce the number of inverse matrix and its dimensions requested in MLLR framework for speaker adaptation. To find a smaller set of variables with less redundancy, we employ PCA(principal component analysis) and ICA(independent component analysis) that would give as good a representation as possible. The amount of additional computation when PCA or ICA is applied is as small as it can be disregarded. The dimension of HMM parameters is reduced to about 1/3 ~ 2/7 dimensions of SI(speaker independent) model parameter with which speech recognition system represents word recognition rate as much as ordinary MLLR framework. If dimension of SI model parameter is n, the amount of computation of inverse matrix in MLLR is proportioned to O($n^4$). So, compared with ordinary MLLR, the amount of total computation requested in speaker adaptation is reduced to about 1/80~1/150.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.40.2-40
• /
• 2001

The protection system of the system communication, nuclear reactor and chemical reactor are representative of reliable system. This reliable system must be designed based on reliability as well as concept of safety, which is a failed system go a way of safe. Reliable system is composed of part of data acquisition, calculator, communication with redundancy, and a voter is important factor of reliability. Because it is serially connected. This paper presents a Design and Analysis of a Voting Mechanism considering Safety for reliable system Using EPLD. In the case of digital implementation a coincidence logic (voter) of reliable system, it needs CPU and memory, so increase a number of units. Therefore the failure rate and cost are increased on contrary when it is designed EPLD or FPGA.

• Structural Engineering and Mechanics
• /
• v.52 no.6
• /
• pp.1193-1208
• /
• 2014

A simulation of failures on responsible elements is only one form of the extreme structural behavior analysis. By understanding the dynamic behavior in incidental situations, it is possible to make a special structural design from the point of the largest axial force, stress and redundancy. The numerical realization of one such simulation analysis was performed using FEM in this paper. The boundary parameters of transient analysis, such as overall structural damping coefficient, load accelerations, time of load fall and internal forces in the responsible structural elements, were determined on the basis of the dynamic experimental parameters. The structure eigenfrequencies were determined in modal analysis. In the study, the basic incidental models were set. The models were identified by many years of monitoring incidental situations and the most frequent human errors in work with heavy structures. The combined load models of structure are defined in the paper since the incidents simply arise as consequences of cumulative errors and failures. A feature of a combined model is that the single incident causes the next incident (consecutive timing) as well as that other simple dynamic actions are simultaneous. The structure was observed in three typical load positions taken from the crane passport (range-load). The obtained dynamic responses indicate the degree of structural sensitivity depending on the character of incident. The dynamic coefficient KD was adopted as a parameter for the evaluation of structural sensitivity.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.383-389
• /
• 2013

Analysis and review of survivability is one of the most important aspects when naval vessels are designed. Because aiming points of threat towards the naval vessels in the battle field could not be estimated exactly, probabilistic and statistic approach is frequently introduced to evaluate and enhance the vessel survivability. Some commercial survivability analysis programs are used to perform the analysis for enhancement of susceptibility, vulnerability and recoverability but, they are usually classified and impossible to be exported to other countries because of their national security. In this paper, a simplified vulnerability analysis program is developed to evaluate the vulnerability of the warship in aspects of structure, redundancy and its mission capability at the conceptual design stage. To verify the developed program, the analysis results were compared with those of the commercial program MOTISS(Measure of Total Integrated System Survivability).

• The Korean Journal of Applied Statistics
• /
• v.28 no.1
• /
• pp.49-60
• /
• 2015

Various kinds of ordination methods such as correspondence analysis and canonical correspondence analysis are used in community ecology to visualize relationships among species, sites, and environmental variables. Ter Braak (1986), Jackson and Somers (1991), Parmer (1993), compared the ordination methods using eigenvalue and distance graph. However, these methods did not show the relationship between population and biplot because they are only based on surveyed data. In this paper, a method that measures the extent to show population information to biplot was introduced to compare ordination methods objectively.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.305-315
• /
• 2007

Broadband Convergence Network (BcN) is the network which unifies telephone network, the Internet and broadcasting networks. Threats to each network can bring serious problems in BcN environment since the whole network can be damaged by various types of attack. The purpose of this study is to suggest the prototype of intrusion-tolerant network design of BcN to guarantee the continuous operation of BcN services against malicious attacks. First, BcN service components, selected by analysis of service time and coverage importance, are classified into three groups by their type: server type, gateway type and hybrid type. Second, the necessity of applying intrusion tolerance on BcN services is deduced by possible attack scenarios on BcN. Finally, we suggest the intrusion-tolerant network design suitable to BcN, using hardware redundancy and secure policies. Also, we present that the suggested network design can increase the intrusion tolerance of BcN.