• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.572-580
• /
• 2013

IEEE 802.15.4e is a prospective standard for low latency control application in industries. This paper proposes a framework to evaluate the closed loop IEEE 802.15.4e based WNCS performance. The framework consists of two models: closed loop control system model and network model. The network model focuses on the PHY parameters of wireless link and takes the channel parameters into consideration. The PHY model combining with MAC model gives the control system model the probability of packet loss in a super-frame. In addition, redundancy mechanism is considered in IEEE 802.15.4e to reduce to data frame loss probability. The simulation is implemented in Matlab, PHY model takes the channel parameters from empirical results. Hence our evaluation gives insight into behavior of WNCS in different environments and it provides us a tool to design wireless network to achieve a good performance for control system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.109-119
• /
• 2013

This paper presents the design of the Safety Programmable Logic Controller (SPLC) used in the Nuclear Power Plants, an analysis of a reliability for the SPLC using a markov model. The architecture of the SPLC is designed to have the multiple modular redundancy composed of the Dual Modular Redundancy(DMR) and the Triple Modular Redundancy(TMR). The operating system of the SPLC is designed to have the non-preemptive state based scheduler and the supervisory task managing the sequential scheduling, timing of tasks, diagnostic and security. The data communication of the SPLC is designed to have the deterministic state based protocol, and is designed to satisfy the effective transmission capacity of 20Mbps. Using Markov model, the reliability of SPLC is analyzed, and assessed. To have the reasonable reliability such as the mean time to failure (MTTF) more than 10,000 hours, the failure rate of each SPLC module should be less than $2{\times}10^{-5}$/hour. When the fault coverage factor (FCF) is increased by 0.1, the MTTF is improved by about 4 months, thus to enhance the MTTF effectively, it is needed that the diagnostic ability of each SPLC module should be strengthened. Also as the result of comparison the SPLC and the existing safety grade PLCs, the reliability and MTTF of SPLC is up to 1.6-times and up to 22,000 hours better than the existing PLCs.

• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.329-334
• /
• 2011

This paper presents improvement of compression rate for SPIHT algorithm based on wavelet compression through redundancy bit removing. Proposed SPIHT algorithm uses a method to select of optimized threshold from feature of wavelet transform coefficients and removes sign bit only if coefficient is LL area. Finally Proposed SPIHT algorithm applies to Huffman coding. Experimental results show that the proposed algorithm achieves more improvement bit rate and more fast progressive transmission with low bit rate.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.90-95
• /
• 2000

In order to enhance the confidence in the mobile communication and improve the performance of the bit error, we have been using coding method. In the case of this, we have to add redundancy bits by using error correcting codes such as the block or convolutional codes. However, the result of redundancy bits causes to improve confidence. but to drop the efficiency in the bandwidth. We have studied coding method that we are able to get the good coding gain without any changes in the data transmission rates in the limited bandwidth. In this Paper, we design TCM(Trellis Coded Modulation) which was proposed by Ungerboeck and MTCM(Multiple TCM), with multiplicity(k＝2), which was proposed by Divsalar, using the optimum encoder. As state number is varied in the optimum encoder, we compare the performance of the TCM and MTCM by using Monte Carlo simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1655-1662
• /
• 1993

In this paper we discuss three algorithms-Direct, Successive, and Recursive-on parallel CRC(Cyclic Redundancy Check) verification. The algorithms are derived by combining the byte-syndromes precomputed from the generator polynomial. These algorithms are compared in terms of the amount of hardware and the speed of operation. Since the algorithms can be generalized easily, we took the ATM cell delineation example for easier description. As an application of the algorithm Recursive, an ATM cell delineation module suitable for STM-1 transmission has been successfully realized through commercially available field programmable gate arrays.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.64-72
• /
• 1995

We propose a new image coding method which takes into account both statistical redundancy and perceptual irrelevancy of the DCT coefficients so as to provide a high quality of the reconstructed images with a reduced transmission bit rate First, a block of DCT coefficients are decomposed into 16 subvectors so as for a subvector to convey key information about one of the low-pass or the dirctional filtered images. Then, the most significant subvector is selected as the principal edge of the block and then vector quantized. After that, the residuals of the block are computed and then sequentially quantized through aforementioned procedure until the quantization distortion is smaller than the target distortion. The proposed scheme is good at encoding images with a variety of transmission bit rates, especially at very low bit rate coding. In addition, it is another benifit of the proposed scheme that an image can be quantized with a wide range of the transmission bit rates by simply adapting the stopping criterion of the sequential vector quantizer according to the target distortion of the reconstructed image.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.2
• /
• pp.29-36
• /
• 2003

This paper proposes a new 3D image transmission technique using digital watermarking for compatibility with conventional 2D digital TV. To transmit 3D images effectively, generally, we use image sequence transmission using temporal-spatial redundancy between stereo images. It is difficult for users with conventional digital TV to watch the transmitted 3D image sequence because of effectivity of 3D image compression. To improve such problem, in this paper, we perceive the concealment of new information of digital watermarking and conceal information of the other stereo image into three channels of the reference image. So we can watch the image with 3D TV as well as conventional digital TV when it is decoded.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.1
• /
• pp.62-77
• /
• 2010

Emerging applications with high data rates will need to transport bulk data reliably in wireless sensor networks. ARQ (Automatic Repeat request) or Forward Error Correction (FEC) code schemes can be used to provide reliable transmission in a sensor network. However, the naive ARQ approach drops the whole frame, even though there is a bit error in the frame and the FEC at the bit level scheme may require a highly complex method to adjust the amount of FEC redundancy. We propose a bulk data transmission scheme based on erasure-resilient code in this paper to overcome these inefficiencies. The sender fragments bulk data into many small blocks, encodes the blocks with LT codes and packages several such blocks into a frame. The receiver only drops the corrupted blocks (compared to the entire frame) and the original data can be reconstructed if sufficient error-free blocks are received. An incidental benefit is that the frame error rate (FER) becomes irrelevant to frame size (error recovery). A frame can therefore be sufficiently large to provide high utilization of the wireless channel bandwidth without sacrificing the effectiveness of error recovery. The scheme has been implemented as a new data link layer in TinyOS, and evaluated through experiments in a testbed of Zigbex motes. Results show single hop transmission throughput can be improved by at least 20% under typical wireless channel conditions. It also reduces the transmission time of a reasonable range of size files by more than 30%, compared to a frame ARQ scheme. The total number of bytes sent by all nodes in the multi-hop communication is reduced by more than 60% compared to the frame ARQ scheme.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1144-1153
• /
• 2015

The resonant mechanism of reradiation interference (RRI) over 1.7MHz from power transmission lines cannot be obtained from IEEE standards, which are based on researches of field intensity. Hence, the resonance is ignored in National Standards of protecting distance between UHV power lines and radio stations in China, which would result in an excessive redundancy of protecting distance. Therefore, based on the generalized resonance theory, we proposed the idea of applying model-based parameter estimation (MBPE) to estimate the generalized resonance frequency of electrically large scattering objects. We also deduced equation expressions of the generalized resonance frequency and its quality factor Q in a lossy open electromagnetic system, i.e. an antenna-transmission line system in this paper. Taking the frequency band studied by IEEE and the frequency band over 1.7 MHz as object, we established three models of the RRI from transmission lines, namely the simplified line model, the tower line model considering cross arms and the line-surface mixed model. With the models, we calculated the scattering field of sampling points with equal intervals using method of moments, and then inferred expressions of Padé rational function. After calculating the zero-pole points of the Padé rational function, we eventually got the estimation of the RRI’s generalized resonant frequency. Our case studies indicate that the proposed estimation method is effective for predicting the generalized resonant frequency of RRI in medium frequency (MF, 0.3~3 MHz) band over 1.7 MHz, which expands the frequency band studied by IEEE.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1939-1947
• /
• 1999

This paper proposes new line code BIM (Bit Insertion and Manipulation) that is designed to overcome the problems of existing line codes. The block code, one of typical existing line code, has good transmission performance but difficulty in implementation. The other typical existing line code, bit insertion code, is easy to implementation but has bad transmission performance. BIM code in this paper could provide not only good performance but also provides simplicity in the implementation by combining the good points of block code into it of bit insertion code properly. In this paper, 5B6B type BIM code is designed. Designed 5B6B BIM code shows good transmission performance such $\pm$2 DSV, 0 RSD, 7 maximum run length and also it can be implemented under 2000 gates and need only 1 bit redundancy.