• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.34-41
• /
• 1999

To examine the increase of paper strength by solvent-bonding using N-methylmorpholine N-oxide (NMMO), a paper was treated with aqueous solutions of NMMO, concentrated at $90^\circ{C}$ for selected periods of time, and pressed for 5 seconds followed by washing and drying. The effect of the increasing NMMO concentration on bonding state and some important properties of samples were mainly investigated. With increasing concentration of NMMO, the degree of bonding between fibers was increased, the fiber cross-sectional shape was changed from 'thin ribbonlike' to 'round rodlike' by swelling with solvent, and the longitudinal waves (crimp) were introduced to fibers, hence the shrinkage, weight per unit area, and thickness of paper were increased. Consequently, the tensile strength and elongation, under standard and wet conditions, and the stiffness were increased, and the water absorption was decreased generally with increasing concentration of NMMO. The moisture regain of treated samples was lower than that of the untreated sample, because of the reduction of space between fibers. But the moisture regain was increased a little with increasing concentration of NMMO due to the fiber swelling with NMMO followed by structural relaxation.

• Journal of Magnetics
• /
• v.19 no.4
• /
• pp.340-344
• /
• 2014

An effective process was employed for synthesizing anisotropic magnetic $SmCo_7$-type alloy flakes with high coercivity, which is highly desirable for many applications. The highest coercivity of 16.3 kOe corresponds to a typical flake thickness of 200 nm for the 3-h ball-milled sample. The anisotropy field was calculated by measuring the parallel and perpendicular directions to the easy magnetization direction of the powders. The anisotropy field decreased with the increase of the ball milling time, thus indicating that the decrease of coercivity was mainly caused by the reduction of the anisotropy field. Microstructure analysis indicated that the morphology, grain size, and anisotropy field of these samples have a great influence on the magnetic properties.

• Journal of Nutrition and Health
• /
• v.26 no.1
• /
• pp.47-55
• /
• 1993

To investigate the effects of exercise-training on serum lipids, fat distribution and several parameters of body fatness(percent body fat, skinfolds thickness, body circumference) were assessed in 24 healthy male subjects submitted to an 8-wk high intensive exercise-training. Blood sample was taken twice, per and post exercise-training, Exercise-training took place 5 days a week and daily energy intake and expenditure were observed. The results obtained are summarized as follows: 1) Through exercise-training body weight (changes : 1.1$\pm$1.1kg ; p=0.000) and percent body fat (changes : 2.4$\pm$1.3% ; p=0.000) decreased significantly . 2) Suprailiac was the most reduced site by exercise-training among eight site skinfolds. Central skinfolds were changed more by exercise-training than peripheral skinfolds with reduction of 1.7$\pm$1.7mm and 0.2$\pm$1.9mm. Central site circumferences were reduced more by exercise-training than peripheral site circumferences. 3) Total cholesterol, HDL-cholesterol and LDL-cholesterol were not significantly changed by exercise-training while only triglyceride decreased (changes : 20.7$\pm$44.8mg/dl ; p<0.05). Changes in body weight were grately related to changes in total cholesterol. Changes in deep abdominal adipose tissue were related to changes in triglyceride.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.373-379
• /
• 2020

In this study, TiN-coated cBN (cubic-structure boron nitride) powders were successfully synthesized by a sol-gel method using titanium (IV) isopropoxide (TTIP) and by controlling the heat treatment conditions. After the sol-gel process, amorphous nano-sized TiO_x was uniformly coated on the surface of cBN powder particles. The obtained TiO_x-coated cBN powders were heated at 1,000~1,300℃ for 1 or 6 h in a flow of 95%N₂-5%H₂ mixed gas. With increasing temperature, the chemical composition of the TiO_x coating layer changed in the order of TiO₂→Ti₆O₁₁→Ti₄O₇→TiN due to reduction of the Ti ions. The TiN coating layer was observable in the samples heated at 1,200℃ and appeared as the main phase in the sample heated at 1,300℃. The resulting thickness of the TiN coating layer of the sample heated at 1,300℃ was approximately 45~50 nm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.288-291
• /
• 2001

To provide functional properties in fish meat paste, enoki mushroom (Flammulina velutipes) having anticarcinogenic effect and reduction of blood pressure was added at 1, 5, 10, 15, and 20%. The fried fish meat pastes were investigated for color, rheological properties, and sensory evaluation. Increasing the amount of mushroom in the fish meat paste tended to decrease the lightness (L) in Hunter color value, but to increase the redness (a) and yellowness (b). All test samples with 3mm thickness had good flexibility and did not break even after 4 times folds. The sample containing 15% mushroom showed the highest values in strength, gumminess and brittleness. In sensory evaluation, the higher amounts of mushroom obtained favorite score in color and flavour and 5% mushroom sample had the best score in overall acceptance. Therefore, this results suggest that enoki mushroom can be applied to fish meat paste for the purpose of high quality and functionality.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.351-358
• /
• 2011

Purpose: The inflammatory phase is considered an integral part of adult wound healing, but fetal wound healing studies have shown scarless healing results in the absence of the inflammation process. The COX-2 pathway is an essential component of inflammation. The purpose of this study is to identify the effect of a topical selective COX-2 inhibitor on inflammation in rabbit skin wound healing and scarring. Methods: Full-thickness wounds were made on 6 New Zealand rabbits' ears. Topical 5% celecoxib + vehicle (experimental tissue) and vehicle only (controlled tissue) were applied daily for 14d on each side of the ears. Scar samples were harvested at 2 wks, 4 wks, and 8 wks after the wounding. Each sample was stained with hematoxylin and eosin and the Masson's trichrome stain to evaluate inflammation and scar formation. Results: Histological analysis demonstrated a significant reduction of inflammation, neovascularization, and scar elevation in the experimental tissue as compared to the control. Additionally, experimental tissue exhibited faster improvement of collagen organization similar to that of normal tissue. Conclusion: This study suggests that the topical application of a selective COX-2 inhibitor on a rabbit ear wound resulted in decreased inflammation and had a positive effect on the reduction of scar formation.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.15-20
• /
• 2011

The effects of conventional rolling (CR) and differential speed rolling (DSR) on the microstructure and mechanical properties of a copper alloy sheet were investigated in detail. A copper alloy with thickness of 3 mm was rolled to a 50% reduction at ambient temperature without lubrication with a differential speed ratio of 2:1; sample was then annealed for 0.5h at various temperatures from 100 to $800^{\circ}C$. Conventional rolling, in which the rolling speed of the upper and lower rolls is identical, was performed under the same rolling conditions. The shear strain introduced by the CR showed positive values at positions on the upper roll side and negative values at positions on the lower roll side. However, the shear strain showed a zero or positive value at all positions for the samples rolled by the DSR. The microstrucure and mechanical properties of the as-rolled copper alloy did not show very significant differences between the CR and DSR for the microstructure and mechanical properties. However, those properties showed very significant differences in the case of the annealed samples. The effects of rolling method on the microstructure and mechanical properties of the as-rolled and subsequently annealed materials are discussed in terms of the shear strain.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.580-597
• /
• 2013

Three materials SUS304, 9% Ni steel and Al 5083-O alloy, which are considered possible candidate for International Maritime Organization (IMO) type B Cargo Containment System, were studied. Monotonic tensile, fatigue, fatigue crack growth rate and Crack Tip Opening Displacement tests were carried out at room, intermediate low ($-100^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures. The initial yield and tensile strengths of all materials tended to increase with decreasing temperature, whereas the change in elastic modulus was not as remarkable. The largest and smallest improvement ratio of the initial yield strengths due to a temperature reduction were observed in the SUS304 and Al 5083-O alloy, respectively. The fatigue strengths of the three materials increased with decreasing temperature. The largest increase in fatigue strength was observed in the Al 5083-O alloy, whereas the 9% Ni steel sample showed the smallest increase. In the fatigue crack growth rate test, SUS304 and Al 5083-O alloy showed a decrease in the crack propagation rate, due to decrease in temperature, but no visible improvement in da/dN was observed in the case of 9% Ni steel. In the Crack Tip Opening Displacement (CTOD) test, CTOD values were converted to critical crack length for the comparison with different thickness specimens. The critical crack length tended to decrease in the case of SUS304 and increase for the Al 5083-O alloy with decreasing temperature. In case of 9% Ni steel, change of critical crack length was not observed due to temperature decrease. In addition, the changing material properties according to the temperature of the LNG tank were analyzed according to the international code for the construction and equipment of ships carrying liquefied gases in bulk (IGC code) and the rules of classifications.

• Journal of Periodontal and Implant Science
• /
• v.52 no.6
• /
• pp.466-478
• /
• 2022

Purpose: Coronally advanced split-or full-thickness (CAST or CAFT) flaps in combination with subepithelial connective tissue grafts (SCTGs) are commonly used in root-coverage procedures despite postoperative pain and bleeding from the graft donor site. Therefore, the modified vestibular incision subperiosteal tunnel access procedure (VISTAX) uses a novel collagen matrix (VCMX) instead of autogenous tissue to address the limitations associated with autogenous tissue grafting. This retrospective study compared the clinical outcomes of VISTAX to the results obtained after using a CAST or CAFT flap in combination with SCTG for root coverage. Methods: Patients with single or multiple adjacent recession I/II defects were included, with 10 subjects each in the VISTAX, CAFT, and CAST groups. Defect coverage, keratinized tissue width, esthetic scores, and patients' perceived pain and dentinal hypersensitivity (visual analogue scale [VAS]) were assessed at baseline, 3 months, and 6 months. Results: All surgical techniques significantly reduced gingival recession (P<0.0001). Defect coverage, esthetic appearance, and the reduction in dentinal hypersensitivity were comparable. However, the VAS scores for pain were significantly lower in the VISTAX group than in the CAFT and CAST groups, which had similar scores (P<0.05). Furthermore, the clinical results of VISTAX and CAFT/CAST generally remained stable at 6 months. Conclusions: The clinical outcomes of VISTAX, CAFT, and CAST were comparable. However, patients perceived significantly less pain after VISTAX, indicating a potentially higher patient acceptance of the procedure. A prospective trial with a longer follow-up period and a larger sample size should therefore evaluate VISTAX further.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.1 no.2
• /
• pp.74-81
• /
• 1987

The reduction in dielectric strength of insulating polymer material when applying electric field is known to be substantial due to the trapped carrier effect. In this study, the carrier property of Biaxially-Drawn polypropylene, which has superior heat-resistance compared to ordinary one, is examined to improve electrical characteristics by measuring TSC spectra as a function of electric field applied to a sample of ($50{\mu}m$) thickness film. The TSC spectra in the temperature range of 303-413(K) and electric field of 2-80(MV/m) have shown no observable effect below 12(MV 1m) but TSC currents of Hetero-and Homo-peaks formed from trapped space charger and space charger injected from electrode have been observed above that point, which seems eventually lead to dielectric breakdown. Finally, this study has shown the superior dielectric proporty of Biaxially-Drawn polypropylene film compared to the non-oriented one for electrical insulation.