• 대한기계학회논문집A
• /
• 제37권11호
• /
• pp.1407-1413
• /
• 2013

하이브리드 굴삭기는 기존 굴삭기와 달리 선회구동계에 유압모터를 대신하여 선회전동기를 사용하고 있다. 하이브리드 굴삭기의 신뢰성을 평가하고 보증하기 위해서는 기계와 전기적인 고장모드가 조합되어 고려되어야 한다. 특히, 하이브리드 굴삭기용 선회감속기는 가혹한 실외환경에서 운용되므로 시작품에 대한 현장작동조건을 고려한 가속수명시험이 수행되어야 한다. 본 연구에서는 선회구동계 중선회감속기에 대한 가속수명시험 기법의 개발을 위하여 FMMA, FMAECA, FTA 및 QFD와 같은 정성적 신뢰성기법을 활용하였고, 개발된 가속조건에 의한 수명시험결과를 유분석 기법 등을 활용 분석하여 평가대상 시료가 목표 신뢰도를 만족함을 확인하였다.

• Composites Research
• /
• 제36권3호
• /
• pp.154-161
• /
• 2023

본 연구에서는 경량화를 위해 금속 링크를 탄소섬유/에폭시 복합재 링크로 대체하고자 파손 기준을 이용하여 복합재 링크가 주어진 하중 조건을 견딜 수 있는지를 평가하였다. 복합재의 파손 양상을 예측하기 위해 MMF 기준을 이용하였고, 기계적 시험을 수행하여 MMF의 기준 강도 파라미터를 구하였다. 연구결과 링크의 구멍 주위에서 응력집중이 발생하였고, 특히 굽힘 하중을 받을 때 링크 끝단과 구멍 주위에서 취약함이 드러났다. 파손 지수로부터 파손 양상을 예측하였고 매트릭스 인장 파손이 링크 끝단에서, 그리고 구멍 주위에서는 섬유의 압축 파손이 예측되었다. 본 연구를 통해 확보된 방법과 결과는 경량화를 위해 금속 부품을 탄소섬유/에폭시 복합재로 대체할 때 특정 하중 조건 하에서 복합재의 안전성을 평가하는 유용한 지침으로 활용할 수 있을 것이다.

• 한국임상수의학회지
• /
• 제32권5호
• /
• pp.399-403
• /
• 2015

복막투석은 혈액에서부터 오는 체액과 노폐물을 교환하는 복강내의 막인 복막을 이용한 투석방법으로, 신부전과 중독증 환자에서의 치료법이다. 본 연구에서는 신부전증 개에서 자동투석기를 이용한 복막투석의 치료효율과 합병증에 대해 평가하였다. 10마리의 개를 대상으로 Swan neck 카테터(Neonatal, Coviden)와 자동 복막투석기를 사용하여 복막투석을 실시하였고, 그 효과는 요소감소율(urea reduction ratio)로 평가하였다. 평균 크레아틴닌 감소율과 평균 요소감소율은 $7.09{\pm}3.84$과 $145.8{\pm}48.5$였다. 평균 투석횟수는 $6{\pm}1$회 였다. 투석치료후 유의성 있는 요소의 감소가 7/10 개에서 관찰되었고, 유의성 있는 크레아틴의 감소가 9/10 개에서 관찰되었다. 요소의 감소율이 크레아틴 감소율보다 더 높게 관찰되었다. 1회 투석당 요소와 크레아틴닌의 감소율은 $0.064{\pm}0.023$과 $0.065{\pm}0.023$이 였다. 본 연구에서의 복막투석에 따른 합병증은 카테터 막힘, 투석액의 피하누출, 패혈성 복막염, 저알부민혈증, 과수화 등이었다. Swan neck 카테터와 자동 복막투석기를 이용한 복막투석은 임상에서 적용 가능하였으며 본 연구를 통하여 성공적인 복막투석의 가능성을 보여주었다. 하지만 합병증을 최소화하기 위해서는 주의 깊은 모니터링이 필요할 것으로 판단된다.

• 한국터널지하공간학회 논문집
• /
• 제10권4호
• /
• pp.349-360
• /
• 2008

본 논문에서는 탄소성 유한요소해석 알고리즘과 연계한 확률장 생성기법과 근접터널 조건에서의 파괴확률을 분석하였다. 유한요소 해석을 위한 이산 확률장의 생성은 빠르고 정확하며 랜덤변수의 해상도를 자유롭게 조절할 수 있는 local average subdivision 기법을 사용하였으며 터널모델링을 위해 유한요소 크기와 형상 변화 등을 적절히 고려하여 지반물성치를 적용하는 방안을 제안하였다. 예제해석 조건에 대해 강도정수의 분산정도 및 공간상관길이에 따른 파괴확률을 파악하였으며 결정론적 안정성 해석결과 및 단일랜덤변수 해석결과와 비교하였다. 강도정수의 분산특성에 따라 강도감소기법에 의한 안전율과 단일랜덤변수 해석에 의한 파괴확률의 관계를 규명하였으며 확률유한요소 해석을 통해 공간상관길이가 파괴확률에 미치는 영향을 분석하였다. 이를 통해 강도감소기법에 의한 안전율과 분산계수로부터 단일랜덤변수에 의한 파괴확률을 도출할 수 있었으며 단일랜덤변수 해석결과가 근접터널의 실제적인 파괴확률을 과소평가 할 수 있음을 파악하였다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.399-408
• /
• 2001

Tooth bleaching has been prevailing recently for its ability to recover the color and shape of natural teeth without reduction of tooth material. However, it has been reported that bleaching procedure adversely affects the adhesive bond strength of composite resin to tooth. At the same time the bond strength was reported to be regained by application of some chemical agents. The purpose of this in vitro study was to investigate the effect of the removal of residual peroxide on the composite- enamel adhesion and also evaluated fracture mode between resin and enamel after bleaching. Sixty extracted human anterior and premolars teeth were divided into 5 groups and bleached by combined technique using of office bleaching with 35 % hydrogen peroxide and matrix bleaching with 10% carbamide peroxide for 4 weeks. After bleaching, the labial surfaces of each tooth were treated with catalase, 70% ethyl alcohol, distilled water and filled with composite resin. Shear bond strength was tested and the fractured surfaces were also examined with SEM. Analysis revealed significantly higher bond strength values. (p＜0.05) for catalase-treated specimens, but water-treated specimens showed reduction of bond strength, alcohol- treated specimens had medium value between the two groups(p＜0.05). The fracture mode was shown that the catalase group and the alcohol group had cohesive failure but the water sprayed group had adhesive failure. It was concluded that the peroxide residues in tooth after bleaching seems to be removed by gradual diffusion and the free radical oxygen from peroxide prevents polymerization by combining catalyst in the resin monomer. Therefore it may be possible to eliminate the adverse effect on the adhesion of composite resin to enamel after bleaching by using water displacement solution or dentin bonding agent including it for effective removal of residual peroxide.

• Computers and Concrete
• /
• 제33권3호
• /
• pp.251-264
• /
• 2024

The present study pertains to the effects of variations in the location and size of drilled web openings on the behavior of fixed-fixed reinforced concrete (RC) beams. For this purpose, a reference bending beam with a transverse opening in each half span was tested to failure. Later, the same beam was modeled and analyzed with the help of finite element software using ABAQUS. Upon achieving close agreement between the experimental and numerical results, the location and size of the web opening were altered to uncover the effects of these factors on the shear strength and load-deflection behavior of RC beams. The experimental failure mode of the tested beam and the numerical results were also verified by theoretical calculations. In numerical analysis, when compared to the reference (D0) specimen, if the distance of the opening center from the support is 0 or h or 2h, reduction in load-bearing capacity of 1.5%-22.8% or 2.0%-11.3% or is 4.1%-40.7%. In other words, both the numerical analyses and theoretical calculations indicated that the beam behavior shifted from shear-controlled to flexure-controlled as the openings approached the supports. Furthermore, the deformation capacities, energy absorption values, and the ductilities of the beams with different opening diameters also increased with the decreasing distance of the opening from supports. Web compression failure was shown to be the predominant mode of failure of beams with large diameters due to the lack of sufficient material in the diagonal compression strut of the beam. The present study indicated that transverse openings with diameters, not exceeding about 1/3 of the entire beam depth, do not cause the premature shear failure of RC beams. Finally, shear damage should be prevented by placing special reinforcements in the areas where such gaps are opened.

• 한국산업융합학회 논문집
• /
• 제21권4호
• /
• pp.159-165
• /
• 2018

In electric agricultural machine a reduction gear is needed to convert the high speed rotation motion generated by DC motor to lower speed rotation motion used by the vehicle. The reduction gear consists of several spur gears. Spur gears are the most easily visualized gears that transmit motion between two parallel shafts and easy to produce. The modelling and simulation of spur gears in DC motor reduction gear is important to predict the actual motion behaviour. A pair of spur gear tooth in action is generally subjected to two types of cyclic stress: contact stress and bending stress. The stress may not attain their maximum values at the same point of contact fatigue. These types of failure can be minimized by analysis of the problem during the design stage and creating proper tooth surface profile with proper manufacturing methods. To improve its life expectation in this study modal and stress analysis of reduction gear is simulated using ANSYS workbench based on finite element method (FEM). The modal analysis was done to understand reduction gear deformation behaviour when vibration occurs. FEM static stress analysis is also simulated on reduction gear to simulate the gear teeth bending stress and contact stress behaviour.

• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.147-154
• /
• 2005

The creep resistance of geogrids is one of the most significant long-term safety characteristics used as the reinforcement in slopes and embankments. The failure of geogrids is defined as creep strain greater than 10%. In this study, the accelerated creep tests were applied to polyester geogrids at various loading levels of 30, 50% of the yield strengths and temperatures using newly designed test equipment. Also, the new test equipment permitted the creep testing at or above glass transition temperature($T_g$) of 75, 80, $85^{\circ}C$. The time-dependent creep behaviors were observed at various temperatures and loading levels. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. The shifting factors(AFs) were obtained using WLF equation. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results confirmed that the failure distribution of geogrids followed Weibull distribution with increasing failure rate and the lifetimes of geogrids were close to 100 years which was required service life in the field with 1.75 of reduction factor of safety. Using the newly designed equipment, the creep test of geogrids was found to be highly accelerated. Furthermore, the time-temperature superposition with the newly designed test equipment was shown to be effective in predicting the lifetimes of geogrids with shorter test times and can be applied to the other geosynthetics.

• 한국산업정보학회논문지
• /
• 제18권5호
• /
• pp.45-50
• /
• 2013

최근 시장이 확대되고 있는 SMART TV에는 다양한 기능을 위하여 내장형 카메라가 들어가게 된다. 하지만, 이로 인한 불량 또한 발생하게 되며, 특히 TV power up sequence 문제로 인한 내장형 카메라의 화면 무감 불량현상은 기존 검사장비에서 검출되기 힘든 특징을 가지고 있다. 이를 위해 오디오 쪽 컨트롤 신호를 재현할 수 있는 새로운 검사장비가 필요하지만, 시간과 많은 비용이 소요되며, 생산에 큰 영향을 준다. 본 논문에서는 이와 같은 문제점을 해결하고자 FPGA (Field Programmable Gate Array)를 활용한 불량 검출 장비를 개발하여 문제점을 빠르고 정확하게 검출하는 방법을 제시한다. 이를 통해 새로운 장비를 대체하는 비용 절감 효과와 기존 검출 테스트 시간을 약 20여초에서 10초미만으로 크게 단축시킴으로써 개발기간의 최소화 및 공정에 적용을 통한 불량률 감소를 이룰 수 있다.

• Journal of Acupuncture Research
• /
• 제19권3호
• /
• pp.156-167
• /
• 2002

The present study was carried out to determine if Scutellaria balicalensis Georgi. extract (SBGE) exerts beneficial effect against the renal failure in rabbits. Rabbits were pretreated with SBGE orally for 7 days, followed by cisplatin injection (5 mg/kg, i.p.), cisplatin injection caused an increase in serum creatinine level, which was accompanied by a reduction in GFR. The fractional excretion of Na+, K+, glucose, and phosphate increased in cisplatin-treated animals, which was prevented by SBGE pretreatment. The uptake of p-aminohippurate, an organic anion, in renal cortical slices was inhibited by the administration of cisplatin, and the effect was prevented by SBGE. cisplatin injection increased lipid peroxidation, which was prevented by SBGE pretreatment. These results indicate that lipid peroxidation plays a critical role in cisplatin-induced acute renal failure. SBGE exerts the protective effect against acute renal failure induced by cisplatin, and its effect may be attributed to an antioxidant action.