• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2965-2972
• /
• 2011

The 21th century is carried out a rearing activity of green industries as a part of friendly echo policy for preservation of earth environment. Korean government is spreaded on a whole country to setting up a goal to a sustainable growth power of national for low carbon green growth. The recently rolling stock is received the footlights as a best friendly echo transportation of transport system of automobile, airplane, ship etc., also that is playing a big role to reduction of $CO_2$ greenhouse gas and a discharge of air pollution. This study was carried out the investigation and analysis for technology trend of the system light-weighting of a recently urban railway vehicle on commercial operating in domestic and foreign countries. As the results are proposed a short-term development technology and a long-term development technology of the system light-weighting to be developed for reduction weight of urban railway vehicle.

• Health Policy and Management
• /
• v.7 no.1
• /
• pp.1-31
• /
• 1997

In many people's minds, health promotion is simply a more modern term covering roughly the same field as disease prevention or life style related reduction of the risk factors of chronic disease. A review of the modern literature of health promotion make it clear that there is more to this term than what is involved in functioning as a synonym for disease prevention. Therefore, in order to reach a clear understanding of what health promotion is, this study suggest the concept of the health balance model. Health balance is represented in terms of an equilibrium between physical, social, and life-style-related health challenges on the one hand and health potential on the other hand. Thus, health promotion strategies encompasses both the reduction of health challenges and the strengthening of health potential. Many elements of reducing health challenge are mainly related to the regulation laws. Aspects of strengthening of health potential are related to activities of health center. Therefore, health promotion strategies at a community level should be included in regional health planning which is implemented by health center.

• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.347-351
• /
• 2007

Vertical interconnect technology called 3D stacking has been a major focus of the next generation of IC industries. 3D stacked devices in the vertical dimension give several important advantages over conventional two-dimensional scaling. The most eminent advantage is its performance improvement. Vertical device stacking enhances a performance such as inter-die bandwidth improvements, RC delay mitigation and geometrical routing and placement advantages. At present memory stacking options are of great interest to many industries and research institutes. However, these options are more focused on a form factor reduction rather than the high performance improvements. In order to improve a stacked device performance significantly vertical interconnect technology with wafer level stacking needs to be much more progressed with reduction in inter-wafer pitch and increases in the number of stacked layers. Even though 3D wafer level stacking technology offers many opportunities both in the short term and long term, the full performance benefits of 3D wafer level stacking require technological developments beyond simply the wafer stacking technology itself.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.213-224
• /
• 2020

The study assesses the impact of trade liberalization factors on changes in customs revenues in Vietnam. Research data was conducted between 2002 and 2017 on the official website of the Government's Web Portal and The World Bank. This paper uses the vector error correction model to estimate the short-term and long term relationship between data series. The results have proven that tariff reductions have a positive effect on short-term and long-term customs revenues in Vietnam. However, the implementation of other international commitments on trade liberalization has positive short-term and long-term negative impacts on customs revenues in Vietnam. The study's results also show that exchange rate has no effect on changes in customs revenues in the short term but it has a strong impact on increasing customs revenues in the long run. Based on these findings, the article also suggests a number of policies to ensure customs revenues in Vietnam in future. In order to ensure customs revenues, the government of Vietnam should: (1) having some policy to improve the efficiency of customs management in Vietnam; (2) Building appropriate VND exchange rate policy; (3) Establishing reasonable non - tariff barriers to prevent fraud and ovations cause losses in customs revenues.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.2
• /
• pp.31-38
• /
• 2004

Long-term stability of two type geogrids were evaluated. Membrane drawn type geogrid showed the exponential type tensile property and textile type geogrid showed the rapid increase of tensile property closer toward the break point. Accelerated creep test was done for textile type geogrid but not done for membrane drawn type geogrid because of its thermal property. Creep strain for membrane drawn type geogrid was larger than the ultimate tensile strain by tensile test and reduction factor by creep deformation of textile type geogrid was smaller than that of membrane type geogrid.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.1
• /
• pp.93-103
• /
• 1998

The paper reports the outcome of a numerical study of flow over idealized L-shaped ribleted surfaces with two-equation turbulence models. In the present study, the Launder and Sharma's k-.epsilon. turbulence model (LS model) is basically N employed, but with a little modification of the additional .epsilon.-source term without affecting its level under 2-dimensional straining in which the term has been calibrated. Compared to the original LS model, the present model has predicted greatly improved drag reduction behavior for this geometry. As a drag reduction mechanism, it is found that the skin-friction in the riblet valleys might be sufficient to overcome the skin-friction increase near the riblet tip. The present predicted results are in good agreement with the recent DN S ones by Choi et al. (1993): differences in the mean velocity prof ile and turbulence quantities are found to be limited to the riblet cavity region. It is also found that turbulent kinetic energy and Reynolds shear stress above the riblets are also reduced in drag-reducing configurations.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.31-37
• /
• 2006

The existing tunnel survey method contains many problems of taking much measuring time, increasing construction expenses, and delaying a term of construction. Therefore the site survey system for an improvement efficiency is developed. This system will be able to solve the ewer factor and the problem of curtailment of time and expenditure. In order to solve these problems it connected a measurement equipment and a notebook computer, and developed the system which simultaneously with tunnel measurement it will be able to decide locations and errors from site at real-time. The development or the tunnel survey system minimize the error occurrence as measuring tunnel, and the probability of more or less excavation. Therefore this site survey system leads to the effect of the improvement execution quality of work, the cost reduction and the construction term reduction.

• Journal of Oral Medicine and Pain
• /
• v.43 no.4
• /
• pp.112-117
• /
• 2018

Purpose: The aim of this study is to compare the short-term effectiveness of hard and soft stabilizing appliances (H-A and S-A) in treating patients with acute temporomandibular joint (TMJ) disc displacement without reduction (DDwoR). Methods: Eighty one patients diagnosed as acute TMJ DDwoR at oral medicine of Chosun University Dental Hospital from November 2016 to September 2017 were included in this study. The subjects were divided into three groups: The control group (34 patients treated without occlusal appliance), the H-A group (31 patients treated with H-A) and the S-A group (16 patients treated with S-A). The pain intensity using Visual Analog Scale and maximum mouth opening (MMO) were evaluated every week for 8 weeks. Results: The improvement of the pain intensity and MMO in the H-A group and the S-A group compared with the control group were noted (p<0.05). Conclusions: This study suggests that hard and S-As may be equally useful in treating patients with TMJ DDwoR. S-A could be recommended to reduce the symptoms of TMJ DDwoR in short period.

• Wind and Structures
• /
• v.33 no.6
• /
• pp.423-435
• /
• 2021

Although existing algorithms can predict wind speed using historical observation data, for engineering feasibility, most use moment methods and probability density functions to estimate fitted parameters. However, extreme wind speed prediction accuracy for long-term return periods is not always dependent on how the optimized frequency distribution curves are obtained; long-term return periods emphasize general distribution effects rather than marginal distributions, which are closely related to potential extreme values. Moreover, there are different wind speed parent sample types; how to theoretically select the proper extreme value distribution is uncertain. The influence of different sampling time intervals has not been evaluated in the fitting process. To overcome these shortcomings, updated steps are introduced, involving parameter sensitivity analysis for different sampling time intervals. The extreme value prediction accuracy of unknown parent samples is also discussed. Probability analysis of mean wind is combined with estimation of the probability plot correlation coefficient and the maximum likelihood method; an iterative estimation algorithm is proposed. With the updated steps and comparison using a Monte Carlo simulation, a fitting policy suitable for different parent distributions is proposed; its feasibility is demonstrated in extreme wind speed evaluations at Longhua and Chuansha meteorological stations in Shanghai, China.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.307-307
• /
• 2006

The reduction behavior of silver ions to silver nanoparticles is an important research topic in polymer/silver salt complex membranes for facilitated olefin transport, because it has a significant effect on the long-term stability of membrane performance. In this study, the effects of solvent on the formation of silver nanoparticles and long-term membrane performance in polymer/silver salt complex membrane were investigated. This effect was assessed for the complexes of poly(N-vinyl pyrrolidone) $(PVP)/AgBF_{4}$ with the use of ionic liquid (IL), acetonitrile (ACN) and water as a solvent. Membrane performance test shows that long-term stability is strongly dependent on the kind of solvent and arranged: IL > ACN >> water.