• 임상간호연구
• /
• 제19권1호
• /
• pp.105-114
• /
• 2013

Purpose: The purpose of this study was to apply laughter therapy to clinical practice and investigate its effects on patients' anxiety and depression in order to increase the quality of nursing for patients with inflammatory bowel disease (IBD). Methods: The study was conducted based on the non-equivalent control group pretestposttest design. The participants include 20 patients with IBD in the control group and 17 in the experiment group. Data was collected from July 10th, 2011 to January 22nd, 2012. Laughter therapy was administered once a day for five consecutive days. Results: The anxiety score was significantly different between the two groups and indicates that laughter therapy is effective for reducing anxiety among patients with IBD. Futhermore, there were differences in the depression scores of the experiment group between the pre-test and post-test, but no significant differences were found between the two groups. Conclusion: The results show that laughter therapy was effective in reducing anxiety among patients with IBD but did not decrease depression directly. Considering that the experiment group had a bigger reduction rate in depression scores than the control group. However, it is expected that laughter therapy will serve as an emotional nursing intervention for patients with IBD.

• 한국지반환경공학회 논문집
• /
• 제11권4호
• /
• pp.25-31
• /
• 2010

4대강 사업이나 항만의 지속적인 건설 및 관리 등으로 인해 준설점토의 발생량은 꾸준히 증가할 것이다. 이러한 준설점토를 매립재료 등으로 유효하게 재활용하기 위해 지반공학 관련 기술자들은 많은 노력을 기울여 왔다. 그러나 준설점토가 일반적으로 매우 높은 초기 함수비를 갖고 있으며 동시에 강도 역시 매우 낮은 점을 생각하면 준설된 점토의 처리를 위한 장비의 주행성 확보나 혹은 압밀을 위해 많은 시간이 필요하다는 등의 다양한 문제에 직면하게 된다. 최근까지 경제성과 효과면에서 탁월한 시멘트를 이용한 준설점토의 처리 등에 많은 연구 성과가 발표되고 혹은 현장에서 효과적인 처리공법으로 사용되고 있지만, 시멘트 자체가 지반 내에서 6가크롬이나 수은 등의 중금속을 유출하는 경우 환경 부하의 증가 뿐만 아니라 지하수를 통한 오염 확산 등에서 우려되는 점이 없지 않다. 따라서 가급적 시멘트 혼합비를 낮출 수 있는 방안에 대한 검토가 이루어져야 한다는 것이 저자들의 판단이며 이를 위해 빈배합 시멘트 혼합점토의 거동에 대해 연구를 수행하였다. 본 논문에서는 특히 압밀 특성에 초점을 맞추어 분석하였으며 연구 결과 압밀 침하량의 억제와 압밀속도의 증가가 동시에 나타나는 시멘트 고화제 혼합비 시작점은 4%~6% 정도인 것을 확인하였다.

• 한국가스학회지
• /
• 제9권4호
• /
• pp.11-16
• /
• 2005

스테인리스 강재인 STS444에 있어서 용접조건에 따른 수소취성 거동을 고찰하고자 수소침투실험과 기계적 인장시험을 실시하였다. 즉, $0.5MH_2SO_4+0.001M \;As_2O_3$ 수용액 중에서 $1,400 kg/cm^2$의 하중을 부가하는 동시에 전기화학 부식시험 장치로 $30mA/cm^2$전류를 60분간 인가하여 수소를 침투시킨 후 기계적 인장시험을 통해서 STS444용접부의 수소취성 특성에 관해서 고찰하였다. STS444에 있어서 용접조건이 수소취성에 미치는 특성을 연구한 결과, 용접 전 기름이나 물의 흡착에 의해 인장강도나 연신율은 낮아진다. 또한 기름이나 물이 흡착함으로써 수소취성에 의한 인장응력 및 연신율의 감소율은 더 크게 나타나고, 용접 전 물의 흡착이 기름의 흡착보다 수소취성에 민감하다.

• 공업화학
• /
• 제24권4호
• /
• pp.416-422
• /
• 2013

알지네이트에 은이온을 첨가하기 위하여, 질산은 수용액을 이용하여 은-알지네이트를 제조하였다. 본 연구에서는 은-알지네이트를 Poly vinylpyrrolidone (PVP) 수용액과 블렌드하였고, 전기방사는 블렌드 용액을 이용하여 수행하였다. 은-알지네이트/PVP 혼합 용액의 항균효과는 colony counting test로 대장균과 포도상 구균에 대해 확인하였다. 은-알지네이트/PVP 혼합용액의 전기방사 조건은 조성물의 농도를 다양하게 하여 방사거리 22 cm, 방사속도 0.01 mL/min, 전압 26 kV 조건하에서 수행하여 나노섬유를 제조하였다. 은-알지네이트 나노 섬유의 형태와 크기는 SEM과 Image J를 통해 확인하였으며, 전기방사된 SA5P15 섬유들의 평균 직경은 124 nm를 보였으며, 균일하게 방사되는 것을 확인하였다. SA5P15의 균 감소율은 24 시간 후 99.9%를 보였다.

• 한국식품조리과학회지
• /
• 제32권1호
• /
• pp.123-135
• /
• 2016

The purpose of this study was to evaluate the effectiveness of an intervention program using dietary consult and physical exercise conducted by public health center in Chuncheon city for obese adults. This study used a pretest-posttest design. The subjects were 58 out of 90 obese adults with body mass index (BMI) greater than $25kg/m^2$ who completed all education sessions for 8 weeks. Data on dietary habits, dietary behaviors, nutritional knowledge, anthropometric parameters and biochemical indices and daily nutrient intakes assessed by a 24-hour recall were collected before and after the intervention program., in order to evaluate program effectiveness. After the intervention, there were positive changes in exercise status and dietary habits and nutrition knowledge accuracy. Especially, the answer of 'I drink a cup of milk every day' were significantly improved (p<0.001), and the answer of 'I don't overeat', which is a dietary attitude question was significantly improved (p<0.05). Dietary intakes of most of nutrients were not significantly different between pre-test and post-test. But calcium (p<0.05), potassium (p<0.05), vitamin A (p<0.01), vitamin E (p<0.05), and folic acid (p<0.05) were significantly increased in the female group after the intervention. Weight (p<0.05), BMI (p<0.01), blood pressure (p<0.001), were significantly decreased after program, but changes of skeletal muscle mass, body fat mass were not significant. Resting heart rate (p<0.01), flexibility (p<0.001), whole body reaction (p<0.05), grip strength (p<0.01) and balance (p<0.01) showed positive changes after the intervention. Blood glucose level in serum was significantly decreased (p<0.001). These results indicated that dietary education and exercise program was effective not only for weight reduction but also for the improvement of physical fitness in obese adults.

• 멤브레인
• /
• 제28권3호
• /
• pp.169-179
• /
• 2018

본 연구는 역삼투막의 물리-화학적 표면 개질을 통하여 친수성 증가에 따른 내오염성 및 내염소성을 향상하고자 하였다. 자외선조사로 상용막 표면을 활성화한 후 실란 커플링제를 sol-gel법으로 개질하여 염소에 대한 민감도를 낮춰 폴리아마이드 활성층을 보호하여 내염소성을 향상시켰다. 또한, 에폭사이드의 개수가 다른 PGPE, SPE 두 종류의 에폭시로 코팅 후 에폭사이드의 개환반응으로 내오염성을 향상시켰으며, 표면 개질 조건은 접촉각과 FT-IR, XPS 분석을 통해 최적화하였다. 실란-에폭시 개질막의 오염성 평가 결과 투과도 감소율이 상용막보다 약 1.5배 감소하였고, 내염소성 평가 결과 $20,000ppm{\times}hr$에서도 염제거율이 90% 이상 유지되었다.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• 한국한의학연구원논문집
• /
• 제9권2호
• /
• pp.121-130
• /
• 2003

The goal of this study is construction and efficacy evaluation of MPC-25 (Magnetic Pain Control-25), a medical device using magnetic stimulation. MPC-25 consists of a main body containing power supply and control module and a bed containing magnetic core and coil. In distinction from electric pain control medical devices, magnetic pain control system is non-contact, so the patients need not take off their clothes to be treated. High amplitude current pulses are applied to a magnetic coil and induce time varying magnetic field generating eddy current in a conductor like human body. Clinical efficacy test was performed in patients suffering from musculoskeletal pain of lumbar, shoulder and joint. Degree of pain before and after treatment for 30 minutes was compared using Visual Analogous Scale. As a result, 14 cases out of 20 showed decreased pain perception, so the rate of efficacy is 70%. Reduction of pain perception was statistically significant (P=0.001 by Wilcoxon Signed Rank Test).

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.137-144
• /
• 2010

팽이기초에 대한 일본과 국내에서 현재까지 공통적으로 연구되고 있는 것은 팽이기초의 현장재하실험에 대한 지지력과 침하량에 주목되어 있다. 그러나 팽이기초에서 선행되어야할 연구는 공법 자체가 상재하중을 하부에 어떠한 원리로 전달되는 지에 대한 분석이 수행되어야 한다. 이에 본 연구에서는 일본에서 개발된 Top-Base Foundation과 국내에서 개발된 부양형 팽이기초의 응력전달 메커니즘을 수치해석 및 실내모형실험을 통하여 분석하였다. 팽이기초의 하중전달 메커니즘을 분석한 결과 상재하중에 대한 팽이기초 자체의 하중저감 분담률은 주로 팽이기초와 쇄석사이에서 발생하는 주면마찰력이 가장 크게 나타났다. 또한, 팽이기초의 내부응력분산효과를 포함한 Top-Base Foundation의 총 응력분산각은 $41.8^{\circ}$이며, 부양형 팽이기초의 총 응력분산각은 $44.5^{\circ}$로 산정되었다.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.41-51
• /
• 2018

In case of evaluating the bond stress of a void deck plate using a wire steel, there is no standard formula considering both the influence on the void and the type of the reinforcing bar. Therefore we proposed a model equation considered the bond characteristics of the void deck plate. A total of 46 specimens was carried out a direct pull-out test and the test variables were the presence of a void body, type of reinforcing bar, the inner cover thickness according to the location of reinforcing bars and bond region. As a result of the comparison between the steel bar and steel wire, the bond stress of the steel wire with the relative rib area of 0.071 is 4.5 ~ 28.58% lower than that of the steel bar with 0.092 and the bond stress reduction rate increases when the inner cover thickness is insufficient. In the case of the inner cover thickness of $1.7d_b$ and $2.7d_b$, the bond stress was reduced to 48.7 ~ 68.4%. In the inner cover thickness was $4.9d_b$ and $5.2d_b$, the bond stresses were equivalent to those of the solid specimens. It was confirmed that the average bond stress and strain were affected by the inner cover thickness. Therefore the predicted model for one module of the void deck plate is proposed and verified by considering the bond characteristics of the void deck plate.