• Structural Engineering and Mechanics
• /
• 제67권5호
• /
• pp.527-544
• /
• 2018

In this paper, the effect of homogenization models on stress analysis is presented for functionally graded plates (FGMs). The derivation of the effective elastic proprieties of the FGMs, which are a combination of both ceramic and metallic phase materials, is of most of importance. The majority of studies in the last decade, the Voigt homogenization model explored to derive the effective elastic proprieties of FGMs at macroscopic-scale in order to study their mechanical responses. In this work, various homogenization models were used to derive the effective elastic proprieties of FGMs. The effect of these models on the stress analysis have also been presented and discussed through a comparative study. So as to show this effect, a refined plate theory is formulated and evaluated, the number of unknowns and governing equations were reduced by dividing the transverse displacement into both bending and shear parts. Based on sinusoidal variation of displacement field trough the thickness, the shear stresses on top and bottom surfaces of plate were vanished and the shear correction factor was avoided. Governing equations of equilibrium were derived from the principle of virtual displacements. Analytical solutions of the stress analysis were obtained for simply supported FGM plates. The obtained results of the displacements and stresses were compared with those predicted by other plate theories available in the literature. This study demonstrates the sensitivity of the obtained results to different homogenization models and that the results generated may vary considerably from one theory to another. Finally, this study offers benchmark results for the multi-scale analysis of functionally graded plates.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.207-215
• /
• 2020

Vivianite (Fe₃²⁺(PO₄)2·8H₂O) and green rust ([Fe₄²⁺Fe₂³⁺(OH)^-₁₂][SO₄^2-·2H₂O]^2-), ferrous containing minerals, could remove aqueous U(VI) in 5 min. and the efficiencies of green rust were roughly 2 times higher than that of vivianite. The zeta potential measurement results implies that the better performance of green rust might be attributed to the favorable surface charge toward uranyl phosphate species. The removal behaviors of the minerals were well fitted by pseudo-second order kinetic model (R² > 0.990) indicating the dominant removal process was chemical adsorption. Effects of Ca²⁺ and CO₃^2- at pH 7 were examined in terms of removal kinetic and capacity. The kinetic constants of aqueous U(VI) were 8 and 13 times lower (0.492 × 10^-3 g/(mg·min); 0.305 × 10^-3 g/(mg·min)) compared to the value in the absence of the ions. The thermodynamic equilibrium calculation showed that the stable uranyl species (uranyl tri-carbonate) were newly formed at the condition. Surface investigation on the reacted mineral with uranyl phosphates species were carried out by XPS. Ferrous iron and U(VI) on the green rust surface were completely oxidized and reduced into Fe(III) and U(IV) after 7 d. It suggests that the ferrous minerals can retard U(VI) migration in phosphate-rich groundwater through the adsorption and subsequent reduction processes.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.119-137
• /
• 2017

Although the stall stagnation phenomena have often been experienced in site and also analytically in numerical experiments in surges in systems of compressors and flow paths, the fundamental causes have not been identified yet. In order to clarify the situations, behaviours of infinitesimal disturbance waves superposed on a main flow were studied in a simplified one-dimensional flow model. A ratio of the amplifying rate of the system instability to the characteristic slope of the compressor element was surveyed as the instability enhancement factor. Numerical calculations have shown the following tendency of the factor. In the situation where both the sectional area ratio and the length ratio of the delivery flow-path to the suction duct are sufficiently large, the enhancement factors are greater in magnitude, which means occurrence of ordinary deep surges. However, in the situation where the area ratio and/or the length ratio is relatively smaller, the enhancement factor tends to lessen significantly, which situation tends to suppress deep surges for the same value of the characteristic slope. It could result in the stall stagnation condition. In the domain of area ratio vs. length ratio of the delivery duct to the suction duct, contour-lines of the enhancement factor behave qualitatively similar to those of the stall stagnation boundaries of a fan analytically obtained, suggesting that a certain range of the enhancement factor values could specify the stagnation occurrence. The significant decreases in the factors are observed to accompany appearances of phase lags and travelling waves in the wave motions, which macroscopically suggests breaking down of the complete surge actions of filling and emptying of the air in the delivery duct. The strength of the action is deeply related with acoustic interferences and is evaluated in terms of the volume-modified reduced resonance frequency proposed by the author. These observations have shown the fundamental cause and the sequence of the stall stagnation in principle.

• 천문학회보
• /
• 제40권2호
• /
• pp.52.2-52.2
• /
• 2015

SgrA* located in the center of the Milky Way is of great interest to understand the physics of supermassive black hole(SMBH) and the interaction of the G2 cloud around SgrA* with the accretion flow which was expected since 2013. In order to seize this rare opportunity, KVN and VERA Array (so called, KaVA) has started an intensive monitoring program of SgrA* at 22/43 GHz where scatter broadening is reduced compared to lower frequency VLBI observations. We present the results of KaVA SgrA* observation together with Takahagi (32m) and Yamaguchi (32m) telescopes at 22 GHz on March 24, 2013. We have tested both a standard amplitude calibration methods using the Tsys and antenna gain information and a template amplitude calibration method which uses a peak of H2O maser line of nearby maser source (SgrB2), and found that the latter method is useful when an accuracy of Tsys measurement or antenna gain of a telescope is poor. In our comparison, the difference between the two methods is around 20% (~5% for the KVN and ~15% for the VERA when the elevation is above $20^{\circ}$). We also imaged SgrA* with a total flux of ~0.7 Jy at 22GHz, and fitted an elliptical Gaussian model which has a size of ~2.5mas for major axis and ~1.7mas for minor axis, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권1호
• /
• pp.105-110
• /
• 2017

이 논문에서는 해상에서의 환경 하중과 외력을 고려한 해상 크레인의 상하 동요 보상 시스템에 대해 연구한 내용을 소개한다. 이를 위해 강체라 가정된 해상 크레인과 유압 구동식 윈치, 탄성력을 갖는 로프, 그리고 로프 끝단의 중량물로 구성된 동역학 모델을 먼저 살펴본다. 중량물의 상하 동요 움직임을 보상하기 위해, 선형화를 통한 PD 제어를 적용했다. 또한, 비선형 시스템에 맞춘 슬라이딩 모드 제어기 및 시간 지연을 고려한 비선형 일반 예측 제어 알고리즘을 사용한 제어를 적용했으며, 그 결과 진동폭이 줄어듬을 확인할 수 있다. 결과적으로, 1초의 시간 지연을 고려하여 설계한 강인 제어기를 활용하게 되면, 상하동요 보상시스템에서 오차를 가장 많이 줄여서 본 시스템에 적합한 제어 알고리즘으로써 활용할 수 있음을 볼 수 있다.

• Journal of Microbiology and Biotechnology
• /
• 제10권6호
• /
• pp.865-872
• /
• 2000

Helocobacter phylori is the major cause of gastritis, peptic ulcer, and a principal risk factor for gastric cancer. As the firs step towards a vaccine against H. pylori infection, Hy.pylori urease was expressed and purified as a recombinant apoenzyme (rUrease) in E. coli. In order to develop an effective immunization protocol using rUrease, the host immune responses were evaluated after the oral immunization of mice with rUrease preparations plus cholera toxin relative to various conditions, such as the physical nature of the antigen, the frequency of the booster immunization, the dose of the antigen, and the route of administration. The protective efficacy was assessed using a quantitative culture following an H. pylori SS1 challenge. It was demonstrated that rUrease, due to its particulated nature, was more superior than the UreB subunit as a vaccine antigen. The oral immunization of rUrease elicited significant systemic and secretory antibody responses, and activated predominantly Th2-type cellular responses. The bacterial colonization was significantly reduced (~100-fold) in those mice immunized with three or four weekly oran doses of rUrease plus cholera toxin (p<0.05), when compared to the non-immunized/challenged controls. The protection correlated well with the elicited secretory IgA level against rUrease, and these secretory antibody responses were highly dependent on the frequency of the booster immunization, yet unaffected by the dose of the antigen (25-200$\mu\textrm{g}$). These results demonstrate the remarkable potential of rUrease as a vaccine antigen, thereby strengthening the possibility of developing an H. pylori vaccine for humans.

• 대한기계학회논문집A
• /
• 제21권8호
• /
• pp.1250-1258
• /
• 1997

This paper reports on the development of a new foot for a quadrupedal jointed-leg type walking robot. The foot has 2 toes, one at the front and the other at the rear side, for stable landing on uneven ground by point contact. The toes can move up and down independantly, guided by double-wishbone shaped parallel links which enable the lower leg to rotate with respect to a remote center on the ground surface. The motion of each toe is damped by a hydropneumatic shock absorber integrated in the foot in order to absorb the dynamic landing shock. Furthermore, the new foot can reduce the maximum hip joint drive torque by shortening the moment arm length between the hip joint and the landing force vector on the ground. Intensive experiments were carried out in this study by using a one-leg walking model to investigate the soft landing performance of the foot which could be hardly offered by conventional robot feet such as a flat plate with a gimbal type ankle joint. And it was confirmed that the hip joint torque of the leg walking on the flat surface could be reduced remarkably by using the new foot.

• 대한수의학회지
• /
• 제48권4호
• /
• pp.457-462
• /
• 2008

The objective of this study was to determine appropriate sample size that simulated different assumptions for diagnostic test characteristics and true prevalences when designing serological surveillance plan for pullorum disease and fowl typhoid in domestic poultry production. The number of flocks and total number of chickens to be sampled was obtained to provide 95% confidence of detecting at least one infected flock, taking imperfect diagnostic tests into account. Due to lack of reliable data, within infected flock prevalence (WFP) was assumed to follow minimum 1%, most likely 5% and maximum 9% and true flock prevalence of 0.1%, 0.5% and 1% in order. Sensitivity were modeled using the Pert distribution: minimum 75%, most likely 80% and maximum 90% for plate agglutination test and 80%, 85%, and 90% for ELISA test. Similarly, the specificity was modeled 85%, 90%, 95% for plate agglutination test and 90%, 95%, 99% for ELISA test. In accordance with the current regulation, flock-level test characteristics calculated assuming that 30 samples are taken from per flock. The model showed that the current 112,000 annual number of testing plan which is based on random selection of flocks is far beyond the sample size estimated in this study. The sample size was further reduced with increased sensitivity and specificity of the test and decreased WFP. The effect of increasing samples per flock on total sample size to be sampled and optimal combination of sensitivity and specificity of the test for the purpose of the surveillance is discussed regarding cost.

• 한국항행학회논문지
• /
• 제14권1호
• /
• pp.87-92
• /
• 2010

항공 임베디드 시스템은 고신뢰성 설계가 매우 중요하다. 본 논문에서는 고신뢰성 항공 임베디드 시스템 연구를 위하여 Triple Modular Redundancy(TMR) 구조의 하드웨어를 설계하였다. TMR 구조의 하드웨어가 단일 프로세서 구조의 하드웨어보다 얼마나 신뢰성이 향상 되었는지를 연구하기 위하여, ARM 프로세서와 TMR ARM 프로세서의 축소된 형태의 시뮬레이션 모델을 개발하였고 각각의 신뢰성을 평가하는 연구를 수행하였다. 신뢰성 평가는 RTL을 이용한 시뮬레이션 기반 오류 주입 시뮬레이션 기법을 이용하였다. 주입된 오류별로 타겟 시스템의 상태변화를 분석하여, 오류 복구비율을 계산하였다. 실험결과 TMR ARM의 오류복구 능력은 ARM에 비해 최대 10배 이상 향상되었으며, 특히 permanent fault에서 더 강인함을 확인 하였다.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2003년도 제2차 연례학술대회 발표논문집
• /
• pp.251-257
• /
• 2003

Metabolic engineering has become a new paradigm for the more efficient production of desired bioproducts. Metabolic engineering can be defined as directed modification of cellular metabolism and properties through the introduction, deletion, and modification of metabolic pathways by using recombinant DNA and other molecular biological tools. During the last decade, metabolic flux analysis(MFA) has become an essential tool fur metabolic engineering. By MFA, the intracellular metabolic fluxes can be quantified by the measurement of extracellular metabolite concentrations in combination with the stoichiometry of intracellular reactions and mass balances. The usefulness and functionality of MFA are demonstrated by applying to metabolic pathways in E. coli. First, a large-scale in silico E. coli model is constructed, and then the effects of carbon sources on intracellular flux distributions and succinic acid production were investigated on the basis of the uptake and secretion rates of the relevant metabolites. The results indicated that succinic acid yields increased in order of gluconate, glucose and sorbitol. Acetic acid and lactic acid were produced as major products rather than when gluconate and glucose were used carbon sources. The results indicated that among three carbon sources available, the most reduced substrate is sorbitol which yields efficient succinic acid production.