• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.828-829
• /
• 2008

This paper proposes a new pole shaped magnetizing fixture with a non uniform air gap for sinusoidal magnetizing a ring type permanent magnet (PM) to reduce the cogging torque. To obtain more sinusoidal distributed magnetic flux density, the magnetizing fixture's pole shape is optimized by using the sequential response surface method (RSM). And the effects of each design parameter were investigated using the magnetic analysis combined a time stepping finite element method (FEM) with Preisach model. It has been shown, through numerical analysis the optimized modelgives near sinusoidal distributed air gap flux density and drastically reduced cogging torque.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

• Bulletin of the Korean Mathematical Society
• /
• v.45 no.3
• /
• pp.445-456
• /
• 2008

Let M be a right R-module, G an ordered group and ${\sigma}$ a map from G into the group of automorphisms of R. The conditions under which the Malcev-Neumann module M* ((G)) is a PS module and a p.q.Baer module are investigated in this paper. It is shown that: (1) If $M_R$ is a reduced ${\sigma}$-compatible module, then the Malcev-Neumann module M* ((G)) over a PS-module is also a PS-module; (2) If $M_R$ is a faithful ${\sigma}$-compatible module, then the Malcev-Neumann module M* ((G)) is a p.q.Baer module if and only if the right annihilator of any G-indexed family of cyclic submodules of M in R is generated by an idempotent of R.

• Journal of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.721-734
• /
• 2014

Let M be a module over a commutative ring R, and let T(M) be its set of torsion elements. The total torsion element graph of M over R is the graph $T({\Gamma}(M))$ with vertices all elements of M, and two distinct vertices m and n are adjacent if and only if $m+n{\in}T(M)$. In this paper, we study the basic properties and possible structures of two (induced) subgraphs $Tor_0({\Gamma}(M))$ and $T_0({\Gamma}(M))$ of $T({\Gamma}(M))$, with vertices $T(M){\backslash}\{0\}$ and $M{\backslash}\{0\}$, respectively. The main purpose of this paper is to extend the definitions and some results given in [6] to a more general total torsion element graph case.

• Korean Journal of Microbiology
• /
• v.38 no.4
• /
• pp.250-250
• /
• 2002

This study confirmed that white rot fungus Irpex lacteus was able to metabolize 2,4,6-trinitrotoluene (TNT) with two different initial transformations. In one metabolic pathway of TNT a nitro group was removed from the aromatic ring of TNT. Hydride-Meisenheimer complexes of TNT (H/sup -/-TNT), colored dark redo were confirmed as the intermediate in this transformation by comparison with the synthetic compounds. 2,4-Dinitrotoluene as a following metabolic product was detected, and nitrite produced by denitration of $H^-$-TNT supported this transformation. In the other TNT pathway, nitro groups in TNT were successively reduced to amino groups via hydroxylamines. Hydroxylamino-dinitrotoluenes and amino-dinitrotoluenes were identified as the intermediates. The activity of a membrane-associated aromatic nitroreductase was detected in the cell-free extract of I. lacteus. This enzyme catalyzed the nitro group reduction of TNT with NADPH as a cofactor, Enzyme activity was not observed in the presence of molecular oxygen.

• International Journal of Automotive Technology
• /
• v.2 no.2
• /
• pp.47-52
• /
• 2001

For the wear protection of cylinder bore in aluminum cast material the internal plasma spraying technology offers a new economical solution. The size and the weight of the engine blocks significantly can be decreased in comparison with the traditional cast iron sleeves. The coefficient of friction between piston ring and cylinder wall sensitively can be reduced and the wear resistance increased from several factors. The paper gives an overview of the technology from the AlSi cast alloys for engine block to the non destructive testing technology used after the machining by diamond honing. The actual results in engines of different types also will be shown. The economical advantages of the plasma spraying (or the internal coating in cylinder bore also will be discussed in comparison with the different alternatives of technology. The aspect of the market introduction also will be discussed in this paper.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.5
• /
• pp.343-356
• /
• 1991

An efficient real-time implementation of digital filtering algorithms using a multiprocessor system in a ring network is investigated. The development time and cost for implementing a high speed signal processing system can be considerably reduced because algorithm are implemented in software using commercially available digital signal processors. This method is based on a parallel block processing approach, where a continuously supplied input data is divided into blocks, and the blocks are processed concurrently by being assigned to each processor in the system. This approach not only requires a simple interconnection network but also reduces the number of communications among the processors very much. The data dependency of the blocks to be processed concurrently brings on dependency problems between the processors in the system. A systematic scheduling method has been developed by using a processors which can be used efficiently, the methods for solving dependency problems between the processors are investigated. Implementation procedures and results for FIR, recursive (IIR), and adaptive filtering algorithms are illustrated.

• Journal of Microbiology
• /
• v.35 no.1
• /
• pp.15-20
• /
• 1997

Kinetic studies were done to elucidate the reaction mechanism of purine nucleoside phosphorylase (PNP) in Micrococcus Luteus. PNP catalyzes the reversible phosphorolysis of ribonucleosides to their respective base. The effect of alternative competing substrates suggested that a single enzyme was involved in binding to the active site for all purine nucleosides, inosine, deoxyiosine, guanosine, deoxyguanosine, adenosine and deoxyadenosine. Affinity studies showed that pentose moiety reduced the binding capacity and methylation of ring N-1 of inosine and guanosine had little effect on binding to bacterial enzyme, whereas these compounds did not bind to the mammalian enzymes. The initial velocity and product inhibition studies demonstrated that the predominant mechanism of reaction was an ordered bi, bi reaction. The nucleoside bound to the enzyme first, followed by phosphate. Ribose 1-phosphate was the first product to leave, followed by base.

• YAKHAK HOEJI
• /
• v.28 no.2
• /
• pp.101-127
• /
• 1984

The study of interaction between riboflavin derivatives and biologically active substances was reviewed. With combination of spectroscopic methods such as NMR, UV, Fluorescence and IR, informations about interaction mechanism including hydrogen bond formation, conformation of association complex, and association constant were obtained. 1. Riboflavin associated with adenine but not with other bases found in the nucleic acids. -CONHCO- group was included in the formation of hydrogen bond with adenine. 2. Riboflavin interacted with alcohol to make a 1 : 1 association complex through the 3N-imino and 2C-carbonyl group of the isoalloxazine ring and the hydroxyl group of the alcohols. 3. Riboflavin associated with salicylates to produce the cyclic hydrogen-bonded dimer. The strongest complex was formed with salicylic acid, a weaker one with aspirin, and an even weaker one with salicylamide. 4. Other bio-active substances, orotic acid and inhibitors such as phenol, trichloroacetic acid and indol also formed hydrogen bond with riboflavin. 5. Reduced riboflavin showed strong self-association to produce the cyclic hydrogen-bonded complex and it associated with adenine and with cytosine to form 1 : 3 complex.

• Carbon letters
• /
• v.13 no.1
• /
• pp.29-33
• /
• 2012

A novel strategy for the simultaneous reduction and functionalization of graphene oxide (G-O) was developed using polyallylamine hydrochloride (PAAH) as a multi-functional agent. The G-O functionalization by PAAH was carried out under basic conditions to catalyze the epoxide ring opening reaction of G-O with abundant amine groups of PAAH. We found that G-O was not only functionalized with PAAH but also reduced under the reaction condition. Moreover, the synthesized PAAH-functionalized G-O sheets were soluble in water and applicable to the synthesis of nanocomposites with gold nanoparticles.