• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.309-313
• /
• 2006

Pad surface characteristics such as roughness, groove and wear rate of pad have a effect on the within wafer non-uniformity(WIWNU) in chemical mechanical polishing(CMP). Although WIWNU increases as the uniformity of roughness(Rpk: Reduced peak height) becomes worse in an early stage of polishing time, WIWNU decreases as non-uniformity of the Rpk value. Also, WIWNU decreases with the reduction of the pad stiffness, though original mechanical properties of pad are unchanged by the grooving process. In addition, conditioning process causes the inequality of pad wear during in CMP. The profile of pad wear generated by the conditioning process has a significant effect on the WIWNU. These experiments results could help to understand the effect of pad surface characteristics in CMP.

• 말소리와 음성과학
• /
• 제14권3호
• /
• pp.11-25
• /
• 2022

From simultaneous recordings of the external photoglottography, intra-oral air pressure (P_io), airflow and acoustic data from four native Seoul Korean speakers (2 male and 2 female), we have found that the two fricatives are not significantly different in glottal opening peak and airflow peak height either word-initially or word-medially and that the duration of aspiration is significantly reduced in word-medial /s/, compared to those in word-initial /s/, not in /s'/. We have also found that the duration of a high P_io plateau is significantly longer in /s/ than in /s'/ both word-initially and word-medially and that airflow resistance (R=P_io/U) at the onset and offset of a P_io plateau and at the time of airflow peak height is significantly higher in /s'/ than in /s/ across the contexts. However, the differences in P_io peak and F0 are not significant. In addition, the transition time to reach airflow peak height from the offset of a P_io plateau is found to be significantly longer in /s/ than /s'/ in both word-initial and word-medial positions. No significant differences in glottal opening peak and airflow peak height confirm that /s/ is specified as [-spread glottis] like /s'/. As for the other significant differences, we propose that /s/ is [-tense], and /s'/ [+tense].

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.875-882
• /
• 2019

The effects of Triangle Groove Strips (TGS) on Vortex-induced Vibration (VIV) suppression of marine riser are numerically investigated using Computational Fluid Dynamics (CFD) method. The range of Reynolds number in simulations is 4.0 × 10⁴ < Re < 1.2 × 10⁵. The two-dimensional unsteady Reynolds-Averaged Navier-Stokes (RANS) equations and Shear Stress Transport (SST) k-ω turbulence model are used to calculate the flow around marine riser. The Newmark-β method is employed for evaluating the structure dynamics of marine riser. The effect of the height ratio (ε) of TGS on VIV suppression is evaluated. The amplitude responses, frequency responses, vortex patterns and the flow around the structures are discussed in detail. With the increase of the height ratio of TGS, the suppression effect of TGS on VIV suppression is improved firstly and then weakened. When ε=0.04, the suppression effect of TGS is the best. Compared with the VIV responses of smooth marine riser, the amplitude ratio is reduced by 38.9%, the peak of the lift coefficient is reduced by 69% and the peak of the drag coefficient is reduced by 40% when Re=6.0 × 10⁴. With the increase of Reynolds number, the suppression effect of TGS on VIV suppression is improved firstly and then weakened. When the Reynolds number is 7.0 × 10⁴, the amplitude ratio can be reduced by 40.1%. As to the large-amplitude vibration cases, the TGS show nice suppression effect on VIV.

• Physical Therapy Rehabilitation Science
• /
• 제12권2호
• /
• pp.130-139
• /
• 2023

Objective: This study aimed to analyze the effects and characteristics of the height of the treatment table on the force and time of ground reaction (GR) and contact hand (CH) generated from the therapist's feet to generate thrust during spinal manipulation (SM). Design: A cross-sectional survey study Methods: Thirty-six healthy subjects were recruited. SM was performed on the ilium using a knee-high table, where the therapist felt it was easy to control the subject's posture and body shape and comfortable to generate force, as well as a relatively high thigh-high table. The force and time generated by the therapist's GR and CH were simultaneously measured through a force plate. Results: As a result, there was a significant difference in peak force and rundown force at the therapist's GR according to the table height (p < 0.05). In the therapist's CH, there was a significant difference between PreMin (preload minimum) force and peak force (p < 0.05), and there was a significant difference between the time from PreMin to peak and the time of the entire section (p < 0.05). Conclusions: As a result, the generation of increased CH force and faster thrust duration were confirmed by mobilizing the reduced GR force of the therapist to generate thrust than the relatively high table on the knee-high table.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.38-39
• /
• 2005

We have investigated the effect of the pad surface characteristics such as roughness, groove density and wear of pad on within wafer non-uniformity(WIWNU) in chemical mechanical polishing(CMP). We found that WIWNU increases as pad surface roughness($R_{pk}$; Reduced peak height) increases in an early stage of polishing. But after polishing time goes to a certain extent, WIWNU decreases as uniformity of pad surface roughness. Also, groove of pad has effect on relative pad stiffness although original mechanical properties of pad are unchanged by grooving. WIWNU decreases as relative pad stiffness decreases. In addition, conditioning process causes non-uniform wear of pad during in CMP. The profile of pad wear has a significant effect on WIWNU.

• 한국식품과학회지
• /
• 제39권4호
• /
• pp.406-411
• /
• 2007

흑미가루 첨가비율(5-30%)에 따른 복합분의 이화학적 특성, 호화특성, mixograph 특성 및 스펀지 케이크의 제조적성을 측정하고, 이들 특성 간의 상관관계를 구명하고자 일련의 실험을 실시하였다. 흑미 가루 첨가량이 증가함에 따라서 alkaline water retention capacity, Pelshenke value, sedimentation value는 증가하였으나 water holding capacity는 감소하는 경향을 보였다. Mixograph peak time, height, width at peak와 Rapid Visco Analyser peak, minimum viscosity도 감소하였다. 스펀지 케이크 반죽의 pH와 비중은 증가하였지만 케이크의 부피는 감소하는 경향을 보였으며, 케이크의 경도는 증가하였다.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.994-998
• /
• 1999

자당-지방산 에스테르(Sucrose-fatty acid ester, SE)가 제빵특성에 미치는 영향을 분석하기 위하여 반죽특성, 호화특성, 제빵특성 및 노화방지 효과를 조사하였고, 다른 유화제와 혼합, 비교실험을 하였다. SE의 첨가에 의해 peak time과 peak height를 증가 시켜 반죽 탄성이 향상되었고. farinogram 특성은 SE 0.5, 1.0% 첨가에 의해 peak time과 mechanical tolerance index (MTI)는 증가하였고 stability는 감소하였다. 호화개시온도, 최고점도시 온도는 감소하였으며 peak viscosity는 증가하였다. 제방특성은 SE의 유화제로서의 작용에 의하여 빵의 비체적을 증가 시켰으며, 빵의 $5^{\circ}C$ 및 $25^{\circ}C$ 저장 중 경도는 무첨가구에 비해 완만한 증가양상을 나타내어 노화 지연효과가 뚜렷하였으며, 0.5% 첨가구의 제빵 및 노화 지연효과가 높게 나타났다 SE, SSL, ES-95의 단독 및 혼합하여 0.5% 수준으로 첨가하여 측정한 제빵특성은 모두 비체적을 증가시켰으며 그 중 SE (0.2%)+SSL(0.15%)+ES-95(0.15%) 혼합구의 비체적이 대조구 보다 매우 높게 나타났다. 위에서 제조한 빵의 $5^{\circ}C$ 및 $25^{\circ}C$ 저장 중 경도는 무첨가구에 비해 완만한 증가양상을 보여 노화지연효과가 뚜렷하였으며, 그 중 SE(0.25%)+SSL(0.25%)의 노화지연효과가 가장 좋게 나타났다.

• Earthquakes and Structures
• /
• 제18권2호
• /
• pp.163-170
• /
• 2020

Floor acceleration plays a major role in the seismic design of nonstructural components and equipment supported by structures. Large floor acceleration may cause structural damage to or even collapse of buildings. For precision instruments in high-tech factories, even small floor accelerations can cause considerable damage in this study. Six P-wave parameters, namely the peak measurement of acceleration, peak measurement of velocity, peak measurement of displacement, effective predominant period, integral of squared velocity, and cumulative absolute velocity, were estimated from the first 3 s of a vertical ground acceleration time history. Subsequently, a new predictive algorithm was developed, which utilizes the aforementioned parameters with the floor height and fundamental period of the structure as the new inputs of a support vector regression model. Representative earthquakes, which were recorded by the Structure Strong Earthquake Monitoring System of the Central Weather Bureau in Taiwan from 1992 to 2016, were used to construct the support vector regression model for predicting the peak floor acceleration (PFA) of each floor. The results indicated that the accuracy of the predicted PFA, which was defined as a PFA within a one-level difference from the measured PFA on Taiwan's seismic intensity scale, was 96.96%. The proposed system can be integrated into the existing earthquake early warning system to provide complete protection to life and the economy.

• 약학회지
• /
• 제22권3호
• /
• pp.157-162
• /
• 1978

Total organic carbon(TOC) can be determined by means of combustion and flame ionization detector. The principle of string method is that a sample acidified to pH2 and transferred into combustion tube by string is oxidized with air. Another combustion tube method is that organic compounds are oxidized in the combustion tube charged with CuO and cobalt asbestos after the acidified sample is injected directly by microsyringe. Carbon dioxide evolved was reduced under specially treated nickel catalyst and hydrogen, the methane produced was detected by flame ionization detector. Linear relationship was found between concentration and the peak height by the string method. The peak area in the case of combustion tube method is in the range of 1-200ppm. The coefficient of variation by string method was 2.3% and that by combustion tube method was 1.8%. The lower detectable limit was about 10mol. Advantages of the latter are simplicity, sensitivity and reproducibility. TOC in contineous stream can also be determined automatically by means of the string method.

• 전기전자학회논문지
• /
• 제19권1호
• /
• pp.94-100
• /
• 2015

본 논문에서는 U-MOSFET 내부의 기생 body 다이오드(PN diode)를 쇼트키 body 다이오드(Schottky body diode)로 대체한 50V급 전력 U-MOSFET을 제안하였다. 쇼트키 다이오드는 PN 다이오드와 비교 시, 역 회복 손실(reverse recovery loss)을 감소시킬 수 있는 장점을 가지고 있다. 따라서 전력 MOSFET의 기생 body 다이오드를 쇼트키 body 다이오드를 대신함으로써 역 회복 손실을 최소화 할 수 있다. 제안된 쇼트키 body 다이오드(Schottky body diode) U-MOSFET(SU-MOS)를 conventional U-MOSFET(CU-MOS)와 전기적 특성을 비교한 결과, 전달(transfer) 및 출력(output)특성, 항복(breakdown)전압 등 정적(static) 특성의 변화 없이 감소된 역 회복 손실을 얻을 수 있었다. 즉, 쇼트키 다이오드의 폭(width)이 $0.2{\mu}m$, 쇼트키 장벽 높이(Schottky barrier height)가 0.8eV일 때 첨두 역전류(peak reverse current)는 21.09%, 역 회복 시간(reverse recovery time)은 7.68% 감소하였고, 성능지수(figure of merit(FOM))는 35% 향상되었다. 제안된 소자의 특성은 Synopsys사의 Sentaurus TCAD를 사용하여 분석되었다.