• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.713-723
• /
• 2017

Since the panoramic image can overcome the limitation of the viewing angle of the camera and have a wide field of view, it has been studied effectively in the fields of computer vision and stereo camera. In order to generate a panoramic image, stitching images taken by a plurality of general cameras instead of using a wide-angle camera, which is distorted, is widely used because it can reduce image distortion. The image stitching technique creates descriptors of feature points extracted from multiple images, compares the similarities of feature points, and links them together into one image. Each feature point has several hundreds of dimensions of information, and data processing time increases as more images are stitched. In particular, when a panorama is generated on the basis of an image photographed by a plurality of unspecified cameras with respect to an object, the extraction processing time of the overlapping feature points for similar images becomes longer. In this paper, we propose a preprocessing process to efficiently process stitching based on an image obtained from a number of unspecified cameras for one object or environment. In this way, the data processing time can be reduced by pre-grouping images based on camera sensor information and reducing the number of images to be stitched at one time. Later, stitching is done hierarchically to create one large panorama. Through the grouping preprocessing proposed in this paper, we confirmed that the stitching time for a large number of images is greatly reduced by experimental results.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.179-185
• /
• 2019

This paper proposes a block-type classification based image binarization for the implementation of the low-power feature extraction algorithm. The proposed method can be implemented with threshold value re-use technique approach when the image divided into $64{\times}64$ macro blocks size and calculating the threshold value for each block type only once. The algorithm is validated based on quantitative results that only a threshold value change rate of up to 9% occurs within the same image/block type. Existing algorithms should compute the threshold value for 64 blocks when the macro block is divided by $64{\times}64$ on the basis of $512{\times}512$ images, but all suggestions can be made only once for best cases where the same block type is printed, and for the remaining 63 blocks, the adaptive threshold calculation can be reduced by only performing a block type classification process. The threshold calculation operation is performed five times when all block types occur, and only the block type separation process can be performed for the remaining 59 blocks, so 93% adaptive threshold calculation operation can be reduced.

• The Korean Journal of Nuclear Medicine
• /
• v.27 no.2
• /
• pp.155-160
• /
• 1993

The identification of viable myocardium in patients with coronary artery disease and left ventricular dysfunction is an issue of increasing clinical relavance in the current era of myocardial revascularization. There are at least two forms of reversible myocardial dysfunction. Early reperfusion does not always lead to immediate functional improvement; rather, the return of contractility in tissue salvaged by reperfusion is delayed for hours, days or even weeks, a phenomenon that has been termed "stunned myocardium". Some patients with coronary artery disease show myocardial dysfunction at rest which are associated with reduced perfusion, and which disappear after revascularization; this phenomenon has been termed "hibernating myocardium". Recently, cardiac imaging techniques that evaluate myocardial viability on the basis of perfusion-contraction mismatch and inotropic reserve have gained substantial popularity and clinical success. This review focus on the application of $^{201}TI$ and $^{99m}Tc-MIBI$ to address myocardial viability in patients with hibernating and stunned myocardium. It is clear that 4-hour redistribution images of $^{201}TI$ underestimate ischemia and overestimate scar. Delayed imaging and reinjection imaging have been developed for the assessment of viability. Among many protocols suggested, stress-redistribution-reinjection imaging gained most popularity. Although $^{99m}Tc-MIBI$ could identify myocardial viability, $^{201}TI$ reinjection technique was regarded as superior to it. In conclusion, $^{201}TI$ stress, 4-hr rest redistribution, and reinjection imaging technique may be the most preferable method for evaluation of myocardial viability.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.2
• /
• pp.29-39
• /
• 2017

This paper presents a unified framework to efficiently and realistically simulate surface and wave foams. The framework is designed to first project 3D water particles from an underlying water solver onto 2D screen space in order to reduce the computational complexity of determining where foam particles should be generated. Because foam effects are often created primarily in fast and complicated water flows, we analyze the acceleration and curvature values to identify the areas exhibiting such flow patterns. Foam particles are emitted from the identified areas in 3D space, and each foam particle is advected according to its type, which is classified on the basis of velocity, thereby capturing the essential characteristics of foam wave motions. We improve the realism of the resulting foam by classifying it into two types: surface foam and wave foam. Wave foam is characterized by the sharp wave patterns of torrential flow s, and surface foam is characterized by a cloudy foam shape even in water with reduced motion. Based on these features, we propose a technique to correct the velocity and position of a foam particle. In addition, we propose a kernel technique using the screen space density to efficiently reduce redundant foam particles, resulting in improved overall memory efficiency without loss of visual detail in terms of foam effects. Experiments convincingly demonstrate that the proposed approach is efficient and easy to use while delivering high-quality results.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.676-682
• /
• 2012

The objectives of this study focused on measuring chlorophyll fluorescence related to drought stress comparing some parameters. Almost parameters were declined although they were not significant on the basis of mean values of fluorescence of total leaf area. While the ratio of fluorescence intensity variable chlorophyll ($F_V$) to fluorescence intensity maximal chlorophyll ($F_M$) was not changed, the effective quantum yield of photochemical energy conversion in photosystemII (${\Phi}PSII$) and chlorophyll fluorescence decrease ratio ($R_{fd}$) were slightly reduced, indicating inhibition of the electron transport from quinone bind protein A ($Q_A$) to quinone bind protein B ($Q_B$). Some parameters such as non-photochemical quenching rate ($NPQ_{_-LSS}$) and coefficients of non-photochemical quenching of variable fluorescence (qN) in mid-zone of leaf and near petiole zone leaf were significantly enhanced within 4 days after drought stress, which can be used as physiological stress parameters. Decrease in ${\Phi}PSII$ could was significantly measured in all leaf zones. In conclusion, three parametric evidences for chlorophyll fluorescence responses such as ${\Phi}PSII$, NPQ, and qN insinuated the possibility of photophysiological indices under drought stress.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.79-90
• /
• 2006

The partitioning level of a catchment becomes an issue if the calculated results from different levels show the same performance regardless of the levels. This study aims to identify the proper processing level of spatial resolution for the SWMM model application in an urban area. Using GIS overlaying technique, the division of subcatchments as a hydrologic similarity unit (HSU) is achieved with a comprehensive consideration of surface slope conditions, flow directions of storm sewers, and current land cover situation. Three surface-sewer alternatives are made on the basis of three different levels of surface divisions as well as the number of sewer connections and used as runoff simulation fields for the application of SWMM. As the result, it is found that the effect of a spatial resolution on the surface runoff results is not significant. On the other hand, the accumulated pollution load from an unit subcatchment, which is built by aggregation of several unit subcatchments consisting of various land cover conditions is reduced through the deterioration of surface spatial resolution. Although overall runoff pattern and accumulated runoff are little affected by spatial resolution, the simulated runoff from sewer outlet shows slight difference at the peak appearance time. The gap between surface pollution load accumulated and it discharged from the sewer outlet in a surface-sewer alternative during runoff period is monitored but the level of error is less than 5-10% except the lowest spatial resolution case.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.11
• /
• pp.1563-1567
• /
• 2017

Objective: The influence of substituting steam-flaked corn (SFC) for dry rolled corn (DRC) on feedlot cattle growth performance and dietary net energy when cattle are allowed either ad libitum or 2-h restricted access to the finishing diet was evaluated. Methods: Treatment effects were tested using 96 crossbred steers ($251{\pm}2kg$) during the initial 56 d of the finishing phase. Cattle were blocked by weight and randomly assigned within blocks to 16 pens (4 pens/treatment). Bunk space was sufficient (41 cm/head) to allow all steers access to the feed bunk at the same time. Treatments consisted of two finishing diets containing (dry matter basis) 77.1% corn grain processed by dry rolling (density = 0.50 kg/L) or steam flaking (density = 0.36 kg/L). Cattle were fed twice daily at 06:00 and 14:00 h, allowing for approximately 5% residual. In the case of restricted feeding, steers were allowed access to feeders for 1 h following each feeding, after which residual feed was withdrawn. Results: There were no treatment interactions on dry matter intake (DMI), average daily gain (ADG), gain efficiency (G:F), or dietary net energy (NE). Restricting feed access time reduced (p<0.01) feed intake, and hence, ADG. Substitution of SFC for DRC increased (p<0.01) ADG, feed efficiency (G:F), and estimated dietary NE, without affecting DMI. Based on tabular net energy of maintenance ($NE_m$) value (2.18 Mcal/kg) for DRC, the estimated $NE_m$ value for SFC using the replacement technique, averaged 2.44 Mcal/kg; an improvement of 10.7%. The ratio of observed-to-expected dietary NE was not affected by feed access time. Conclusion: Substitution of SFC for DRC in finishing diets for feedlot cattle enhanced ADG, gain efficiency, and the NE value of the diet. Although restriction of feed access time depressed DMI and ADG, it did not affect the comparative benefit of steam flaking toward enhancement of ADG, G:F, and dietary NE.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.165-174
• /
• 2011

This research aims at the optimal constitution of sensors required to identify the structural shortcoming of roller-coaster. In this research we analyzed the dynamic characteristics of roller-coaster by three dimensional FE modelling, decided on the appropriate location and number of sensors through optimal transducer theory, abstracted the mathematical value of modal features before and after damage on the basis of optimally placed and numbered sensors. and then presented it as a primary information about the basic structure which would be applied to damage estimation. As a target structure, the roller-coater at Seoul Children's Grand Park was chosen and built as a model reduced by one twentieth in size. In order to consider the Kinetics features particular to the roller-coaster structure, we made an exact three-dimensional FE modelling for the model structure by means of Spline function. As for the proper location and number of sensors, it was done by applying EIM and EOT. We also estimated the damage from the combination of strength, flexibility, and model corelation after abstracting the value of modal features. Finally the optimal transducer theory presented here in this research was proved to be valid, and the structural damage was well identified through changes in strength and flexibility. As a result, we were able to present the optimal constitution of sensors needed for the analysis of dynamic characteristics and the development of techniques in dynamic characteristics, which would ultimately contribute to the development of health monitoring for roller-coaster.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.631-643
• /
• 2006

Moving objects in a mobile environment to change their position based on the change of time require a query with their position as a basis. Efficient Regional Decision for Continuous Skyline Queries requires objectively pre-calculating the OSR(Optimal Skyline Region) regardless of the speed and direction of the moving objects. It proposes techniques to reduce the frequency of continuous queries by choosing a VCircle(Validity Circle) as safe location which has radius of the distance to the closest region with position on the moving object at center. But, a VCircle's area varies based on the Moving object's position from first marked time of continuous query. Therefore, the frequency of its continuous query is variable and also when the object moves inside of OSR, query can re-occur frequently In this paper, we suggest a technique of selecting an IVCircle(Interior Validity Circle) in a Skyline Region as the static Safe Region using the characteristics of the OSR. An Interior IVCircle can be calculated in advance when the OSR is decided. Our experiment shows that the frequency of using IVcircle as safe region reduced than that of using VCircle as safe region by 52.55%.

• Korea journal of population studies
• /
• v.25 no.1
• /
• pp.51-82
• /
• 2002

This paper focuses on the process of national family politics through the project of family planning which became one of the main factors that brought the structural change in Korean families after 1960's. The family planning was established under the national project which was tightly driven by the government, and the new families were built artificially and coercibly by the plan rationality. The various and diverse forms of the national family politics were revealed in the process of the project. For example, the image of the modern families was forcedly adopted in order to justify the project, the families in this period were under microscopic surveillance in order to accomplish th e project effectively , etc. Modern nuclear families were derived through the economical and social support on the families only with a few number of children, and the structural change was made through the medical technique and support. Consequently, during the forty years after the project, the size of the families were reduced drastically, various and diverse forms of families were generated, and the modern family action and value were wide spread and generalized. Through the project, the government has been establishing th family patterns and norms which were so suitable to the modernization project that the families were able to be pulled into public sphere. The family problems in this process became very serious. However the government repeatedly forced the families to be the reoresentative of welfare state through new-modern political discourses. The welfare through the family is coerced to replace the weakness of welfare state. However the family is not the subject of the welfare, but the object of the welfare. The governmental family politics must make more efforts to gave the families to be the object to the welfare.