• Current Optics and Photonics
• /
• v.1 no.6
• /
• pp.613-617
• /
• 2017

Due to optimal advances such as chromatic performance, durability, low power consumption, high efficiency, long-lifetime, and excellent environmental friendliness, white LEDs (WLEDs) are widely used in vehicle front lighting, backlighting, decorative lighting, street lighting, and even general lighting. In this paper, the remote packaging WLEDs (RP-WLEDs) with bi-layer red-emitting $Sr_2Si_5N_8:Eu^{2+}$ and yellow-emitting YAG:Ce phosphor was proposed and investigated. The simulation results based on the MATLAB software and the commercial software Light Tools indicated that the color rendering index (CRI) of bi-layer phosphor RP-WLEDs had a significant increase. The CRI had a considerable increase from 72 to 94. In conclusion, the results showed that bi-layer red-emitting $Sr_2Si_5N_8:Eu^{2+}$ and yellow-emitting YAG:Ce phosphor could be a prospective approach for manufacturing RP-WLEDs with enhanced optical properties.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.389-395
• /
• 2017

This paper investigates a method to improve the lighting performance of white light-emitting diodes (WLEDs), which are packaged using two separate remote phosphor layers, a yellow-emitting YAG:Ce phosphor layer and a red-emitting ${\alpha}-SrO{\cdot}3B_2O_3:Sm^{2+}$ phosphor layer. The thicknesses of these two layers are $800{\mu}m$ and $200{\mu}m$, respectively. Both of them are examined in conditions where the average correlated color temperatures (CCT) are 7700 K and 8500 K. For this two-layer model, the concentration of red phosphor is varied from 2% to 30% in the upper layer, while in the lower layer the yellow phosphor concentration is kept at 15%. It was found interestingly that the lighting properties such as color rendering index (CRI) and luminous flux are enhanced significantly, while the color uniformity is maintained in a relatively close range to the one of one-layer configuration (measured at the same correlated color temperature). Besides, the transmitted and reflected light of each phosphor layer are revised by combining Kubelka-Munk and Mie-Lorenz theories. Through analysis, it is demonstrated that the packaging configuration of two-layer remote phosphor that employs red-emitting ${\alpha}-SrO{\cdot}3B_2O_3:Sm^{2+}$ phosphor particles provides a practical solution for general WLEDs lighting.

• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.145-150
• /
• 2006

Various colors of light emitting diodes(LED) and four-band white light sources are obtained using a violet LED and various phosphor films. $BaMg_2Al_{16}O_{27}:Eu\;(blue),\;SrGa_2S_4:Eu\;(green),\;and\;Eu(TTA)_3(PTA)$ (red) phosphors are dispersed in poly-vinyl-alcohol aqueous solutions, and phosphor films are prepared by coating the suspensions to PET film. The narrow band emission of $Eu(TTA)_3(PTA)$ phosphor has excellent red luminescent property for four-band white light excited by the violet LED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1303-1304
• /
• 2009

In order to apply to the White light emitting diodes (WLEDs), The $Y_2SiO_5:Eu^{3+}$ as red phosphor was synthesized by solid state reaction method. The highest emission of $Y_2SiO_5:Eu^{3+}$ was shown when the $Eu^{3+}$ concentration was 0.02. A single phase was observed from X-ray diffraction (XRD) analysis of synthesized samples and secondary phase wasn't found.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.192-197
• /
• 2014

Red-emitting nitride phosphors recently attracted considerable attention because of their high thermal stability and high color rendering index properties. For excellent phosphor of white light-emitting-diode, ternary nitride phosphor of $Sr/SmSi_5N_8:Eu^{2+}$ with different $Eu^{2+}$ ion concentration were synthesized by solid state reaction method. In this work, red-emitting nitride $Sr/SmSi_5N_8:Eu^{2+}$ phosphor was successfully synthesized by using multi-step high frequency induction heat treatment. The effects of molar ratio of component and experimental conditions on luminescence property of prepared phosphors have been investigated. The structure and luminescence properties of prepared $Sr/SmSi_5N_8:Eu^{2+}$ phosphors were investigated by XRD and photoluminescence spectroscopy. The excitation spectra of $Sr/SmSi_5N_8:Eu^{2+}$ phosphors indicated broad excitation wavelength range of 300 - 550 nm, namely from UV to visible area with distinct enhanced emission peaks. With an increase of $Eu^{2+}$ ion concentration, the peak position of emission in spectra was red-shifted from 613 to 671 nm. After via multi-step heat treatment, prepared phosphor showed excellent luminescence properties, such as high emission intensity and low thermal quenching, better than commercial phosphor of $Y_3Al_5O_{12}:Ce^{3+}$. Using $Eu_2O_3$ as a raw material for $Eu^{2+}$ dopant with nitrogen gas flowing instead of using commercial EuN chemical for $Sr/SmSi_5N_8:Eu^{2+}$ synthesis is one of characteristic of this work.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2477-2480
• /
• 2007

MgAl2O4:Eu3+ red-light emitting powder phosphor was prepared at temperature as low as 500 oC within a few minutes by using the combustion route. The prepared powder was characterized by X-ray diffraction, scanning electron microscopy and Fourier-transform infrared spectrometry. The luminescence of Eu3+-activated MgAl2O4 shows a strong red emission dominant peak around 611 nm, which can be attributed to the 5D0-7F2 transition of Eu3+ ions from the synthesized phosphor particles under excitation (394 nm). Electron paramagnetic resonance (EPR) measurements at the X-band showed that no signal could be attributed to Eu2+ ions in MgAl2O4.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1350-1352
• /
• 2008

Research on down conversion phosphor materials is the key for the development of solid state lighting (SSL). Especially finding alternative red phosphor for white LEDs based on blue or NUV LEDs are important research task. Under this view, we have synthesized a series of $Eu^{3+}$ substituted $La_2W_{2-x}Mo_xO_9$ (x = 0 ~ 2, insteps of 0.1) red phosphor and characterized by X-ray diffraction (XRD) and photoluminescence. XRD results reveal a phase transition from triclinic to cubic structure for $x\;{\geq}\;0$. All the compositions show broad charge transfer band due to charge transfer from oxygen to tungsten/molybdenum and red emission due to $Eu^{3+}$ ions. Select compositions show high red emission intensity compared to the commercial red phosphor under NUV/blue ray excitation. Hence, this candidate can be possible red emitting phosphors for white LEDs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.494-499
• /
• 2023

In this paper, in order to apply the CF (color filter) type of the micro light emitting device (Micro LED) display method, a study on the manufacturing process of red and green phosphor inks for the inkjet process was conducted. The blue light-emitting KSF and LuAG phosphors were respectively used to control the phosphor particle size to about 1㎛, and a phosphor ink was prepared by synthesizing with a low-viscosity solution (IPA/Eg). A chemical dispersion method was applied to selectively control the dispersion characteristics in the manufacture of phosphor inks, and in particular, phosphor inks with a dispersant applied a dispersant secured stable dispersion characteristic compared to phosphor inks without a dispersion process. Therefore, it seems possible to manufacture CF for Micro LED through an inkjet process capable of controlling the dispersion characteristics of phosphor ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.588-590
• /
• 2008

Yellow-emitting $Y_3Al_5O_{12}$:Ce nanocrystalline phosphor and orange-emitting CdS:Mn/ZnS core/shell quantum dots were prepared by a modified polyol and a reverse micelle chemistry, respectively. To compensate a poor color rendering index of YAG:Ce nanocrystalline phosphor due to the lack of red spectral component, CdS:Mn/ZnS quantum dots were blended into YAG:Ce. Based on spectral evolutions in the blended systems, hybrid white light emitting diodes are fabricated and characterized.

• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.312-317
• /
• 2017

In the construction of a white LED, the region of the red emission is a very important factor. Red light emitting materials play an important role in improving the color rendering index of commercial lighting. These materials also increase the color gamut of display products. Therefore, the development of novel phosphors with red emission and the study of color tuning are actively underway to improve product quality. In the present study, heuristic algorithms were used to search for phosphors capable of increasing the color rendering index and color gamut. Using a heuristic algorithm, the phosphors that were identified were $SrGe_4O_9:Mn^{4+}$ and $BaGe_4O_9:Mn^{4+}$. Emission spectra study confirmed that these phosphors emit light in the deep red wavelength region, which can fulfill the requirement for the improvement in color rendering index and color gamut for a white LED.