• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.63-73
• /
• 2016

PURPOSES : The objective of this study was to analyze variations in the vehicle driving behavior characteristics on signalized intersections according to the use of traffic enforcement camera (red light camera). METHODS : In order to analyze the driving behavior characteristics on signalized intersections when red light camera are installed, the target sites for investigation were selected depending on whether the red light camera is installed and accident rates increased after the installation. In particular, to analyze the characteristics of dilemma zones in signalized intersections, approach speed and deceleration speed of 3 type vehicles (passing vehicles during a yellow light, stopping at a yellow light, passing vehicles during a green light) were examined. Based on these data, the starting point, ending point, and distance of the dilemma zones were calculated. Also, the locations of increased traffic accidents and decreased accidents after the installation of the equipment were distinguished when analyzing the traffic accident characteristics. RESULTS : Analysis results revealed that there was a tendency for the dilemma zone distance to decrease after the installation of equipment(red light camera) in most sites. This tendency was found to be due to the decrease in the approaching speed of vehicles at intersections after the installation of equipment, resulting in the starting and ending points of dilemma zone to become closer to the stop line. Moreover, analysis showed that the number of traffic accidents decreased for most intersections after the installation of equipment and safety of the intersections increased somewhat. CONCLUSIONS : In general, installation of equipment(red light camera) caused the intersections approaching speed and dilemma zone distance to decrease. Decision-making is difficult for drivers in the dilemma zone, so the decrease in the dilemma zone distance implies an improvement in traffic safety. Furthermore, the number of accidents within intersections significantly decreased after the equipment was installed, leading to the conclusion that installation of the equipment affected the decrease in traffic accidents.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.119-127
• /
• 2015

PURPOSES : Before-and-after studies of red light cameras were conducted with the aim of reducing the number of side right-angle collisions. Three different methods were used for the before-and-after studies, and the analysis results were compared. METHODS : This research used the naive before-and-after method, the comparison-group method, and the empirical Bayes method to study the effects of red light cameras on side-angle collisions. The results of the three before-and-after methods were compared and interpreted in terms of safety indications at signalized intersections. RESULTS : The research results showed that side right-angle collisions can be reduced by installing red light cameras at signalized intersections. All three methods guarantee safety improvements of 25~30% on average. With regard to the results of each method, the naive before-and-after method, the comparison-group method, and the empirical Bayes method showed safety improvements of 25.6%, 27.8%, and 29.7%, respectively. CONCLUSIONS : It was concluded that red light cameras are an effective countermeasure to improve intersection safety. In particular, by installing red light cameras, side right-angle collisions can be reduced by up to approximately 25~30%.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.67-73
• /
• 2012

PURPOSES : This study deals with the effects on the installation of RLC(Red Light Camera). The objective is to analyze the effects of accident reduction after the installation of RLC. METHODS : In pursuing the above, the study uses the 703 accident data occurred at the 64 intersections which RLC are installed or not installed. RESULTS : The main results are as follows. First, Poisson RLC accident model developed in this study is analyzed to be statistically significant. Second, using the above developed model, 33 intersections among 40 intersections are predicted to have the decreasing effects of accidents after the installation of RLC. Finally, the reduction effects are analyzed to be affected by ADT and the number of left-turn lane. CONCLUSIONS : This study is expected to improve the efficiency of RLC and to help in decision-making of RLC installation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.767-773
• /
• 2008

This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.115.5-115
• /
• 2002

In this paper, we introduce a system that detects all kinds of violations at a street intersection such as red light running, speed violation, stop line violation and lane violation by tracking individual vehicles. Two cameras are used for defecting violations. One is an analog camera for real-time tracking and the other is a digital camera for license plate reading. This system is connected to the traffic signal system controller and monitors the red, arrow, yellow and green phases of an approach. Two loops in the road are used to detect vehicle approach and speed. The system takes pictures of all vehicles passing a second loop and tracks the vehicles until they go out a street intersection...

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.707-716
• /
• 2020

Spectroradiometers have recently been drawing great attention in earth observing communities for its capability for obtaining target's quantitative properties. In particular, light-weighted multispectral cameras are gaining popularity in many field domains, as being utilized on UAV's. Despite the importance of the radiometric accuracy, studies are scarce on the performance of the inexpensive multispectral camera sensors that have various applications in agricultural, vegetation, and water quality analysis. This study conducted assessment of radiometric accuracy for MicaSense RedEdge-MX multispectral camera, by comparing the radiometric data with an independent hyperspectral sensor having NIST-traceable calibration quality. The comaprison showed that radiance from RedEdge-MX is lower than that of TriOS RAMSES by 5 to 16% depending on the bands, and the irradiance from RedEdge-MX is also lower than RAMSES by 1~20%. The correction coefficients for RedEdge-MX alculated through the 1-st and the 3-rd order regression analysis were presented as a result of the study.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.49-57
• /
• 2010

This case study investigated red light violations at CBD, suburban and rural signalized intersections in chungbuk. The goal of this study is to understanding the collection between red light violations and various driver, vehicles and environmental factors. This study uses descriptive statistics analysis and logistics analysis with SPSS 12.0 software. The major results of this study are as follows. First, red light violations occurred at rural and CBD more than suburban area. Second, About 81.1% of the violators were traveling at or below the posted speed limit. Moreover, 77.3% of the violations occurred within 2 seconds after the on set of red light. Finally, the logistic regression model, which is statistically significant(chisquare=0.000, McFadde=0.265)was developed, and includes the local type(CBD/suburban/rural), violators' gender, season, vehicle type, time of day, vehicle speed as the independent variables. In this study did not find significant relationship between red light violators' age and their driving behavior approaching signalized intersections.

• 한국도로학회:학술대회논문집
• /
• 2010.03a
• /
• pp.159-166
• /
• 2010

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.784-793
• /
• 2016

We present a single shot low coherence white light Hilbert phase microscopy (WL-HPM) for quantitative phase imaging of Si optoelectronic devices, i.e., Si integrated circuits (Si-ICs) and Si solar cells. White light interferograms were recorded by a color CCD camera and the interferogram is decomposed into the three colors red, green and blue. Spatial carrier frequency of the WL interferogram was increased sufficiently by means of introducing a tilt in the interferometer. Hilbert transform fringe analysis was used to reconstruct the phase map for red, green and blue colors from the single interferogram. 3D step height map of Si-ICs and Si solar cells was reconstructed at multiple wavelengths from a single interferogram. Experimental results were compared with Atomic Force Microscopy and they were found to be close to each other. The present technique is non-contact, full-field and fast for the determination of surface roughness variation and morphological features of the objects at multiple wavelengths.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.98-103
• /
• 2017

In Korea, the guideline for the bridge safety inspection requests to assess surface degradation, including crack, efflorescence, spalling, and so on, for the rating of concrete bridges. Currently, the assessment of efflorescence is performed based on the visual inspection of expertized engineers, which may result in subjective inspection result. In this study, a novel method using a hyperspectral camera is proposed for objective and accurate assessment of concrete efflorescence. The hyperspectral camera acquires the light intensity for a number of continuous spectral bands of light for each pixel in an image, which makes the hyperspectral imaging technique provides more detailed information than a color camera that collects intensity for only three bands corresponding to RGB (red, green, and blue) colors. A stepwise assessment algorithm is proposed based on the spectral features to decompose efflorescence area from the inspected concrete area. The algorithm is tested in the laboratory test using two concrete specimens, one of which is dark colored with efflorescence on a surface while the other is bright concrete without efflorescence. The test shows high accuracy and applicability of the proposed efflorescence assessment using a hyperspectral camera.