• Resources Recycling
• /
• v.31 no.6
• /
• pp.81-91
• /
• 2022

The use of lithium-ion batteries increases significantly with the rapid spread of electronic devices and electric vehicle and thereby an increase in the amount of waste batteries is expected in the near future. Therefore, studies are continuously being conducted to recover various resources of cathode active material (Ni, Co, Mn, Li) from waste battery. In order to recover the cathode active material, black mass is generally recovered from waste battery. The general process of recovering black mass is a waste battery collection - discharge - dismantling - crushing - classification process. This study focus on the crushing/classification process among the processes. Specifically, the particle size distribution of various samples at each crushing/classification step were evaluated, and the particle shape of each particle fraction was analyzed with a microscope and SEM (Scanning Electron Microscopy)-EDS(Energy Dispersive Spectrometer). As a result, among the black mass particle, fine particle less than 74 ㎛ was the mixture of cathode and anode active material which are properly liberated from the current metals. However, coarse particle larger than 100 ㎛ was present in a form in which the current metal and active material were combined. In addition, this study developed a PBM(Population Balance Model) system that can simulate two-species mixture sample with two different crushing properties. Using developed model, the breakage parameters of two species was derived and predictive performance of breakage distribution was verified.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.1
• /
• pp.101-109
• /
• 2016

During road construction, minimizing haul and return distances as well as keeping a balance between cut and fill quantities are two of the key tasks for earthmoving operation planning. The result of the earthwork planning has a significant impact on the construction cost and duration. Although there have been research efforts regarding optimized earthwork planning using linear programming, the current practice of selecting earthwork planning methods typically depends on a field manager's intuitive and/or experimental knowledge. Furthermore, there is no system considering earthwork influential field factors including the transportation distance, the earthwork quantity, and the recycling ratio of earth volume. Therefore, this research focuses on the development of such a model for planning the optimized earthwork to increase the efficiency of a road construction. The proposed model is developed based upon the transportation problem method which is a part of Linear Programming. The application result of optimization model on a case study shows that the duration and cost for earthwork ha sbeen reduced approximately 19% and 11% respectively

• Resources Recycling
• /
• v.30 no.3
• /
• pp.3-17
• /
• 2021

Currently, there is a drain of natural resources, environmental contamination, generation of waste, and problems of the earth's climate by CO₂ emissions according to mass production and overconsumption of mankind. It is effectuated by a linear economy that involves manufacturing products, use, and waste repeatedly; there is no guarantee in the lives of humans and the future of the globe if we do not find alternative proposals. For a sustainable developing society and to overcome the present global problems, we must successively change to a circular economy from a linear economy. The circular economy has the concept of an extended value chain in recovery, reuse, remanufacturing, and recycling, instead of discarding after the use of manufactured goods. New business models of circular economy have been realized to save the earth ecology and sustainable developing society in serious recognition of the linear economy system. New business models are established by creating a vision and developing a program, and by renovating technology, law, and financial support through a worldwide government policy.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.67-76
• /
• 2022

The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO₂-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.487-496
• /
• 2019

Objective: The purpose of this study was to create soil contamination maps using QGIS (Quantum Geographic Information System) and suggest selection methods for soil pollution sources for preferential investigation in a soil contamination survey. Method: Data from soil contamination surveys over five years in Gyeonggi-do Province, South Korea (2013-2017) were used for making soil contamination maps and analyzing the density of survey points. By analyzing points exceeding the concern level of soil contamination, soil pollutant sources for priority management were identified and selection methods for preferred survey points were suggested through a study of the model area. Results: A soil contamination survey was conducted at 1,478 points over five years, with the largest number of surveys conducted in industrial complex and factory areas. Soil contamination maps for copper, zinc, nickel, lead, arsenic, fluoride, and total petroleum hydrocarbons were made, and most of the survey points were found to be below concern level 1 for soil contamination. The density of the survey points is similar to that of densely populated areas and factory areas. The analysis results of points exceeding the criteria showed that soil pollutant sources for priority management were areas where ore and scrap metals were used and stored, traffic-related facilities areas, industrial complex and factory areas, and areas associated with waste and recycling. According to the study of the model area, the preferred survey points were traffic-related facilities with 15 years or more since their construction and factories with a score of 10 or more for soil contamination risk. Conclusion: Soil contamination surveys should use GIS for even regional distribution of survey points and for the effective selection of preferred survey points. This study may be used as guidelines to select points for a soil contamination survey.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.3
• /
• pp.77-86
• /
• 2010

In this study, the model of the indirect wind suction waste sorting machine for characteristics of the screening of waste was studied using computational fluid dynamics and the drag coefficient for the model and the suction wind speed were obtained. The wind separator are developing by installing a cyclone air outlet to the suction blower impeller waste is selective in a way that does not pass the features and characteristics of the inlet pipe of the pressure loss and separation efficiency can have a significant impact on. Using Wind separator for selection of waste in the waste prior research on the aerodynamic properties are essential. For plastic cases, it is reasonable to take the drag coefficient between 0.8 and 1.0, and for cans, compression depending on whether the cans, the drag coefficient is in the range from 0.2 to 0.7. The separation efficiency of waste as change suction speed was the highest efficiency when the suction speed was 25~26 m/s. Shape of the inlet, depending on how the transfer pipe of the duct pressure loss occurs because the inlet velocity changes through the appropriate design standards to allow for continued research is needed.

• Journal of Korean Society of Water and Wastewater
• /
• v.9 no.2
• /
• pp.108-117
• /
• 1995

The applicability to Korea is examined of a pond system which treats and recycles wastewaters. Air temperature and solar radiation of the pond systems at Corinne, Utah, and Eudora, Kansas, which are located in temperate regions of the U.S., are compared with those of Kimpo lying in the mid-western part of Korea. Analyzed are also $BOD_5$ and SS concentrations, algal concentrations, pH levels, and water temperature of the two systems. Air temperature of Kimpo is quite similar to that of the two systems, and solar radiation of Kimpo is more conducive than that of the systems to the growth of algae during summer. Analysis of $BOD_5$ and SS concentrations in the final effluent of the systems shows that they meet the secondary treatment standards. The study demonstrates that wastewater treatment pond system which is similar in design to the systems can be reliably utilized at Kimpo, Korea. A model is proposed which can integrate a pond system with aquaculture and agriculture.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.4
• /
• pp.437-446
• /
• 2006

Mobilecomputer offers more fundamental role than role assistance enemy of modern technology equipment and new Information <중략> These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that is done radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2167-2168
• /
• 2006

Mobilecomputer of offers more fundamental role than role assistance enemy of modem technology equipment and new Information Technology can reconsider, and reconstruct creatively accuracy of physiological concept. That military register symptoms are developed of disease, before far before rehalibitation, of for possibility that can intervene in process that motive change of military register symptoms after rehalibitation. But, that many parameters become analysis target and mathematical settlement and equalization system of noted data of that is huge, same time collection of all datas can lift difficulty etc.. These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that isdone radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.664-665
• /
• 2016

This paper proposes an identification system based on QR (Quick Response) code for production and disposal information of Internet of Things (IoT) devices. Three thousands and five hundreds of electronic devices have replaced and discarded in South Korea in a year, and twenty millions to fifty millions tons of e-wastes have happened throughout the world every year. According to Gartner, market research institution, the number of IoT devices will increase from 2.3 billions in 2013 to 30 billions in 2020, however, the regulations and systems which take into account environment were not prepared. The identification systems for reflecting information of devices, which are produced or discarded, are required to resolve the problem. The proposed identification system based on QR code can store much more massive data such as the producer, product's model, serial number, recycling rate, recovering rate, recyclability rate, recoverability rate than RFID (Radio-Frequency Identification). Also, users can immediately recognize production and disposal information by a QR code application in a smartphone.